Ashly FX-125.4 Bruksanvisning

Ashly Mottaker FX-125.4

Les nedenfor 📖 manual på norsk for Ashly FX-125.4 (23 sider) i kategorien Mottaker. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/23

FX SERIES

FX-500.4

FX-500.2

FX-125.4

FX-125.2

FX-60.4

FX-60.2

4- and 2-channel

Power Amplifiers

Operating Manual

FX Amplifier • Operating Manual

Please read the following

important technical, safety

and environmental notices

before installing and using your

amplifier.

Technical Notices

All reasonable design and

engineering steps have been taken

to ensure that these amplifiers

always perform satisfactorily in

their intended application and

environment and will provide

appropriate levels of support

to ensure that all reasonable

customer needs and expectations

are met. Such support however

is contingent on the following

provisions.

These amplifiers are Class-I

products and should be installed

with a mains cable including the

required earth connection to

comply with the Safety Class-I.

These amplifiers should always

be installed by competent and

qualified personnel. Amplifier

damage or failure caused by

installation or operational errors

may invalidate support, warranty or

guarantees of performance.

These amplifiers are not suitable

for use in locations where they may

be accessible to minors.

These amplifiers are intended

to be used specifically for the

amplification of audio signals

and for connection to moving-

coil loudspeaker systems. Use of

these amplifiers for amplification

of signals outside the audio

band (20Hz to 20kHz) or to drive

transducers other than moving-

coil loudspeakers may invalidate

support, warranty or guarantees of

performance.

These amplifiers should only

be used within professionally

installed and configured audio

systems comprising input and

output ancillary equipments that

is known to be of an appropriate

level of performance and in good

operating condition. Any damage

to, or unsatisfactory performance

from, these amplifiers caused

by inadequate or failed input or

output ancillaries may invalidate

support, warranty or guarantees of

performance.

These amplifiers are intended to be

installed and operated indoor in a

controlled environment (pollution

degree, PD2) within an ambient

temperature range of 0°C to 40°C.

These amplifiers are not intended

for use above 2000 meters above

sea level. Amplifiers installation

or operated in environments

outside these limits may invalidate

support, warranty or guarantees of

performance.

Specific warranty terms are the

responsibility of the amplifier re-

seller.

Safety and Environmental

Notices

Note: The intent of the lightning

flash with arrowhead symbol

in a triangle is to alert the user

to the presence of uninsulated

“dangerous” voltage within the

product’s enclosure that may be of

sufficient magnitude to constitute

a risk of electric shock to humans.

Note: The intent of the exclamation

point within an equilateral triangle

is to alert the user to the presence

of important safety, and operating

and maintenance instructions in

this manual.

Technical and Safety Notices

WARNING! TO PREVENT FIRE

OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS EQUIPMENT TO RAIN

OR MOISTURE.

Ambient Temperature Note:

If this equipment is operated

in a confined or multiple rack

installation, the internal ambient

operating temperature may exceed

the external ambient temperature.

It is important to ensure in these

circumstances that the published

maximum operating temperature

for the equipment is not exceeded.

Reduced Air Flow: Ensure that rack

or other closed installation does not

restrict the cooling airflow required

for safe and reliable operation of

the equipment.

FX Amplifier • Operating Manual

Important Safety Instructions and Environmental Statement

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near

water.

Do not submerge the equipment in

water or liquids.

Do not use any aerosol spray,

cleaner, disinfectant or fumigant

on, near or into the equipment.

Clean only with a dry cloth.

Do not block any ventilation

opening. Install in accordance with

the manufacturer’s instructions.

Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus

(including amplifiers) that produce

heat.

To reduce the risk of electrical

shock, the power cord shall be

connected to a mains socket

outlet with a protective earthing

connection.

Do not defeat the safety purpose

of the polarized or grounding type

plug. A polarized plug has two

blades with one wider than the

other. A grounding type plug has

two blades and a third grounding

prong. The wide blade or the third

prong are provided for your safety.

If the provided plug does not fit into

your outlet, consult an electrician

for replacement of the obsolete

outlet.

Protect the power cord from being

walked on or pinched particularly

at plugs, convenience receptacles,

and the point where they exit from

the apparatus.

Do not unplug the unit by pulling on

the cord, use the plug.

Only use attachments/accessories

specified by the manufacturer.

Unplug this apparatus during

lightning storms or when unused

for long periods of time.

Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus has

been damaged in any way, such

as power supply cord or plug is

damaged, liquid has been spilled

or objects have fallen into the

apparatus, the apparatus has been

exposed to rain or moisture, does

not operate normally, or has been

dropped.

The appliance coupler, or the

AC Mains plug, is the AC mains

disconnect device and shall remain

readily accessible after installation.

Adhere to all applicable, local

codes.

Consult a licensed, professional

engineer when any doubt or

questions arise regarding a

physical equipment installation.

Environmental Statement

This product complies with

international directives, including

but not limited to the Restriction

of Hazardous Substances (RoHS)

in electrical and electronic

equipment, the Registration,

Evaluation, Authorization and

restriction of Chemicals (REACH)

and the disposal of Waste Electrical

and Electronic Equipment (WEEE).

Consult your local waste disposal

authority for guidance on how

properly to recycle or dispose of

this product.

Produkspesifikasjoner

Merke:	Ashly
Kategori:	Mottaker
Modell:	FX-125.4

Trenger du hjelp?

Hvis du trenger hjelp med Ashly FX-125.4 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Mottaker Ashly Manualer

Ashly nXp1.54 Bruksanvisning

13 Januar 2025

Ashly NXE1.52 Bruksanvisning

13 Januar 2025

Ashly nXp1.52 Bruksanvisning

13 Januar 2025

Ashly PEMA 4125.70C Bruksanvisning

13 Januar 2025

Ashly PEMA 4125C Bruksanvisning

13 Januar 2025

Ashly nXp3.02 Bruksanvisning

13 Januar 2025

Ashly nXp3.04 Bruksanvisning

13 Januar 2025

Ashly nXe3.02 Bruksanvisning

13 Januar 2025

Ashly SRA-4150 Bruksanvisning

13 Januar 2025

Ashly nXe3.04 Bruksanvisning

13 Januar 2025

Mottaker Manualer

Nyeste Mottaker Manualer

Futaba R7108SB Bruksanvisning

29 Mars 2025

MB Quart FA2-2000.1 Bruksanvisning

29 Mars 2025

MB Quart FA2-1500.1 Bruksanvisning

29 Mars 2025

Bresser T-16 Bruksanvisning

27 Mars 2025

ETON MA 1 Bruksanvisning

19 Mars 2025

KanexPro SP-1X16SL18G Bruksanvisning

14 Mars 2025

Elipson P1 Bruksanvisning

14 Mars 2025

Elipson Stream S300 Xi Bruksanvisning

14 Mars 2025

Elipson WIIM Mini Bruksanvisning

14 Mars 2025

Rexing RoadMate CPStream Bruksanvisning

13 Mars 2025