Danfoss ECtemp Touch Bruksanvisning

Danfoss Termostat ECtemp Touch

Les nedenfor 📖 manual på norsk for Danfoss ECtemp Touch (24 sider) i kategorien Termostat. Denne guiden var nyttig for 7 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/24
Danfoss ECtemp Touch
Electronic Intelligent Timer
Thermostat
Installation Guide
electricheating.danfoss.com
Danfoss ECtemp Touch
Installation Guide2
1 Introduction
The Danfoss ECtemp Touch is an electronic programmable
timer thermostat used for controlling electrical oor heat-
ing elements. The thermostat is designed for xed instal-
lation only and can be used for both direct heating of the
entire room and for comfort heating of the oor. Among
others, the thermostat has the following features:
A touchscreen display with backlight.
An easy-to-follow menu-driven programming and
operation.
1 Introduction � � � � � � � � � � � � � � � � � � 2
1.1 Technical Specications . . . . . . . . . . . 3
1.2 Safety Instructions . . . . . . . . . . . . . . . 5
2 Mounting Instructions � � � � � � � � � � � � � � 6
3 Settings � � � � � � � � � � � � � � � � � � � � � � 9
3.1 Initial Settings. . . . . . . . . . . . . . . . . . 9
3.2 Forecast . . . . . . . . . . . . . . . . . . . . 13
3.3 Window Open . . . . . . . . . . . . . . . . 15
3.4 Maximum Floor Temperature . . . . . . . 16
4 Symbols� � � � � � � � � � � � � � � � � � � � 18
5 Warranty� � � � � � � � � � � � � � � � � � � � � � 19
6 Disposal Instruction � � � � � � � � � � � � � 19
Table of Contents
Danfoss ECtemp Touch
3Installation Guide
An installation wizard with room/oor type-specic
setup.
Support for multiple frame systems.
Compatible with several 3rd party NTC sensors.
Thermostat settings can be specied before instal-
lation and imported to the thermostat using a
web-generated code, or copied from a thermostat in a
similar installation.
Smart access to thermostat settings after installa-
tion by using a web code interface for easy setup or
remote troubleshooting.
More information on this product can also be found at:
electricheating�danfoss�com
1�1 Technical Specications
Operation voltage 220-240 V~, 50/60 Hz
Standby power consumption Max. 0.40 W
Relay:
Resistive load
Inductive load
Max. 16 A / 3680 W @ 230 V
cos φ= 0.3 Max. 1 A
Sensing units NTC 6.8 kΩ at 25°C
NTC 10 kΩ at 25°C
NTC 12 kΩ at 25°C
NTC 15 kΩ at 25°C (Default)
NTC 33 kΩ at 25°C
NTC 47 kΩ at 25°C

Produkspesifikasjoner

Merke: Danfoss
Kategori: Termostat
Modell: ECtemp Touch

Trenger du hjelp?

Hvis du trenger hjelp med Danfoss ECtemp Touch still et spørsmål nedenfor, og andre brukere vil svare deg




Termostat Danfoss Manualer

Termostat Manualer

Nyeste Termostat Manualer