Elipson Prestige Facet SUB12 Bruksanvisning

Elipson Høyttaler Prestige Facet SUB12

Les nedenfor 📖 manual på norsk for Elipson Prestige Facet SUB12 (9 sider) i kategorien Høyttaler. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/9
www.elipson.com
P F SUB12restige acet
COMPLÉMENT DE NOTICE : BRANCHEMENT ET PLACEMENT
ADDITI O N A L I N S T R U C T I O N : CO N N E CTIN G A N D P L A C I N G
C A I S S O N D E B A S S E A C T I F
A C T I V E S U B W O O F E R
2
Cher client,
Merci d’avoir choisi le caisson actif Elipson Prestige Facet SUB12.
Prenez le temps de lire attentivement ce complément d’instruction avant d’installer votre appareil.
Il contient toutes les instructions d’utilisation à suivre pour optimiser les performances de votre caisson actif.
Nous vous recommandons vivement de conserver les deux emballages et le manuel de l’utilisateur pour
une utilisation future.
Dear Customer,
Thank you for choosing the Elipson Prestige Facet active subwoofer SUB12.
Take time to read this additional manual carefully before installing your device.
It contains all the operating instructions that should be followed to optimize the performances of your active
subwoofer. We highly recommend you to retain both packaging and user’s manual for future use.
ATTENTION
WARNING
ASSUREZ-VOUS DE LIRE CE MANUEL D’INSTRUCTIONS
AVANT DE METTRE SOUS TENSION OU DE BRANCHER
CE CAISSON DE BASSE ACTIF.
MAKE SURE TO READ THIS INSTRUCTION MANUAL
BEFORE TURNING THE POWER ON OR HOOKING UP
THIS ACTIVE SUBWOOFER.
4
1a. CONFIGURATION BASS-REFLEX
Commencez par positionner les cylindres en aluminium dans les creux prévus à cet
effet. Posez le socle sur les cylindres et xez-le à l’aide des vis fournies.
BASS-REFLEX CONFIGURATION
Start by positioning the aluminium cylinders in the recesses provided for this
purpose. Place the base on the cylinders and secure with the provided screws.
1a
1b. CONFIGURATION QUASI – CLOS
Insérer le cylindre en mousse fourni sur toute sa longueur dans l’évent, de manière
à pouvoir le retirer aisément si besoin. Positionner les cylindres en aluminium dans
les creux prévus à cet effet. Posez le socle sur les cylindres et xez-le à l’aide des
vis fournies.
QUASI-SEALED LOAD CONFIGURATION
Insert the full length of the foam cylinder supplied into the vent so that it can be
easily removed if required. Let position the aluminum cylinders in the recesses
provided for this purpose. Place the base on the cylinders and secure with the
provided screws.
1b

Produkspesifikasjoner

Merke: Elipson
Kategori: Høyttaler
Modell: Prestige Facet SUB12

Trenger du hjelp?

Hvis du trenger hjelp med Elipson Prestige Facet SUB12 still et spørsmål nedenfor, og andre brukere vil svare deg




Høyttaler Elipson Manualer

Høyttaler Manualer

Nyeste Høyttaler Manualer