Epson ELPMB84 Bruksanvisning

Epson Beamer ELPMB84

Les nedenfor 📖 manual på norsk for Epson ELPMB84 (14 sider) i kategorien Beamer. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/14
User's Guide
ELPMB 84
Projector Stacking Frame Beta
V12H006AW0
e mail: info@euromet.com
EM 2 2500
Safety Precautions
DANGER
; Failure to comply with these safety precautions results in death or serious injury
ELECTRICAL SHOCK HAZARD! Always turn off, disconnect, and disengage all power
sources to the projector before servicing;
WARNING
Failure to comply with these safety precautions may result in serious injury.
At least two qualified people should perform the installation procedure. Personal injury
and/or property damage can result from dropping or mishandling the projector;
If mounting to ceiling studs, make sure that the mounting screws are anchored into the
center of the ceiling studs. Use of an edge edge stud finder is recommended- -to ;
Be aware of the mounting environment. If drilling and/or cutting into the mounting
surface, always make sure that there are no electrical wires in the wall;
Do not install near sources of high heat. Do not install on a structure that is prone to
vibration, movement or chance of impact.
INSTALLATION SAFETY
KITE can only be used by skilled staff who also have the authorization to TRANSPORT,
INSTALL and ADJUST the projector in complete safety based on the necessary
knowledge and competence.
In order to avoid injuries, it is necessary to comply with the following safety rules:
ELPMB84 Use with a projector only in environments which are not exposed to
weather events.
Make sure the projector is compatible with the cage on which it is fitted, as using
incompatible projectors could cause serious damages and injuries.
ELPMB84 Do not place on: unstable surfaces, walls or unsuitable structures.
For STACKING, make sure all safety PINS are fastened with their safety locks, then
make sure all nuts are tightened correctly onto the threaded PINS.
ELPMB84 Do not mount or the projector when people are standing underneath the
installation area.
ELPMB84 Always fasten to the TRUSS with a steel safety cord using the specific
eyelets: in case of fault or failure, the cord must ensure the cage not to be falling
down lower than 5 cm.
Please read the local rules and regulations to comply with any possible additional
safety rules for hanging loads.
ELPMB84Before mounting the projectors on , carefully read the user's manual for
both products.
If the projector is equipped with an additional lens, make sure it is removed during
the installation process.
ELPMB84. At least 2 people are required to install
To avoid any risks during assembly and disassembly process:
- Wear gloves, helmet and suitable safety shoes,
- Make sure the underlying area is cleared and free.
o Carefully follow the instructions described in the
manual for STACKING ELPMB84.
o ELPMB84 Do not stack more than 3 on the floor and
no more than 2 hanging.
The supporting structures and their components must be certified to support the cage and
projector weight.
TOOLS AND SPARE PARTS INCLUDED
; M6 35mm x4 kit
M6 30mm p3-x4 kit;

Produkspesifikasjoner

Merke: Epson
Kategori: Beamer
Modell: ELPMB84

Trenger du hjelp?

Hvis du trenger hjelp med Epson ELPMB84 still et spørsmål nedenfor, og andre brukere vil svare deg