Extron AAP 301 Bruksanvisning

Les nedenfor 📖 manual på norsk for Extron AAP 301 (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/1
AAP 301 and AAP 302 Installation Instructions
The Extron AAP 301 and AAP 302 are 1U and 2U high metal panels that support the
installation of AAP (Architectural Adapter Plate) panels into an equipment rack. The
AAP 301 has four AAP openings that can be populated with up to eight single space or
four double space AAPs. The AAP 302 has four AAP openings that can be populated with
up to 16 single space or 8 double space AAPs.
1. Cable the rear of the AAPs to be installed before attaching the AAPs to the panel. If
applicable, refer to the cabling information in the documentation for the AAP.
2. Insert the adapter plate screws through the holes in the faceplate. Attach the adapter
plates to the faceplate with the provided #4-40 nuts with captive washers. Fill unused
openings with the provided blank AAPs.
3. Secure the panel to the rack using the supplied machine screws. See the figure on the
reverse side of this card.
68-637-01 Rev. B
08 08
AA P 302
AA
P 30
1
#4-40 Nut w/ Captive
Washer
Double Space
Architectural Adapter
Plate
Blank Plates
AAP 302
AAP 301
#10-32 Screw
w/ Nylon Captive
Cap Washer
AAP 301 and AAP 302 Installation Instructions (Cont’d)

Produkspesifikasjoner

Merke: Extron
Kategori: Ikke kategorisert
Modell: AAP 301

Trenger du hjelp?

Hvis du trenger hjelp med Extron AAP 301 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Extron Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer