Extron HC 402 Bruksanvisning

Extron Ikke kategorisert HC 402

Les nedenfor 📖 manual på norsk for Extron HC 402 (16 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/16
1
IMPORTANT:
Go to www.extron.com for the complete
user guide,
installation instructions,
and
specifications bef
ore connecting the
pr
oduct to the po
wer source.
HC 402 • Setup Guide
HC402 System
The Extron HC402 system is an AV presentation solution that incorporates a built-in control processor for display control via
HDMI Consumer Electronics Control (CEC), RS-232, IR, or Ethernet. It also includes digital I/O ports.
Each system is a transmitter-receiver pair that is factory-optimized to work together as if it were a single unit.
Together each transmitter-receiver system extends video, audio, and control signals up to 230feet (70m) over a single CAT cable. x
Each system offers two auto-input switching modes, one of which (the “last connected” mode) automatically selects sources
based on input signals and also allows manual source selection via buttons. Auto-switching modes can be enabled or disabled
via Extron Product Configuration Software (PCS). The “last connected” auto-switching mode is enabled by default.
The HC402 features two AV inputs and one output. It consists of a one-input transmitter (HCT101D) and a scaling receiver
(HCR102) that has one HDMI input and one connection from the transmitter. The transmitter has a decorator-style wallplate and
can be mounted into a standard US 1-gang junction box. The receiver is wall, furniture, or rack mountable.
HCT101D HCR102
Transmitter
The HCT101D transmitter includes one digital (HDMI) video input and
one analog audio input. It does not include input selection buttons and
LEDs. The extended HDMI video signal can be HDCP-compliant.
Receiver
The HCR102 receiver incorporates a high performance, HDCP compliant
scaler that scales video to provide a consistent output resolution to a
display. It accepts video with resolutions from 480i up to 1920x1200, 1080p, and 2K, and performs upscaling and downscaling
with multiple output rates up to 1920x1200, including HDTV 1080p/60 and 2K. The receiver includes an on-screen display, test
patterns, and EDID Minder.
This setup guide provides instructions for an experienced installer to install the HCT101D and the HCR102. The guide provides
information needed to configure the most essential settings for the system and the receiver. It also describes basic operations using
front panel controls and the on-screen display (OSD) menu system. Full details are available in the HC400 Series User Guide.
POWER
12V
2.0A MAX
INPUTS OUTPUTS
1
TP
HDMI
L R
AUDIO
HDMI/CEC
SIG
LINK
IN
COM IR DIGITAL I/O
1 2S GTx Rx G G 3 4 G
HCR 102
LAN
e
HDMI IN
AUDIO IN
Ethernet
PC with
GlobalViewer
Enterprise
TCP/IP
Net work
HCR 102
Scaling Receiver
Display
HDMI,
CEC
Twisted Pair
Cable (AV)
230'
HDMI
MODEL 80
FLAT PANEL
HCT 101 D
Transmitter
Top
Front
Extron
OCS 100W
Wall Mount
Occupancy
Sensor
Ethernet
Room
Wireless Access
Point
Tablet
RESET
A/PoE B
POWER
12V
1.7A MAX
HDMI HDM I Tx Rx G
RS-232
COM
LAUDIO R
OUTP UT
1
C T
2
C T
3
C T
4
C T G +V
CONT ACT / TALLY LANINPUT OUTP UT
Extron
ShareLink Pro 1000
Wireless and Wired
Collaboration
Gateway
HDMI
Ethernet
TCP/IP
Net work
Audio
Figure 1. An HC 402 System Application
2
HC 402 • Setup Guide (Continued)
Panels and Features
Front Panel Features
CONFIG
HCR 102
1
INPUT
LPCM-2CH
MULTI-CH
HDCP
SIGNAL
R
MENU
ENTER
HOLD FOR 720p/1080p
1
AUDIO
HC
R 210
AI J B
C
D HFGE
Figure 2. HCR102 Front Panel (Above),
HCT101D Front Panel Without Wallplate (Right)
A (Config) connector (USB mini-B), page 11
Configuration
B , page 13
Input selection button and LED
C , page 13
Input signal presence (Signal) LED
D , page 13
HDCP status LED
E (LPCM-2Ch and Multi-Ch, page 14)
Audio input type LEDs
F button,
G button, and
H Navigation ( , , , and arrow) buttons (see
To configure the AV settings using the OSD and front panel buttons: on
page7)
I Power LED (HCT101D), power and reset indicator LED (HCR102) —
This green LED indicates either the power status of the HCT101D transmitter or
the HCR102 receiver, or the reset mode of the receiver. For LED indications, see
the table below.
J (HCR102) — Pressing this recessed button causes various product
Reset button
settings to be reset to the factory defaults (see on Reset Modes: a Brief Summary
page15).
Reset and power LED (I) indications are as follows:
NOTE: For other
connectors on the
HCT101D, see Rear
and Side Panel
Features on page3.
e
HDMI IN
AUDIO IN
HCT 101 D Front
(Without Wallplate)
I
Input
2
3
HCT 101 D Transmitter HCR 102 Receiver
• Off — The unit is not powered on.
• On, lit amber — The unit is powered on
but there is no active signal at that input.
• On, lit green — The unit is powered on
and there is an active signal at that input.
• Off — The unit is not powered on.
• On, lit steadily — The unit is powered on.
• Blinking — The unit is powering up or the HCR102 is performing a reset.
The blink pattern depends on the selected reset mode.
For full descriptions of reset modes, how to use the reset button to activate
them, and details of LED indications of each mode, see the HC400 Series
User Guide.
Rear and Side Panel Features
POWER
12V
2.0A MAX
INPUTS OUTPUTS
1
TP
HDMI
L R
AUDIO
HDMI/CEC
SIG
LINK
IN
COM IR DIGITAL I/O
1 2S GTx Rx G G 3 4 G
HCR 102
LAN
MAC: 00-05-A6-XX-XX-XX
S/N: ####### E######
00-05-A6-XX-XX-XX
A F ND G H K L M
HCR 2 10 Rear
O
Figure 3. HCR102 Rear Panel
A connectors, page 12
Power input
B connector, page 9
Audio input
D connectors, page 10
HDMI input
E Transmitter output RJ-45
connector (twisted pair
interconnection),
page 10
F RJ-45 connector
Receiver input
(twisted pair interconnection),
page 10
G connector,
HDMI/CEC output
page 10
H connector,
Analog audio output
page 10
K control port,
COM RS-232
page 11
L control port, page 11
IR output
M (digital input/output)
Digital I/O
control ports, page 11
N connector and
LAN (Ethernet)
LEDs, page 11
O (on side of receiver),
MAC address
page 11
NOTE: Features C, I, and J are
available on other HC400 Series
transmitter models.
HCT 101 D
POWER
12V
A MAX0.7
OUT
e
HDMI
IN
A
UDI
IN
B
D
HCT 1 D F t10 ron
HCT 1 D10
Rear
HCT 1 D 10
Right Side
HCT 1 D p10 To
Wallplate
A
E
E
Figure 4. HCT101D Right Side Panel (Top Left), Rear Panel (Top Right),
Top Panel (Bottom Left), Front Panel (Bottom Right)

Produkspesifikasjoner

Merke: Extron
Kategori: Ikke kategorisert
Modell: HC 402

Trenger du hjelp?

Hvis du trenger hjelp med Extron HC 402 still et spørsmål nedenfor, og andre brukere vil svare deg


Ikke kategorisert Extron Manualer

Extron

Extron ZipClip 100 Bruksanvisning

4 Januar 2025
Extron

Extron HC 402 Bruksanvisning

4 Januar 2025
Extron

Extron ShareLink Pro 2500 Bruksanvisning

4 Januar 2025
Extron

Extron FOX3 SR 301 Bruksanvisning

4 Januar 2025
Extron

Extron TMK 110 D Bruksanvisning

4 Januar 2025
Extron

Extron SMB 210 Bruksanvisning

4 Januar 2025
Extron

Extron FOX3 T 201 Bruksanvisning

4 Januar 2025
Extron

Extron VoiceLift Pro VLC 302 Bruksanvisning

11 Desember 2024
Extron

Extron DTP2 T 212 Bruksanvisning

11 Desember 2024
Extron

Extron AAP 100 Bruksanvisning

11 Desember 2024

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Chauvet

Chauvet Hurricane Bubble Haze LT Bruksanvisning

7 Januar 2025
Drawmer

Drawmer 1968 MkII Bruksanvisning

7 Januar 2025
Chauvet

Chauvet Hurricane Bubble Haze X2 Q6 Bruksanvisning

7 Januar 2025
Daewoo

Daewoo Hurricane Cat 5 Deluxe Pro Bruksanvisning

7 Januar 2025
Indesit

Indesit IPG 751 S (GR) EV Bruksanvisning

7 Januar 2025
Hortus

Hortus 505-195 Bruksanvisning

7 Januar 2025
Bosch

Bosch GBS 750 Professional Bruksanvisning

7 Januar 2025
Hortus

Hortus 116-101 Bruksanvisning

7 Januar 2025
Hortus

Hortus 505-199 Bruksanvisning

7 Januar 2025
Crestron

Crestron RFID-USB Bruksanvisning

7 Januar 2025