Havis DS-DA-409 Bruksanvisning
Les nedenfor 📖 manual på norsk for Havis DS-DA-409 (2 sider) i kategorien Bilsett. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2
A
*END RESULT*
FOR ALTERNATIVE PLIER METHOD,
USE THESE 2 LOCATIONS FOR
CLAMPING TOGETHER.
CF29X, 30 PLASTIC CLIP
("L" STANDS FOR LAPTOP)
STEP 1. SELECTING YOUR CLIP
DETAIL A
SCALE 2 : 1
FEATURES THAT SNAP
INTO WINDOWS OF
UPPER BRACKET
STEP 2. INSERTING YOUR CLIP
(FOR USE WITH NIGHT EYES LIGHT,
REFER TO USB-POWERED NIGHT EYE
INSTALLATION INSTRUCTIONS)
USE THESE 2 HOLES
TO MOUNT LOWER BRACKET
STEP 3. ATTACHING SS.X TO DOCK
DS.CF29X/30 SIDE MEMBER
3B
CF18X, 19 PLASTIC CLIP
("T" STANDS FOR TABLET)
USE TO MOUNT LOWER
BRACKET
DS.CF18X/19 SIDE MEMBER
3A
DS.CF29X/30 OR CF18X/19
PLASTIC CLIP
TIGHTENING KNOB
LOWER BRACKET
#4 X 1" PLASTITE SCREW
TORQUE TO 8 IN-LBS
10%
(CF29X/30 ONLY)
#8 X 1-1/4"
SHEET METAL SCREW
TORQUE TO 8 IN-LBS
10%
(CF29X/30 ONLY)
STEEL BRACKET
8-32 X 1-3/4" FLAT HEAD
CAP SCREW (CF18X/19)
TORQUE TO 20 IN-LBS
10%
(SHEET 1/2)
HOLES USED FOR STYLUS
(STYLUS NOT INCLUDED)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
SCREEN STIFFENER
ASSEMBLY
04-20-07
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
877-88-LEDCO
www.ledco.net
SS-0018-IS-C
PRODUCT DESCRIPTION
TO BE USED IN CONJUNCTION WITH
PANASONIC DS.CF18X, 19, 29X, 30 TOUGHBOOKS.
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
REV. DATE
DRAWING NUMBER:
SS.X
(DS.CF18X/19/29X/30)
HARDWARE KIT CONTENTS:
INSTALLATION INSTRUCTIONS:
SS.X MUST BE ATTACHED TO THE LEFT-HAND (DRIVER'S) SIDE OF THE
DOCKING STATION:
STEP 1 - SELECTING YOUR CLIP
- IF YOU WILL BE USING THE SS.X WITH A CF-18 OR CF-19 TABLET
COMPUTER, USE THE CLIP MARKED "T" FOR TABLET.
- IF YOU WILL BE USING THE SS.X WITH A CF-28, CF-29, OR CF-30 LAPTOP
COMPUTER, USE THE CLIP MARKED "L" FOR LAPTOP.
STEP 2. - INSERTING YOUR CLIP
AFTER SELECTING YOUR CLIP, INSERT THE CLIP BY HAND INTO THE
STEEL BRACKET AS SHOWN; CLIP WILL SNAP INTO WINDOWS OF THE
STEEL BRACKET. *BE CAREFUL NOT TO OVERBEND EITHER PIECE. THIS
COULD CAUSE BREAKAGE.* IF NECESSARY, USE A PAIR OF PLIERS WITH
SOFT, PROTECTED JAWS AND APPLY PRESSURE IN THE LOCATIONS
NOTED IN THE DIAGRAM TO ASSIST IN THE INSERTION.
STEP 3. - ATTACHING SS.X TO DOCK
REFER TO THE DIAGRAMS IN 3A AND 3B TO AID IN THIS PROCESS.
CF-18 AND CF-19 WITH "T" CLIP
REMOVE THE FLAT HEAD CAP SCREW FROM DOCK IN THE LOCATION
SHOWN IN 3A. ALIGN HOLE OF LOWER BRACKET OF SS.X WITH HOLE IN
SIDEMEMBER OF DOCK AND BEGIN THREADING THE 8-32 X 1-3/4" FHCS.
ALIGN RIDGES OF SIDEMEMBER WITH RIDGES OF LOWER BRACKET AND
TIGHTEN THE 8-32 X 1-3/4" FHCS TO 20 INCH-LBS
10%.
CF-28, CF-29, AND CF-30 WITH "L" CLIP
ALIGN COUNTER-SUNK HOLE OF THE LOWER BRACKET WITH THE
COUNTER-SUNK HOLE OF THE DOCK SIDEMEMBER AS SHOWN IN 3B;
INSERT #8 X 1-1/4" SCREW INTO LOWER BRACKET. TIGHTEN THE #8 X 1-
1/4" SCREW TO FASTEN THE LOWER BRACKET TO THE SIDEMEMBER.
NEXT, SCREW THE #4 X 1" PLASTITE SCREW THRU THE SMALL HOLE AT
THE FRONT OF THE LOWER BRACKET AND INTO THE SMALL HOLE IN THE
SIDEMEMBER OF THE DOCK. TIGHTEN BOTH FASTENERS TO 8 INCH-LBS
10%.
WARNING: ALL
LEDCO
PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER, IT
IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING
LEDCO
MOUNTING AND DOCKING
EQUIPMENT, TO INSURE THAT THE EQUIPMENT IN INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE
OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY
DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN
ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND
MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE
OPERATING VEHICLE.
0.38
01-22-08
(SHEET 2/2)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
SCREEN STIFFENER
ASSEMBLY
04-20-07
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
877-88-LEDCO
www.ledco.net
SS-0018-IS-C
PRODUCT DESCRIPTION
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
REV. DATE
DRAWING NUMBER:
SS.X
(DS.CF18X/19/29X/30)
WARNING: ALL
LEDCO
PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER, IT
IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING
LEDCO
MOUNTING AND DOCKING
EQUIPMENT, TO INSURE THAT THE EQUIPMENT IN INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE
OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY
DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN
ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND
MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE
OPERATING VEHICLE.
TO BE USED IN CONJUNCTION WITH
PANASONIC DS.CF18X, 19 , 29X, 30 TOUGHBOOKS.
01-22-08
Produkspesifikasjoner
| Merke: | Havis |
| Kategori: | Bilsett |
| Modell: | DS-DA-409 |
Trenger du hjelp?
Hvis du trenger hjelp med Havis DS-DA-409 still et spørsmål nedenfor, og andre brukere vil svare deg
Bilsett Havis Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
Bilsett Manualer
Nyeste Bilsett Manualer
22 Oktober 2024
20 Oktober 2024
16 Oktober 2024
16 Oktober 2024