Imarflex ICB-450GS Bruksanvisning

Imarflex Blender ICB-450GS

Les nedenfor 📖 manual på norsk for Imarflex ICB-450GS (7 sider) i kategorien Blender. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/7
SPECIFICATION:
MODEL NO. : ICB-450GS
RATED VOLTAGE : 230Va.c. 60Hz
POWER CONSUMPTION : 400 Watts
IMPORTANT SAFEGUARDS:
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions carefully.
2. Before using the unit, check if the voltage indicated corresponds with the convenience
outlet (230Va.c.).
3. Do not use two-way socket with other appliance.
4. Do not use any appliance with a damaged cord or plug. If the cord is damaged it
should be replaced with the same type and size, bring the unit to the nearest Imarex
Authorized Service Center.
5. Do not place the unit near gas stove, electric stove or in a heated oven.
6. Put the unit on stable surface; keep it away from the edge of counter to avoid accident.
7. Children should be supervise to ensure that they do not play with the appliance.
8. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliances by
a person responsible for their safety.
9. To protect against electric shock, do not immerse the base in water.
10. Blade is sharp, handle it carefully.
11. Do not put the blade assembly on the base without the glass jar.
12. Do not use the blender if the glass jar has a crack.
13. Do not use the unit for outdoor use.
14. Do not use this unit other than its intended use.
15. For household use only not intended for any business purposes.
16. Save this instruction manual for future reference
DESCRIPTION OF PARTS
ASSEMBLING THE GLASS JAR:
IMPORTANT: Your blender jar and blades are subject to wear during normal use. Always
inspect the jar for nicks, chips or cracks. Always inspect blades for broken, bent or loose
blades. Avoid using the jar or blades if damaged.
Contact the Imarex Authorized Service Center to obtain evaluation and repair.
Make sure that the blender is unplugged. Place blender base on clean, y surface to dr
keep foreign particles from being pulled up into motor during operation.
1. Put the Blade Assembly (6) into the Jar Support (7).
2. Put the Rubber Packing (5) on the inner edge of the Blade Assembly (6).
3. Attach the Safety Ring (4) into the bottom of the Glass Jar (3).
4. Insert the assembled Jar Support into the bottom of the Glass Jar (3) and turn
clockwise until Glass Jar (3) locks into place.
5. Make sure that the blender is switched OFF.
6. Place the Glass Jar with Blade Assembly on the Motor Base (8) and press down until
securely engaged.
7. Put the Center Lid (1) on the Lid (2).
8. Secure the Lid (2) into the Glass Jar (3) and press down.

Produkspesifikasjoner

Merke: Imarflex
Kategori: Blender
Modell: ICB-450GS

Trenger du hjelp?

Hvis du trenger hjelp med Imarflex ICB-450GS still et spørsmål nedenfor, og andre brukere vil svare deg