Imarflex ICB-500B Bruksanvisning

Imarflex Blender ICB-500B

Les nedenfor 📖 manual på norsk for Imarflex ICB-500B (5 sider) i kategorien Blender. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/5
SPECIFICATION
MODEL NO. : ICB- B 500
RATED VOLTAGE : 230Va.c. ~ 60Hz
POWER CONSUMPTION : 500 Watts
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions carefully.
2. Before using the unit, check if the voltage indicated corresponds with the
convenience outlet (230Va.c.).
3. Do not use two-way socket with other appliance.
4. Do not use any appliance with a damaged cord or plug. If the cord is damaged it
should be replaced with the same type and size or bring the unit to the nearest
Imarex Authorized Service Center.
5. Do not place the unit near gas stove, electric stove or in a heated oven.
6. Put the unit on at stable surface, keep it away from the edge of counter to avoid
accident.
7. Children should be supervised to ensure that they do not play with the appliance.
8. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliances by a person responsible for their safety.
9. To protect against electric shock, do not immerse the base in water.
10. Blade is sharp, handle it carefully.
11. Do not put the blade assembly on the base without the glass jar.
12. Do not use the blender if the glass jar has a crack.
13. Do not use the unit for outdoor use.
14. Do not use this unit other than its intended use.
15. For household use only.
16. Save this instruction manual for future reference.
DESCRIPTION OF PARTS
1. Center Lid
2. L id
3. Glass Jar
4. Safety Ring
5 Rubber Packing .
6 Blade Assembly .
7 Jar Support .
8 Motor Base .
9 Selector Switch .
10 Grinder Cover .
11 Grinder Base .
12 Filter .
ASSEMBLING THE GLASS JAR:
1. Put the Blade Assembly (6) into the Jar Support (7).
2. Put the Rubber Packing (5) on the inner edge of the Blade Assembly (6).
3. Attach the Safety Ring (4) into the bottom of the Glass Jar (3).
4. Insert the assembled Jar Support into the bottom of the Glass Jar (3) and turn
clockwise until Glass Jar (3) locks into place.
5. Make sure that the blender is switched OFF.
6. Place the Glass Jar with Blade Assembly on the Motor Base (8) and press down
until securely engaged.
7. Put the Center Lid (1) on the Lid (2).
8. Secure the Lid (2) into the Glass Jar (3) and press down.

Produkspesifikasjoner

Merke: Imarflex
Kategori: Blender
Modell: ICB-500B

Trenger du hjelp?

Hvis du trenger hjelp med Imarflex ICB-500B still et spørsmål nedenfor, og andre brukere vil svare deg