JBL SCS500.5 Bruksanvisning

JBL Høyttaler SCS500.5

Les nedenfor 📖 manual på norsk for JBL SCS500.5 (6 sider) i kategorien Høyttaler. Denne guiden var nyttig for 7 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/6

SCS500.5 SYSTEM

Frequency Response

30Hz – 20kHz (–6dB)

SATELLITES

Maximum Recommended Amplifier Power

100 Watts

Nominal Impedance 8 Ohms

Sensitivity 88dB @ 1 Watt/1 meter

Frequency Response 100Hz – 20kHz (–6dB)

Tweeter

1/2" (13mm) Titanium-laminate dome,

video-shielded

Midrange

Dual 3" (75mm) drivers, video-shielded

Dimensions (H x W x D)

(not including shelf stand)

11-1/2" x 4" x 3-1/2" (292mm x 102mm x 89mm)

Weight 3 lb (1.4kg)

CENTER

Maximum Recommended Amplifier Power

100 Watts

Nominal Impedance 8 Ohms

Sensitivity 88dB @ 1 Watt/1 meter

Frequency Response 100Hz – 20kHz (–6dB)

Tweeter

1/2" (13mm) Titanium-laminate dome,

video-shielded

Midrange

Dual 3" (75mm) drivers, video-shielded

Dimensions (H x W x D)

(not including shelf stand)

4" x 11-1/2" x 3-1/2" (102mm x 292mm x 89mm)

Weight 3 lb (1.4kg)

SUBWOOFER

Amplifier 150 Watts RMS

Frequency Response 30Hz – 120Hz (–6dB)

Woofer 10" (250mm)

Enclosure Bass-reflex

Dimensions (H x W x D)

(including feet)

20" x 13-3/4" x 15-3/4"

(508mm x 349mm x 400mm)

Weight 35 lb (15.9kg)

SPECIFICATIONS

All features and specifications are subject to change

without notice.

Dolby and Pro Logic are registered trademarks of

Dolby Laboratories.

DTS is a registered trademark of DTS, Inc.

DE SI GN G O AL : Bring the thrill of live performance and movie sound

the home environment bycalling on JBL’s professional engineering leadership.

S AT EL L I T E T YPE :

Titanium-laminate-dome tweeter,

sealed enclosure

S UB W O OF E R T YP E :

Bass-reflex enclosure

PORT DESIGN: FreeFlow™flared

PR O F E S S I O NA L R E F E R E NC E : Cinema Loudspeaker Series

OWNER’S GUIDE

P R O D U C T L I N E :

M O DE L :

SCS500.5

S UR RO UN D C INE MA

S P E A K E RS

JBL is a trademark of Harman International Industries,

Incorporated, registered in the United States and/or

other countries.

Part No.

406-000-05677-E

PRO SOUND

COMES HOME™

Harman Consumer Group, Inc.

250 Crossways Park Drive, Woodbury, NY 11797

8500 Balboa Boulevard, Northridge, CA 91329

516.255.4JBL (4525) (USA only)

www.jbl.com

SCS500.5

INCLUDED

THANK YOU FOR CHOOSING JBL

For more than 60 years, JBL

has been involved in every

aspect of music and film

recording and reproduction,

from live performances to

the recordings you play in

your home, car or office.

We’re confident that the JBL

system you have chosen will

provide every note of enjoy-

ment that you expected –

and that when you think

about purchasing additional

audio equipment for your

home, car or office, you will

once again choose JBL.

Please take a moment to

Web site at www.jbl.com.

It enables us to keep you

posted on our latest advance-

ments, and helps us to better

understand our customers

and build products that

meet their needs and

expectations.

JBL, Incorporated

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves or other

apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding-type plug has two blades

and a third grounding prong. The wide blade

or the third prong is provided for your safety.

If the provided plug does not fit into your out-

let, consult an electrician for replacement of

the obsolete outlet.

10. Protect the power cord from being

walked on or pinched, particularly at plugs,

convenience receptacles and the point

where they exit from the apparatus.

11. Only use attachments/accessories speci-

fied by the manufacturer.

12. Use only with the cart, stand, tripod,

bracket or table specified by the manufac-

turer or sold with the apparatus. When a cart

is used, use caution when moving

the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus dur-

ing lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power supply cord or plug is dam-

aged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. Do not expose this apparatus to dripping

or splashing and ensure that no objects filled

with liquids, such as vases, are placed on

the apparatus.

16. To completely disconnect this apparatus

from the AC Mains, disconnect the power

supply cord plug from the AC receptacle.

17. The mains plug of the power supply cord

shall remain readily operable.

18. Do not expose batteries to excessive heat

such as sunshine, fire or the like.

The lightning flash with

arrowhead symbol, within an

equilateral triangle, is

intended to alert the user to

the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magni-

tude to constitute a risk of electric shock to

persons.

The exclamation point within

an equilateral triangle is

intended to alert the user to

the presence of important

operating and maintenance

(servicing) instructions in the literature

accompanying the product.

WARNING: To reduce the risk of fire or elec-

tric shock, do not expose this apparatus to

rain or moisture.

Four satellites for left, right and

surrounds. Wall-mount brackets.

Shelf stands. Floor stand adapters.

One center channel speaker with shelf

stand and wall-mount bracket.

Powered subwoofer.

Three 20' (6m) speaker cables for connection

to front, left, center and right speakers.

Two 40' (12m) speaker cables for connection

from receiver to rear satellites.

One 15' (4.6m) RCA interconnect cable for

connection from receiver to subwoofer’s

LFE input.

In addition, there are two hardware bags

included. Hardware Bag A contains screws

for the shelf stands. Hardware Bag B con-

tains screws for the floor stand adapters and

parts for the wall-mount brackets, including

the metal tightening bar.

SPEAKER PLACEMENT

SUBWOOFER

SURROUND SPEAKERS

5–6 ft

(1.5–1.8m)

FRONT

SPEAKERS

0–2 ft

(0–0.6m)

The front speakers should be

placed the same distance

from each other as they are

from the listening position.

They should be placed at

about the same height from

the floor as the listeners’

ears will be, or they may be

angled toward the listeners.

The center channel speaker

should be placed directly

above or below the televi-

sion, and no more than two

feet above or below the

tweeters of the left and right

speakers. It is often con-

venient to set the center

speaker on top of the tele-

vision set, as shown in the

drawing.

The surround speakers

should be placed slightly

behind the listening position

and, ideally, should face

each other and be at a

level

higher than the listeners’

ears.

If that is not possible, they

may be placed on a wall

behind the listening position,

facing forward. Additional

satellites may be purchased

separately for use in 6.1- or

7.1-channel systems.

Generally, it is best to aim

all of the speakers (except

the subwoofer) toward the

listening position at about

ear-level height.

The low-frequency material

reproduced by the subwoofer

is mostly omnidirectional,

and this speaker may be

placed in a convenient loca-

tion in the room. However,

bass reproduction will be

maximized when the sub-

woofer is placed in a corner

along the same wall as the

front speakers. Experiment

with subwoofer placement

by temporarily placing the

subwoofer in the listening

position and moving around

the room until the bass

reproduction is best. Place the

subwoofer in that location.

CENTER CHANNEL

SPEAKER

MOUNTING OPTIONS

On shelves. On the wall. Wall

brackets are included.

On optional stands.

SATELLITES AND SURROUNDS

Prepare the speaker wire as

described on page 7. Thread

the two conductors through

the two holes in the stand

bracket. Make sure to pre-

serve the proper polarity

(+ and – connections) by

threading the positive con-

ductor through the hole on

the left, and the negative

conductor through the hole

on the right, looking at the

front of the stand. Push down

on the red speaker terminal

and insert the bare end of the

positive wire into the hole

under the red cap. Release

the cap, and tug gently on the

wire to make sure that the

connection is snug. Follow

the same procedure to con-

nect the negative wire to its

terminal.

Gently pull the slack out of

the wire and screw the shelf

stand onto the back of the

speaker in two places, as

shown. The shelf stand

screws may be found in

Hardware Bag A. Use the

larger screw in the upper

screw hole, and the smaller

screw in the lower screw hole.

ATTACHING THE SHELF STAND TO THE SPEAKER

MOUNTING THE SATELLITES ON OPTIONAL FLOOR STANDS

Important Safety Note: The

supplied floor stand adapters

facilitate installation with a

variety of general-purpose

floor stands available from

many manufacturers. Since

different stands will have

different weight capacities

and stability characteristics, it

is the customer’s responsibility

to check with the stand

manufacturer or dealer to

determine whether that spe-

cific stand is capable of han-

dling the weight and propor-

tions of these loudspeakers in

a safe and stable manner. JBL

disclaims any liability for the

selection of suitable floor

stands and/or correct compat-

ibility between the selected

stand and these satellite loud-

speakers.

The floor stand adapters are

compatible with floor stands

equipped with a 1/4"-20

threaded insert.

Prepare the speaker wire as

described on page 7. Thread

the two conductors through

the two holes in the floor stand

adapter. Make sure to

preserve the proper polarity

(+ and – connections) by

threading the positive

conductor through the hole

on the left, and the negative

conductor through the hole on

the right, looking at the front of

the adapter. Push down on the

red speaker terminal and

insert the bare end of the

positive wire into the hole

under the red cap. Release

the cap, and tug gently on

the wire to make sure that

the connection is snug.

Follow the same procedure

to connect the negative wire

to its terminal.

–

Produkspesifikasjoner

Merke:	JBL
Kategori:	Høyttaler
Modell:	SCS500.5

Trenger du hjelp?

Hvis du trenger hjelp med JBL SCS500.5 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Høyttaler JBL Manualer

JBL PRX925 Bruksanvisning

26 Februar 2025

JBL 600GTi Bruksanvisning

21 Februar 2025

JBL 500GTi Bruksanvisning

21 Februar 2025

JBL Cinema Sound CS6100 Bruksanvisning

12 Februar 2025

JBL PartyBox Stage 320 Bruksanvisning

14 Januar 2025

JBL CVL28 Bruksanvisning

9 Januar 2025

JBL Tower X Marine MT10HLW Bruksanvisning

6 Januar 2025

JBL Control CM42AW Bruksanvisning

1 Januar 2025

JBL Performance P36AW Bruksanvisning

1 Januar 2025

JBL Balboa 30 Bruksanvisning

1 Januar 2025

Høyttaler Manualer

Nyeste Høyttaler Manualer

Metronic 477074 Bruksanvisning

27 Mars 2025

Induction Dynamics C2 Bruksanvisning

25 Mars 2025

ETON HEX 165 Bruksanvisning

20 Mars 2025

ETON PRW 50 Bruksanvisning

20 Mars 2025

ETON PRA 80 Bruksanvisning

20 Mars 2025

ETON PFX 16 Bruksanvisning

20 Mars 2025

SOUNDBOKS The Charger Bruksanvisning

20 Mars 2025

Streetz CM717 Bruksanvisning

20 Mars 2025

Streetz CM715 Bruksanvisning

20 Mars 2025

Streetz CM716 Bruksanvisning

20 Mars 2025