JBL Studio S36II PM Bruksanvisning

JBL Høyttaler Studio S36II PM

Les nedenfor 📖 manual på norsk for JBL Studio S36II PM (4 sider) i kategorien Høyttaler. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/4

S36

STUDIO™SERIES

OWNER’S GUIDE

For more than 50 years, JBL has

been involved in every aspect of

music and film recording and

reproduction, from live perform-

ances to the recordings you play

in your home, car or office.

We’re confident that the JBL loud-

speakers you have chosen will

provide every note of enjoyment that

you expected – and that when you

think about purchasing additional

audio equipment for your home, car

or office, you will once again

choose JBL.

Please take a moment to register

your product at our Web site,

www.jbl.com. It enables us to keep

you posted on our latest advance-

ments, and helps us to better

understand our customers and

build products that meet their

needs and expectations.

JBL Consumer Products

THANK YOU FOR CHOOSING JBL

SPEAKER PLACEMENT

Proper placement of the speakers

is an important step in obtaining the

most realistic soundstage possible.

These recommendations are for the

optimal placement of the loud-

speakers. Use these placement

recommendations as a guide. Slight

variations will not diminish your lis-

tening pleasure.

The Studio™Series S36IIPM loud-

speakers are video-shielded and

can safely be placed near a

television.

The loudspeakers are weather-

resistant and may be used either

indoors or outdoors, such as in a

patio area. As noted below, when

using the speakers outdoors, we

recommend mounting them under

an overhang, such as roof eaves,

for added protection. Because

they are resistant to moisture,

the speakers are also appropriate

for mounting in a bathroom,

although not inside a bathtub or

shower stall.

Although these loudspeakers are

designed as a mirrored pair, the

decision as to which one is left or

right will depend on the amount of

space left between them.

A wider stereo image is presented

with the tweeter/midrange array

outboard, and a tighter image is

presented with the array inboard.

Less than 6 – 8 feet

More than 6 – 8 feet

0-2 ft.

For stereo-only applications:

For home theater applications:

This placement provides a wide

spread in sound, supplemented

by the center channel speaker.

Do not attempt to mount these

speakers on a ceiling, on the

underside of roof eaves or in a

shower stall.

The S36 PM loudspeakers may beII

positioned on the wall either hori-

zontally or vertically. The grille logo

on each speaker may be rotated

depending on how the speaker is

positioned. Gently pull the logo

away from the grille slightly, rotate it

to the desired position, and let go.

The logo will snap back into place.

When mounted vertically, the

tweeter array may be positioned

either up or down, depending on the

height of the placement. If the

speakers will be above ear level,

the tweeter array should be posi-

tioned down, preferably no more

than two feet above ear level. If

the speakers will be mounted very

low, it may be best to position the

tweeter array upward so that it will

be no more than two feet below

ear level.

The enclosures are specially

designed to angle the speakers

toward the listener when mounted

flush against the wall.

When mounting the speakers out-

doors, we recommend that you

place them under an overhang,

such as roof eaves, for added pro-

tection, and that you use two of

the supplied special angle-mount

screws per speaker, which angle

the speakers downward at a

greater-than-usual angle, facilitat-

ing water drainage.

NOTE: When using the enclosed

angle-mount screws, always use

the top two screw locations appro-

priate for the specific mounting

orientation of your S36IIPM.

Referring to the enclosed installa-

tion template, screw locations (1)

and (2) are to be used when

mounting the S36IIPM horizontally

so that these locations are on top.

To mount the loudspeakers verti-

cally, use locations (2) and (4) or

locations (1) and (3), depending on

the mounting orientation. Do not

mount the speaker upside down

(with screw locations (3) and (4) on

top) because it won’t be able to

lock onto the screw heads.

Remember that the JBL logo on

the tweeter/mid faceplate can be

rotated with choice of speaker

position (vertical or horizontal).

At least one screw per speaker

should be installed in a wooden

wall stud. Select an appropriate

wall anchor for the other screw.

If the special angle-mount screws

are not being used, size 10 screws

of at least 1-1/2" in length are rec-

ommended. If the screws are used

in drywall or other surfaces inca-

pable of holding the screw by

itself, selection of proper anchors

is essential. The customer is solely

responsible for proper selection

and installation of screws, anchors

and other installation hardware.

Further installation details are

included on the installation

template.

WALL-MOUNTING

S36

Wall

Supplied Angle-Mount Screw

(When using angle-mount screws,

always utilize the top

two screw holes on the

S36

PM, depending on

mounting orientation.)

Horizontal mounting:

Use screwholes (1) and (2).

Vertical mounting: Use

screwholes (1) and (3), or (2)

and (4), whichever are uppermost.

Supplied Rubber Pad

Roof eave

If there is no sound from any of the

speakers:

• Check that receiver/amplifier is

on and that a source is playing.

• Review proper operation of your

receiver/amplifier.

• Make sure all wires are con-

nected. Make sure none of the

speaker wires are frayed, cut or

punctured, or touching each other.

If the system plays at low volumes

but shuts off as volume is

increased:

• Check all wires and connections

between receiver/amplifier and

speakers.

• Make sure all wires are con-

nected. Make sure none of the

speaker wires are frayed, cut or

punctured, or touching each other.

• If more than one pair of main

speakers is being used, check the

minimum impedance requirements

of your receiver/amplifier.

If there is no sound coming from

one speaker:

• Check the “Balance” control on

your receiver/amplifier.

• Check all wires and connections

between receiver/amplifier and

speakers. Make sure no wires are

touching other wires or terminals

and creating a short circuit.

• Make sure all wires are con-

nected. Make sure none of the

speaker wires are frayed, cut or

punctured.

• In Dolby* Digital or DTS®modes,

make sure that the receiver/

processor is configured so that the

speaker in question is enabled.

• Turn off all electronics and switch

the speaker in question with one of

the other speakers that is working

correctly. Turn everything back on,

and determine whether the prob-

lem has followed the speaker, or

has remained in the same channel.

If the problem is in the same chan-

nel, the source of the problem is

most likely with your receiver or

amplifier, and

you should consult the

owner’s manual for that product for

further information.

If the problem

has followed the speaker, consult

your dealer for further assistance

or, if that is not possible, visit

www.jbl.com for further infor-

mation.

CONNECTION TIPS

SPEAKER CONNECTIONS

Speakers and electronics terminals

have corresponding (+) and (–) ter-

minals. It is important to connect

both speakers identically: (+) on the

speaker to (+) on the amplifier and

(–) on the speaker to (–) on the

amplifier. Wiring “out of phase”

results in thin sound, weak bass

and a poor stereo image. With the

advent of multichannel surround

TROUBLESHOOTING

– +– +

– +

Speaker Outputs

LEFT

RIGHT

– +

Installation of Self-Adhesive

Rubber Pads: If the speaker is to

be placed on a surface (such as

a table top or shelf) rather than

wall-mounted, the enclosed self-

adhesive rubber pads are to be

attached to the bottom of the

speaker cabinet in their desig-

nated recessed locations. If the

speaker is to be wall-mounted,

then the four self-adhesive rubber

pads should be attached to the

back of the speaker, as shown in

the bottom right diagram.

When angle-mounting the

S36IIPM, only two of the rubber

pads are required, and they need

to be installed on the back of the

loudspeaker, near the lower edge,

so that they are located between

the back of the speaker and the

mounting surface. Please see the

enclosed installation template for

more details.

NOTE: The threaded inserts on the

bottom of the speakers are to be

used only with JBL accessories

that have been developed speci-

cally for the S36

PM and that may

become available at a future date.

Do not attempt to install bolts or

any non-JBL brackets or acces-

sories to these threads, as this

might damage the speaker and

dislodge the insert.

PADS GO HERE

sound systems, connecting all of

the speakers in your system with

the correct polarity remains

equally important in order to pre-

serve the proper ambience and

directionality of the program

material.

To use the binding-post speaker

terminals, unscrew the collar until

the pass-through hole in the cen-

ter post is visible under the collar.

Insert the bare end of the wire

through this hole; then screw the

collar down until the connection

is tight.

The hole in the center of each col-

lar is intended for use with banana-

type connectors.

To comply with

KEYHOLES FOR

MOUNTING HARDWARE

PLACE RUBBER PADS HERE

For wall-mounting

For tabletop or shelf placement

European CE certification, these

holes are blocked with plastic

inserts at the point of manufacture.

Use of banana-type connectors

requires the removal of the inserts.

Do not remove these inserts if

you are using the product in an

area covered by European CE

certification.

Produkspesifikasjoner

Merke:	JBL
Kategori:	Høyttaler
Modell:	Studio S36II PM

Trenger du hjelp?

Hvis du trenger hjelp med JBL Studio S36II PM still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Høyttaler JBL Manualer

JBL PRX925 Bruksanvisning

26 Februar 2025

JBL 600GTi Bruksanvisning

21 Februar 2025

JBL 500GTi Bruksanvisning

21 Februar 2025

JBL Cinema Sound CS6100 Bruksanvisning

12 Februar 2025

JBL PartyBox Stage 320 Bruksanvisning

14 Januar 2025

JBL CVL28 Bruksanvisning

9 Januar 2025

JBL Tower X Marine MT10HLW Bruksanvisning

6 Januar 2025

JBL Control CM42AW Bruksanvisning

1 Januar 2025

JBL Performance P36AW Bruksanvisning

1 Januar 2025

JBL Balboa 30 Bruksanvisning

1 Januar 2025

Høyttaler Manualer

Nyeste Høyttaler Manualer

Metronic 477074 Bruksanvisning

27 Mars 2025

Induction Dynamics C2 Bruksanvisning

25 Mars 2025

ETON HEX 165 Bruksanvisning

20 Mars 2025

ETON PRW 50 Bruksanvisning

20 Mars 2025

ETON PRA 80 Bruksanvisning

20 Mars 2025

ETON PFX 16 Bruksanvisning

20 Mars 2025

SOUNDBOKS The Charger Bruksanvisning

20 Mars 2025

Streetz CM717 Bruksanvisning

20 Mars 2025

Streetz CM715 Bruksanvisning

20 Mars 2025

Streetz CM716 Bruksanvisning

20 Mars 2025