Moultrie AG-300 Bruksanvisning

Moultrie Kamera AG-300

Les nedenfor 📖 manual på norsk for Moultrie AG-300 (4 sider) i kategorien Kamera. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/4
THANK YOU for your purchase of an A-Series Digital Game Camera. Please read this booklet before using
the unit. If you have any questions about this product or any other Moultrie product, please contact us
using the information provided on page 7 of this booklet.
Please register your camera at to activate your warranty.
Easy Setup 2 ...............
Important Notes 2 .......
Mounting Camera 3 .....
Setup Mode 4 .............
Time & Date 5 .............
Detection Delay 5 ........
Capture 5 ....................
Camera ID 6 ................
Erasing Images 6 ........
LCD Display
Mode Selector
Slider
Battery Compartment
External
Power Port
Micro USB
Port
SD Card
Slot
Navigation Buttons
PRADCO Outdoor Brands • 3280 Highway 31, Ste. B • Calera, AL 35040
MCG-13483
W-400
MCG-13484
W-800
MCG-13485
W-900i Kit
MCG-14 006
AC-400
MCG-14004
AC-900i Kit
MCG-14 005
AC-800 Bundle
MCG-14 007
BC-900i Kit
MCG-14 008
BC-800 Kit
MCG-14 009
T-900i Kit
MCG-14 010
T-800 Bundle
MCG-14013
BC-400 Bundle
Changes and modifications not expressly approved by the party responsible could void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
lncrease the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 1
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 1
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 1
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 1
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 1 2/17/20 9:02 AM
2/17/20 9:02 AM
2/17/20 9:02 AM
2/17/20 9:02 AM
2/17/20 9:02 AM
Open the camera cover and install eight (8) AA batteries in the battery compartment. Follow
the + and - polarities as indicated.
Insert the SD Card into the SD Card slot as shown. You
will hear an audible click when the card is fully inserted.
Slide the Mode switch to the SETUP position, press the ENTER button
to begin editing the time. Use the (UP) / V (DOWN) buttons to adjust
the hour digits. Press ENTER to select. Repeat to set minutes, press
ENTER to set correct time. Select AM/PM, press ENTER to continue.
Slide the Mode switch to the ON position. The battery level will
appear on the LCD screen and the camera is ready for use.
+
+
+
+
+
_
_
_
_
_
- Only use Alkaline or Lithium batteries. We recommend the use of Energizer™ or Moultrie batteries.
- Do not mix old and new batteries. Do not mix alkaline, lithium, or rechargeable batteries. Always replace ALL the batteries
at the same time.
- When the camera is not in use, please remove the batteries.
This product has been thoroughly tested and inspected before shipment. It is guaranteed from defects in material
and workmanship from the date of purchase for 1 year. The warranty is extended to 2 years if the product is registered
within 60 days of purchase. Under this limited guarantee we agree to replace or repair free of charge any parts which
have been found to be defective in original material or workmanship. Should you require in-warranty service, contact us at
.
You must register your camera at to activate your 2-year warranty.
Please visit for troubleshooting and helpful tips.
Please visit and complete the form or our Service Department will gladly answer
any questions you have.
Your camera is compatible with our Moultrie Mobile® cellular service when combined with the Moultrie® Field Modem.
Please visit for more information.
V
• We recommend the use of SDHC Class 10 SD cards up to 32 GB; camera will not operate without an SD card installed.
• If you have a 12V power source plugged into bottom of unit, leave batteries installed. They will act as a backup if power is lost.
• If the camera detects the battery level is 15% or below, the Low Battery screen (bL:L0) will show on display and the unit
will turn off.
• Do not mix old and new batteries. See important battery info on page 7.
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 2
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 2
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 2
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 2
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 2 2/17/20 9:02 AM
2/17/20 9:02 AM
2/17/20 9:02 AM
2/17/20 9:02 AM
2/17/20 9:02 AM
Use the buttons to choose between 1-9
to set a camera ID number. Images captured via your camera
will display the camera ID number. Press to lock in
your selection.
Use the buttons to change the display
to dELY” (Delete Yes). When the display shows dELY”
pressing will reformat and delete all images stored
on the SD card.
Thread mounting strap through slots on back of camera case.
Mount camera to a tree or pole approximately three (3) feet from
ground. May need to adjust for uneven terrain.
Face the camera North or South to avoid overexposure from the sun.
Clear brush away from the front of the camera to avoid
false-movement triggers.
When covering a game trail, face camera looking down the trail instead
of directly at it (see graphics below).
Select “ON” or “OFF”. Selecting “ON” will cause the oldest
files to be overwritten with new images when the SD card
reaches full capacity. Selecting “OFF” will disable the camera
from saving images once SD Card capacity is full.
Hi
Hi
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 3
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 3
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 3
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 3
A-Series SMU_2020_Manual_ENGLISH_2-17-20.indd 3 2/17/20 9:02 AM
2/17/20 9:02 AM
2/17/20 9:02 AM
2/17/20 9:02 AM
2/17/20 9:02 AM

Produkspesifikasjoner

Merke: Moultrie
Kategori: Kamera
Modell: AG-300

Trenger du hjelp?

Hvis du trenger hjelp med Moultrie AG-300 still et spørsmål nedenfor, og andre brukere vil svare deg