PCE Instruments PCE-T237 Bruksanvisning
PCE Instruments
Måleutstyr
PCE-T237
Les nedenfor 📖 manual på norsk for PCE Instruments PCE-T237 (6 sider) i kategorien Måleutstyr. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/6
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@industrial-needs.com
Manual
Tachometer
PCE-T237
3.2 Display Descriptions
PCE-T237
3-1 Reflective Mark
3-2 Signal Light Beam
3-3 PHOTO TACH. Sensor
3-4 Display
3-5 Backlit Key
3-6 CONTACT TACH. Key
3-7 Plus/Function Key
3-8 Minus/Memory Key
3-9 RPM adapter (CONE)
3-10 RPM adapter (FUNNEL)
3-11 Surface speed test wheel
3-12 Key Battery Cover On The Back
3-13 PHOTO TACH. Key
3-14 Power/Measurement
3-15 CONTACT TACH. Sensor
1
54
2
6
3
7
MULTIFUNCTIONAL
TACHOMETER
1. FEATURES
* In accordance with verification regulation
JJG105-2000 for tachometer.
* With the most complete functions for rotating
speed measurement
* Multifunctional, one instrument combines
PHOTO TACH. (Rotating speed, Cycle,
Frequency) & CONTACT TACH. (Rotation
speed, Cycle, Frequency, Surface speed,
Moving distance, Custom circumference
moving distance).
* Can also measure the number of pulse signals.
* Wide measuring range & high resolution.
* The last Value / max. Value / min. Value will be
automatically stored in memory and can be
obtained by pressing Memory Key.
* LCD display gives exact rpm with no guessing
or errors and saves battery energy.
* This tachometer used the exclusive one chip of
MICROCOMPUTER LSI-circuit and crystal
time base to accurately offer the high accuracy
measurement.
2. SPECIFICATIONS
Display : LCD ( Liquid Crystal Display)
Measurement range :
PHOTO TACH.: 2.5~99,999 RPM
CONTACT TACH. : 0.5~19,999 RPM
SURFACE SPEED: 0.05~1,999.9 m/min
0.2~6,560 ft/min
Frequency: 0.04~1666.65Hz
Resolution:
TACHOMETER: 0.1 RPM (0.5 ~ 999.9 RPM)
1RPM (over 1,000 RPM)
SURFACE SPEED:
0.01m/min. (over 10 m/min.)
0.1 m/min. (over 100 m/min.)
0.1 ft/min. (0.1 ~ 999.9 ft/min.)
1 ft/min. (over 1,000 ft/min.)
Accuracy : TACH.: (0.05%+1 RPM)
SURFACE SPEED: (0.05%+0.03m/min.)
Sampling Time:
PHOTO TACH. (1 sec. over 60 RPM).
CONTACT TACH. (1 sec. over 15 RPM)
Photo Tach. Detecting distance :
50 to 250mm / 2 to 10 inch.
(typical max. 600mm/24 inch ).
Battery: 4x1.5AAA(UM-4)battery
Operation temp. : 0-50°C (32-122°F)
Size: Main Unit: 185x72x28 mm
Weight : 130g (not including batteries)
Accessories :
Carrying case ...............................1pc.
Reflective tape marks (350mm).......2pc.
RPM adapter (CONE).....................1pc.
RPM adapter (FUNNEL).................1pc.
Surface speed test wheel.................1pc.
Operation manual...........................1pc.
4. MEASUREMENT MODE SELECTION
The Tachometer can be either PHOTO TACH.
and CONTACT TACH. The PHOTO TACH. can
measure Rotating speed, Cycle, Frequency.
The CONTACT TACH. can measure not only
Rotating speed, Cycle, Frequency, Surface
speed, Moving distance, Custom
circumference moving distance. Select the
intended measurement mode according to the
requirement.
4.1 PHOTO TACH. MEASUREMENT
4.1.1 Apply a reflective mark to the object being
measured. If the test RPM less than 50
RPM, suggest to attach more Reflective
Marks averagely. Then divided the reading
shown by the number of Reflective Marks
This TACHOMETER is small in size, light in
weight, easy to carry. Although complex and
advanced, it is convenient to use and
operate. Its ruggedness will allow many
years of use if proper operating techniques
are followed. Please read the following
instructions carefully and always keep this
manual within easy reach.
3-233-17
3-16
3-19
3-20
3-18
3-21
3-25
3-24
3-26
3-273-22
RPM
m/mi n ft /m in
m m s max min
C Lin
Hz
3. PANEL DESCRIPTIONS
3.1 Front Panel Descriptions
3-4
3-6 3-13
3-7 3-14
3-15
3-12
3-8
3-5
3-3
3-2
3-1
3-9
3-10
3-11
3-16 Maximum Value Indicator
3-17 Cycle Unit
3-18 Moving Distance Unit
3-19 Moving Distance Indicator
3-20 Custom Circumference Indicator
(Pulse Signal Number Indicator)
3-21 Battery Indicator
3-22 Surface Speed Unit
3-23 Monitor Indicator
3-24 Minimum Indicator
3-25 Rotation Speed Unit
3-26 Measurement Value
3-27 Frequency Unit
is the real RPM to get high resolution &
stability on display reading.
4.1.2 REFLECTIVE MARK
Cut and peel adhesive tape provided into
approx. 12mm (0.5 )square sand apply one
square to each rotation shaft.
a. The non-reflective area must always be
greater than the reflective area.
b. If the shaft is normally reflective, it must be
covered with black tape or black paint before
attaching reflective tape.
4.1.3 Press the Power/Measurement Key (3-14)
to turn on the meter.
4.1.4 Press the Plus/Function Key (3-7) to select
the intended parameter. Each time
pressing the Plus/Function Key (3-7), the
measuring parameter is converted once.
Corresponding unit or indicator of the
parameter will be displayed.
A. When the Rotation Speed Unit (3-25) is
displayed, rotation speed can be
measured.
B. When the Cycle Unit (3-17) is displayed,
cycle can be measured.
C. When the Frequency Unit (3-27) is
displayed, frequency can be measured.
4.1.5 Press the PHOTO TACH. Key (3-13), the
PHOTO TACH. Sensor emits a visible light
beam. Align the visible light beam with the
applied target. Verify that the Monitor
Indicator (3-23) is displayed when the
target passes thru the light beam. When
the reading stabilizes, press the PHOTO
TACH. Key (3-13) again.
4.1.6 During measuring, the last Value, max.
Value, min. Value are automatically
memorized. The data can be find by
pressing Minus/Memory Key(3-8). For
details see 7. MEMORY CALL
OPERATION.
4.2 CONTACT TACH. MEASURE ROTATION
SPEED, CYCLE, FREQUENCY
4.2.1 Install the RPM adapter (CONE) (3-9) or
the RPM adapter (FUNNEL) (3-10) onto
the CONTACT TACH. Sensor (3-15).
4.2.2 Press the Power/Measurement Key
(3-14) to turn on the meter.
4.2.3 Press the Plus/Function Key (3-7) to
select the intended parameter. Each time
pressing the Plus/Function Key (3-7), the
measuring parameter is converted once.
Corresponding unit or indicator of the
parameter will be displayed.
A. When the Rotation Speed Unit (3-25) is
displayed, rotation speed can be
measured.
B. When the Cycle Unit (3-17) is displayed,
cycle can be measured.
Produkspesifikasjoner
| Merke: | PCE Instruments |
| Kategori: | Måleutstyr |
| Modell: | PCE-T237 |
Trenger du hjelp?
Hvis du trenger hjelp med PCE Instruments PCE-T237 still et spørsmål nedenfor, og andre brukere vil svare deg
Måleutstyr PCE Instruments Manualer
25 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
Måleutstyr Manualer
- Måleutstyr Fluke
- Måleutstyr Megger
- Måleutstyr Kogan
- Måleutstyr Voltcraft
- Måleutstyr Klein Tools
- Måleutstyr PeakTech
- Måleutstyr Clean Air Optima
- Måleutstyr CSL
- Måleutstyr Kern
- Måleutstyr Einhell
- Måleutstyr Mitsubishi
- Måleutstyr Reely
- Måleutstyr Joy-it
- Måleutstyr Gossen Metrawatt
- Måleutstyr Extech
- Måleutstyr Flir
- Måleutstyr Testo
- Måleutstyr Ideal
- Måleutstyr Hikmicro
- Måleutstyr Siglent
- Måleutstyr Kopp
- Måleutstyr PICO
- Måleutstyr Wachendorff
- Måleutstyr Ermenrich
- Måleutstyr Beha-Amprobe
- Måleutstyr Adwa
Nyeste Måleutstyr Manualer
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024