PCE Instruments PCE-WS CR Bruksanvisning

Les nedenfor 📖 manual på norsk for PCE Instruments PCE-WS CR (4 sider) i kategorien Måleutstyr. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/4
APPLICATIONS
PCE-WS CR has been designed to be used in industrial applications: cranes, solar panels, wind turbines, weather stations,
greenhouses, irrigation systems...
The wind sensor must be xed on a vertical position.
PCE-WS CR
OPERATING
Rotating switch
CONECTION
+
Black: Common
Brown: Power supply
Blue: Neutral
Yellow: NA*Output
Up to 180 km/h of wind speed.
Output activation:
After a second*2 of wind speed over the set value.
Output deactivation:
Wind speed 1km/h*3 below the set value.
Minimum duration of the output pulse:
5 seconds.
The output is not latched.*
4
*1 NO output by default. For a NC output, contact.
*2 Output activation temporary hysteresis is factory congured. For other
values, contact. (Rango: 0-2047 segundos)
*3 Output deactivation hysteresis is factory congured. For other values,
contact. (Range: 1-5 km/h)
*4 No alarm latching by default. For alarm latching, contact. (Latching time,
range: 0-254 minutes)
Relay Output Conguration. Speed threshold.
0 — 20km/h
1 — 25km/h
2 — 30km/h
3 — 35km/h
4 — 40km/h
5 — 45km/h
6 — 50km/h
7 — 55km/h
8 — 60km/h
9 — 65km/h
A — 70km/h
B — 75km/h
C — 80km/h
D — 85km/h
E — 90km/h
F — 95km/h
To congure the speed threshold for the relay activation, unscrew the lid in the
anemometer base to access the rotating switch.
© PCE Instruments
DIMENSIONS
139
131
91
10
2
50
Ø122,73
Ø5,2
Ø15
50
Ø122,73
Ø5,2

Produkspesifikasjoner

Merke: PCE Instruments
Kategori: Måleutstyr
Modell: PCE-WS CR

Trenger du hjelp?

Hvis du trenger hjelp med PCE Instruments PCE-WS CR still et spørsmål nedenfor, og andre brukere vil svare deg




Måleutstyr PCE Instruments Manualer

Måleutstyr Manualer

Nyeste Måleutstyr Manualer