Sauter TB 2000-0.1F Bruksanvisning

Sauter Måleutstyr TB 2000-0.1F

Les nedenfor 📖 manual på norsk for Sauter TB 2000-0.1F (7 sider) i kategorien Måleutstyr. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/7

Sauter GmbH

Ziegelei 1

D-72336 Balingen

e-mail: info@kern-sohn.com

Phone : +49-[0]7433- 9933-0

Fax: +49-[0]7433- - 9933 149

Internet: www.sauter.eu

Instruction Manual Digital Coating

Thickness Gauge

SAUTER TB

Version 2.0

04/2020

TB- -e-2020 BA

PROFESSIONAL MEASURING

2 - -e-2020 TB BA

SAUTER TB

V. 2.0 04/2020

Instruction Manual Digital Coating Thickness

Gauge

Thank you for purchasing a digital coating thickness gauge from SAUTER. We hope

you will be very satised with the high quality of this measuring device and its extensive

functionality. For any questions, wishes and suggestions please do not hesitate to

Table of contents:

1. Introduction .................................................................................................... 3

1.1 General description .................................................................................................................. 3

2. Functions ........................................................................................................ 3

3. Technical data ................................................................................................ 4

4. Description of the control panel ................................................................... 5

5. Measuring procedure .................................................................................... 5

6. Oset-Accur ................................................................................................... 5

7. Calibration (Adjustment) ............................................................................... 6

8. Battery replacement ...................................................................................... 6

9. Adjusting foils ................................................................................................ 6

10. Correct handling of coating thickness measurement with external sensors

11. Troubleshooting 7 .............................................................................................

TB- -e-2020 3 BA

1. Introduction

1.1 General description

This coating thickness gauge is small, light and handy. Although it has complex and

advanced equipment, it is convenient and easy to use.

Its robustness allows it to be used for many years, provided that all instructions in this

manual are carefully followed.

Therefore, please keep them always within reach!

Note: It is strongly recommended to adjust the new meter before rst use, as

described in chapter 6. This will result in a higher measurement accuracy from

the beginning.

2. Functions

"This device complies with ISO standard 2178, making it equally suitable for use under

laboratory conditions as well as "in the eld" under harsh environmental conditions.

" In F mode, the thickness of non-magnetic layers, e.g. paint, plastic, enamelled

porcelain, copper, zinc, aluminium, chrome, lacquer layers, galvanised or

phosphorescent layers, alloys, etc. can be determined.

These layers should be on magnetic metals such as steel, iron, nickel etc.

"In the N- mode, the layer thickness of non-magnetic layers on non-magnetic metals.

It is used to measure anodizations, lacquer layers, glazes, colours, enamel, plastic

layers, powder coating etc. These should be on non-magnetic metals such as

aluminium, sheet metal, non-magnetic stainless steel and others.

"automatic switch-o to conserve battery power.

" Selectable units: mm, µm, inch (mil)

"The backlit display allows accurate reading

Produkspesifikasjoner

Merke:	Sauter
Kategori:	Måleutstyr
Modell:	TB 2000-0.1F

Trenger du hjelp?

Hvis du trenger hjelp med Sauter TB 2000-0.1F still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Måleutstyr Sauter Manualer

Sauter FA 50 Bruksanvisning

6 Januar 2025

Sauter TVO 500N300 Bruksanvisning

5 Januar 2025

Sauter 281-101 Bruksanvisning

5 Januar 2025

Sauter TI-HED Bruksanvisning

5 Januar 2025

Sauter HEA 100 Bruksanvisning

5 Januar 2025

Sauter 283-502 Bruksanvisning

5 Januar 2025

Sauter FC 1K-BT Bruksanvisning

5 Januar 2025

Sauter 283-302 Bruksanvisning

5 Januar 2025

Sauter TVL-XL Bruksanvisning

5 Januar 2025

Sauter 281-301 Bruksanvisning

5 Januar 2025

Måleutstyr Manualer

Nyeste Måleutstyr Manualer

Adwa AD310 Bruksanvisning

7 Januar 2025

Uni-T UT673PV Bruksanvisning

4 Januar 2025

Klein Tools ET19 Bruksanvisning

2 Januar 2025

Toolland 3472 Bruksanvisning

31 Desember 2025

Chauvin Arnoux C.A 6422 Bruksanvisning

29 Desember 2024

Chauvin Arnoux Terca 3 C.A 6470N Bruksanvisning

29 Desember 2024

Chauvin Arnoux C.A 1246 Bruksanvisning

29 Desember 2024

Megger PAT450 Bruksanvisning

29 Desember 2024

Megger HPG78 Bruksanvisning

29 Desember 2024

Aerospace Logic FL203 Bruksanvisning

28 Desember 2024