Sauter TE 1250-0.1F Bruksanvisning

Sauter Måleutstyr TE 1250-0.1F

Les nedenfor 📖 manual på norsk for Sauter TE 1250-0.1F (9 sider) i kategorien Måleutstyr. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/9

Sauter GmbH

Ziegelei 1

D-72336 Balingen

e-mail: info@kern-sohn.com

Phone : +49-[0]7433- 9933-0

Fax: +49-[0]7433- - 9933 149

Internet: www.sauter.eu

Instruction Manual Digital Coating

Thickness Gauge

SAUTER TE

Version 2.0

04/2020

TE- -e-2020 BA

PROFESSIONAL MEASURING

2 - -e-2020 TE BA

SAUTER TE

V. 2.0 04/2020

Instruction Manual Digital Coating Thickness

Gauge

Thank you for purchasing a digital coating thickness gauge from SAUTER. We hope

you will be very satised with the high quality of this measuring device and its extensive

functionality. For any questions, wishes and suggestions please do not hesitate to

Table of contents:

1. Introduction .................................................................................................... 3

2. Functions ........................................................................................................ 3

3. Technical data ................................................................................................ 3

4. Description of the control panel ................................................................... 5

5. Measuring procedure .................................................................................... 5

6. Adjustment ..................................................................................................... 6

7. Battery replacement ...................................................................................... 7

8. Adjustment Foils ............................................................................................ 7

9. Correct handling of coating thickness measurement with external sensors

10. General notes ................................................................................................. 8

11. Restore factory settings ................................................................................ 8

12. Notes ............................................................................................................... 8

TE- -e-2020 3 BA

1. Introduction

1.1 General description

This coating thickness gauge is small, light and handy. Although it has complex and

advanced equipment, it is convenient and easy to use.

Its robustness allows it to be used for many years, provided that all instructions in this

manual are carefully followed.

Therefore please keep them always within reach!

Note: It is strongly recommended to adjust the new meter before rst use, as

described in chapter 6. This will result in a higher measurement accuracy from

the beginning.

2. Functions

"This device complies with ISO 2178 and ISO 2361, as well as DIN, ASTM and BS

standards. This means that it can be used both under laboratory conditions and under

rough environmental conditions "in the eld".

"The F probe is used to determine the thickness of non-magnetic layers, e.g. paint,

plastic, enamelled porcelain, copper, zinc, aluminium, chrome, lacquer layers, etc.

These layers should be on magnetic metals such as steel, iron, nickel etc. This test

method is often used to measure the thickness of galvanised layers, lacquer layers,

enamelled porcelain layers, phosphorescent layers, copper plates, aluminium plates,

alloys, etc.

"The N- measuring probe is used to determine the thickness of non-magnetic and

insulating layers on non-magnetic metals.

It is used to measure anodizations, lacquer layers, glazes, colours, enamel, plastic

layers, powder coating etc. These should be on non-magnetic substrates such as

aluminium, sheet metal, non-magnetic stainless steel and others.

"Manual or automatic switch-o to conserve battery power.

"Two measurement modes: -single and continuous

"Conversion of units metric/imperia

"Wide measuring range and high resolution

"The backlit display allows accurate reading

" Can be connected to a PC for data transfer via RS 232 interface for statistical

purposes. Cable and software are available as optional accessories (ATC-01).

3. Technical data

TE 1250-0.1F

TE 1250-0.1FN

TE 1250-0.1N

Display

4 digits, 10mm LCD display with backlight

Measuring range

0 to 1250 m / 0 to 50 mil (standard) μ

Resolution

0,1 µm (0 to 99,9 µm), 1 µm (over 100)

Produkspesifikasjoner

Merke:	Sauter
Kategori:	Måleutstyr
Modell:	TE 1250-0.1F

Trenger du hjelp?

Hvis du trenger hjelp med Sauter TE 1250-0.1F still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Måleutstyr Sauter Manualer

Sauter CJ P2 Bruksanvisning

8 Januar 2025

Sauter 289-100 Bruksanvisning

8 Januar 2025

Sauter DB 500-2 Bruksanvisning

8 Januar 2025

Sauter DB 0.5-4 Bruksanvisning

8 Januar 2025

Sauter 281-752 Bruksanvisning

8 Januar 2025

Sauter 287-102 Bruksanvisning

8 Januar 2025

Sauter 283-422 Bruksanvisning

8 Januar 2025

Sauter DB 20-3 Bruksanvisning

8 Januar 2025

Sauter 281-890 Bruksanvisning

8 Januar 2025

Sauter 281-451 Bruksanvisning

8 Januar 2025

Måleutstyr Manualer

Nyeste Måleutstyr Manualer

Owon DGE3000 Bruksanvisning

16 Januar 2025

Voltcraft FM-80 Bruksanvisning

16 Januar 2025

Kyoritsu KEW3125B Bruksanvisning

16 Januar 2025

Owon HSA1016 Bruksanvisning

16 Januar 2025

Tempo OFL100 OTDR Bruksanvisning

15 Januar 2025

Duro Pro D-KLL 10 Bruksanvisning

15 Januar 2025

Duro Pro D-LEM 40 Bruksanvisning

15 Januar 2025

Duro Pro D-LEM 40/1 Bruksanvisning

14 Januar 2025

PeakTech 6226 Bruksanvisning

14 Januar 2025

Ebro PHT 830 Bruksanvisning

14 Januar 2025