Sauter TF 1250-0.1FN Bruksanvisning
Sauter
Måleutstyr
TF 1250-0.1FN
Les nedenfor 📖 manual på norsk for Sauter TF 1250-0.1FN (10 sider) i kategorien Måleutstyr. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/10
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433- - 9933 149
Internet: www.sauter.eu
Instruction Manual Digital Coating
Thickness Gauge
SAUTER TG/TF
Version 2.0
04/2020
GB
TG_TF- -e-2020 BA
PROFESSIONAL MEASURING
TF 1250-0.1FN
TG 1250-0.1FN
2 TG_TF- -e-2020 BA
GB
SAUTER TG/TF
V. 2.0 04/2020
Instruction Manual Digital Coating Thickness
Gauge
Thank you for purchasing a digital coating thickness gauge from SAUTER. We hope
you will be very satised with the high quality of this measuring device and its extensive
functionality. For any questions, wishes and suggestions please do not hesitate to
contact us.
Table of contents:
1. Introduction .................................................................................................... 3
2. Functions ........................................................................................................ 3
3. Technical data ................................................................................................ 4
4. Front panel description ................................................................................. 5
5. Measurement procedure ............................................................................... 6
6. Statistics ......................................................................................................... 6
7. How to store and recall readings 7..................................................................
8. How to delete readings .................................................................................. 7
9. Transfer of readings to a PC......................................................................... 7
10. Calibration ...................................................................................................... 8
11. Battery replacement ...................................................................................... 8
12. Adjustment foils ............................................................................................. 8
13. Correct handling at Coating Thickness Measurement with external
sensors ...................................................................................................................... 9
14. Trouble shooting 9............................................................................................
15. Restore factory settings ................................................................................ 9
16. Annotations .................................................................................................. 10
TG_TF- -e-2020 3 BA
1. Introduction
1.1 General description
This coating thickness gauge is small, light and handy. Although it has complex and
advanced equipment, it is convenient and easy to use.
Its robustness allows it to be used for many years, provided that all instructions in this
manual are carefully followed.
Therefore please keep them always within reach!
Note: It is strongly recommended to adjust the new meter before rst use, as
described in chapter 6. This will result in a higher measurement accuracy from
the beginning.
2. Functions
"This device complies with ISO 2178 and ISO 2361, as well as DIN, ASTM and BS
standards. This means that it can be used both under laboratory conditions and under
rough environmental conditions "in the eld".
"In F mode, the thickness of non-magnetic layers, e.g. paint, plastic, enamelled
porcelain, copper, zinc, aluminium, chrome, lacquer layers etc., is measured.
These layers should be on magnetic materials such as steel, iron, nickel, etc. This test
method is often used to measure the thickness of galvanised layers, lacquer layers,
enamelled porcelain layers, phosphorescent layers, copper plates, aluminium plates,
alloys, paper etc.
"In the N- mode, the layer thickness of non-magnetic layers on non-magnetic metals.
It is used to measure anodizations, lacquer layers, glazes, colours, enamel, plastic
layers, powder coating etc. These should be on non-magnetic substrates such as
aluminium, sheet metal, non-magnetic stainless steel and others.
"Automatic recognition of the carrier material
"Manual or automatic switch-o to conserve battery power.
"Two measurement modes: -single and continuous
"Metric/imperial unit conversion
"Wide measuring range and high resolution
"The backlit display allows accurate reading
"Up to 99 measured values can be stored.
"A statistics function is available
" Can be connected to a PC for data transfer via RS 232 interface for statistical
purposes Cable and software are available as optional accessories (ATC-01). .
Produkspesifikasjoner
| Merke: | Sauter |
| Kategori: | Måleutstyr |
| Modell: | TF 1250-0.1FN |
Trenger du hjelp?
Hvis du trenger hjelp med Sauter TF 1250-0.1FN still et spørsmål nedenfor, og andre brukere vil svare deg
Måleutstyr Sauter Manualer
6 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
Måleutstyr Manualer
- Måleutstyr Fluke
- Måleutstyr IFM
- Måleutstyr Megger
- Måleutstyr Kogan
- Måleutstyr Festo
- Måleutstyr Voltcraft
- Måleutstyr Klein Tools
- Måleutstyr PeakTech
- Måleutstyr Clean Air Optima
- Måleutstyr Chauvin Arnoux
- Måleutstyr CSL
- Måleutstyr Kern
- Måleutstyr Einhell
- Måleutstyr Mitsubishi
- Måleutstyr PCE
- Måleutstyr Reely
- Måleutstyr Joy-it
- Måleutstyr Gossen Metrawatt
- Måleutstyr PCE Instruments
- Måleutstyr Extech
- Måleutstyr Techno Line
- Måleutstyr Stabila
- Måleutstyr Uni-T
- Måleutstyr Sonel
- Måleutstyr Flir
- Måleutstyr Testo
- Måleutstyr Ideal
- Måleutstyr Hikmicro
- Måleutstyr Siglent
- Måleutstyr Kopp
- Måleutstyr PICO
- Måleutstyr Wachendorff
- Måleutstyr Ermenrich
- Måleutstyr Beha-Amprobe
- Måleutstyr Adwa
- Måleutstyr Toolland
- Måleutstyr Angler
- Måleutstyr Crowcon
- Måleutstyr Aerospace Logic
- Måleutstyr MGL Avionics
- Måleutstyr Dostmann Electronic
- Måleutstyr Kübler
- Måleutstyr HT Instruments
- Måleutstyr Rotronic
Nyeste Måleutstyr Manualer
7 Januar 2025
4 Januar 2025
2 Januar 2025
31 Desember 2025
29 Desember 2024
29 Desember 2024
29 Desember 2024
29 Desember 2024
29 Desember 2024
28 Desember 2024