Siemens RDE100FP Bruksanvisning
Les nedenfor 📖 manual på norsk for Siemens RDE100FP (4 sider) i kategorien Termostat. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/4
1/4 s - - Operating Instruction CB1B1426en_01 / 2013 07 05 Siemens Building Technologies
s
I Operating nstructions
RDE100 FP
The RDE100FP rogrammer pis a with 3 "Fil Pilote" zones lectto se Comfort or Economy for different mode
zones at any time.
Note: - The Comfort setpoint must be set directly on each radiator’s thermostat
- T " he radiator’s operating mode must be set to "Automatic
1 Display
Stop mode
Confirmation
Auto Timer mode
F
Room temperature in
degrees Fahrenheit
View and set Auto Timer
Comfort mode
C
Room temperature in
degrees Celsius
Economy mode
Button lock activated
Escape Room temperature
Setting the weekday and
the time ayof d
Display of zone
Holiday mode setting Weekday 1 = Monday
Weekday 7 = Sunday
T ime of day
Timer bar
Morning: 12 hour format-
Afternoon: 12 hour format-
Current room
temperature
2 Change operating mode
3 Set
4 Ok
5 Decrease zone value
6 Increase zone value
Do you want to the time of day set and the weekday?
Set
Ok
+
–
Mode
!
Proceed as follows:
• Press Set and select
• Press Ok and the time of day flashes for setting
• Press + – or to set the time of day
• Press Ok to confirm
• W ; eekday flashes press + – or to select the weekday
• Press Ok to save
• Press M ode to exit or wait for the program to exit automatically
Note:
In the event of power failure followed by power restoration the time of day that the a , flashes means , which user
must adjust it repeat the steps from point 3 above. and
All others setting are saved.
Until the time , the program sends protection all available zones. setting made is commands to
Do you want to lock the buttons?
M Mode Press and hold ode for at least 7 seconds to activate a button lock. Repeat to unlock.
The unit operates normally when the buttons are locked, but changes cannot be made.
Do you want to set your Holiday mode?
Set
Ok
+
–
M ode
!
You can enable Holiday zone mode for all s .The radiator managed by the programmer controls the room
temperature with the rotection setpoint. P
• Press Set and select
• Press Ok to confirm
• Press + – or to set s m the number of days for holiday (0 = Holiday ode Off)
• Press Ok to save
• When Holiday mode is activated, the remaining days are displayed
Note:
If M ode e .is pressed while Holiday mode is , the function active is deactivated and th symbol disappears
Energy saving tips without loss of comfort
• T Select Auto imer mode during the heating period and set the time switch as desired
• - Select Economy or Holiday mode for longer periods of non occupancy and during the summer
2/4 s - - Operating Instruction CB1B1426en_01 / 2013 07 05 Siemens Building Technologies
Do you want to change the operating mode?
Mode
+
–
!
For each zone (1, 2 or 3), the unit allows you
to select Comfort, Economy or automatic
mode.
Press + – or z 3; , to select one 1, 2 or then
select the mode using the operating Mode
button.
Comfort mode is the permanent (24 h)
selection of Comfort. Select this operating
mode to maintain Comfort temperature the
without time switch during occupancy (e.g.
periods).
Economy mode is the permanent (24 h)
selection of Economy. Select this operating
mode to maintain Economy temperature the
without time switch (e.g. during the summer
when heating is is used forO )ff . It non-
occupancy periods when you want to
maintain the Economy temperature e.g. at (
night).
AUTO
In Auto Timer mode, the operating
modes (Comfort, Economy) are changed
automatically according to the time switch
settings.
Note:
Stop mode is a special mode when all
" " Fil Pilote stop signals are sent to all valid
and active zones. During Stop mode, you
can only do tasks, either 2 make parameter
settings or the weekday and set the of time
day. When Stop mode is enabled, the zone
number disappears.
You can enable the number of zones via
parameter settings (P18); the default value
is 3.
Do you want to enter your own time switch?
Option 1: Time switch with individual day settings
(P11=0)
Set
Ok
+
–
M ode
!
For the selected zone, you can select
Comfort or Economy mode 15 minute in -
steps throughout the day. The 0:00 to 24:00
hour time bar allow you to ses lect the
operating mode the respectivefor day(s).
Example:
0 6 12 24
18
1 2
Visible bars: Control to Comfort
temperature
Invisible bars: Control to Economy
temperature
When Auto imer mode is enabled, T
changeover between the operating modes is
automatic after the settings are saved.
Proceed as follows:
1) Press + – or to select the zone.
2 ) Press Set and select
AUTO
.
3 ) Press Ok to confirm.
4 T . ) ime switch for Mon (1) is displayed
5) Press + – or to select the day,
from Mon (1) to Sun (7).
6 ) Press O k to confirm the selection and
initiate time programming.
During programming:
7 ) Press Mode to select the operating
mode (Comfort or Economy) or
8) Press + – or to set the time 15 of day in -
minute teps operating s for the selected
mode.
9 ) Press Ok to save the time switch.
10) Repeat remaining days (if steps 5-9 for all
re or quired),
11) Press Mode or wait for the program to exit
automatically.
Note:
Repeat the above steps to program the
remaining zones.
3/4 s - - Operating Instruction CB1B1426en_01 / 2013 07 05 Siemens Building Technologies
Option 2: Time switch with the ttingssame 7 day se-
(P11=1)
Set
Ok
+
–
M ode
!
You can set that all the time switch so
settings apply to the 7 weekdays .
Example:
0 6 12 24
18
1 2
Visible bars: Control to Comfort
temperature
Invisible bars: Control to Economy
temperature
Proceed as follows:
1) Press + – or to select one.the z
2) Set the parameter (P11=1). Please refer
to section "Do you want to change
parameters".
3 ) Press Set and select
AUTO
.
4 ) Press Ok to confirm.
5 – ) Time switch for Mon (1) Sun (7) is
displayed.
6 ) Press Ok to initiate time programming.
During rogrammingp :
7 ) Press Mode to select the operating mode
(Comfort or Economy) or
8) Press + – or to set the time 15 of day in -
minute steps operating for the selected
mode.
9 . ) Press Ok to save the settings
10 to ) Press Mode or wait the program for
exit automatically.
Note:
Repeat the above steps to program the
remaining zones.
Information on the standard "F P " il ilote –
s etpoints
The RDE1001FP is a programmer to manage the used
operating modes.
The setpoints are managed by your electrical radiators or
heaters.
. Please refer respective Oto the perating Instructions
According to the standard:"F P " il ilote
The Comfort setpoint must be set directly on the
thermostat of electrical radiator or heater.the
The Economy setpoint is 3 °C below the Comfort
setpoint.
The edProtection setpoint is fix at 7 or 8 . °C
Option 3: Time switch with 5-2-day settings
(P11=2)
Set
Ok
+
–
M ode
!
You can set Monday Friday and Saturday - -
Sunday at the same time.
Example:
0 6 12 24
18
1 2
Visible bars: Control to Comfort
temperature
Invisible bars: Control to Economy
temperature
Proceed as follows:
1) Press + – or to select the zone.
2) Set the parameter (P11=2). Please refer
to section ou want to change "Do y
parameters?".
3) Press Set and select
AUTO
.
4) Press Ok to confirm.
5) Time switch for Mon – (1) Fri (5) is
displayed.
6) Press + – or to select Mon – (1) Fri (5) or
Sat Sun – (6) . (7)
7) Press Ok to confirm the selection and
initiate time programming.
During programming:
8) Press Mode to select the operating mode
(Comfort or Economy), or
9) Press + – or to set 15 the time of day in -
minute steps operating for the selected
mode.
10) Press to save the Ok settings.
11) Repeat step 10 for the other period if s 6-
necessary, otherwise
12) Press or wait for the program to Mode
exit automatically.
Note:
Repeat the above steps to program the
remaining zones.
Factory default for 7- t day ime switch
Default
value
Day/s Comfort mode Economy mode
Mo (1) –
Fr (5)
6:00 – 8:00 hr
17:00 – 22:00 hr
22:00 – 6:00 hr
8:00 – 17:00 hr
Sa (6) –
Su (7)
– – 7:00 22:00 hr 22:00 7:00 hr
Produkspesifikasjoner
| Merke: | Siemens |
| Kategori: | Termostat |
| Modell: | RDE100FP |
Trenger du hjelp?
Hvis du trenger hjelp med Siemens RDE100FP still et spørsmål nedenfor, og andre brukere vil svare deg
Termostat Siemens Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
Termostat Manualer
- Termostat ORNO
- Termostat Bosch
- Termostat Boneco
- Termostat EBERLE
- Termostat Schwaiger
- Termostat AEG
- Termostat TP Link
- Termostat Oreg
- Termostat Netatmo
- Termostat Busch-Jaeger
- Termostat Brennenstuhl
- Termostat Danfoss
- Termostat Somfy
- Termostat Panasonic
- Termostat Schneider
- Termostat EMOS
- Termostat Heatit
- Termostat Dimplex
- Termostat Velleman
- Termostat GE
- Termostat Nexa
- Termostat Nobo
- Termostat Tru Components
- Termostat Bearware
- Termostat Elgato
- Termostat Avidsen
- Termostat STI
- Termostat Hunter
- Termostat Basetech
- Termostat TFA
- Termostat Tesla
- Termostat Renkforce
- Termostat REMKO
- Termostat ATAG
- Termostat Drayton
- Termostat Jung
- Termostat Ambiano
- Termostat Crestron
- Termostat Xavax
- Termostat Techno Line
- Termostat Remeha
- Termostat Heatmiser
- Termostat Wolf
- Termostat GENERAL Life
- Termostat Silvercrest
- Termostat AVM
- Termostat HomePilot
- Termostat Elektrobock
- Termostat Corberó
- Termostat Perel
- Termostat Delta Dore
- Termostat Homematic IP
- Termostat Vimar
- Termostat Emerson
- Termostat Salus
- Termostat Fenix
- Termostat Honeywell
- Termostat Junkers
- Termostat Eliwell
- Termostat Grasslin
- Termostat Jumo
- Termostat Enda
- Termostat Orbis
- Termostat Fantini Cosmi
- Termostat Vemer
- Termostat Qubino
- Termostat Theben
- Termostat EQ3
- Termostat Etherma
- Termostat Saunier Duval
- Termostat Gewiss
- Termostat Viessmann
- Termostat Bticino
- Termostat Conrad
- Termostat Econo-Heat
- Termostat Elro
- Termostat Gira
- Termostat Tado
- Termostat Brink
- Termostat Emmeti
- Termostat Itho
- Termostat Bryant
- Termostat Aube
- Termostat Baxi
- Termostat Seitron
- Termostat Amfra
- Termostat Vaillant
- Termostat Carel
- Termostat Buderus
- Termostat Optima
- Termostat Frico
- Termostat UPM
- Termostat Computherm
- Termostat Veria
- Termostat Innogy
- Termostat Nefit
- Termostat ICY
- Termostat Levica
- Termostat Itho-Daalderop
- Termostat Carrier
- Termostat Radson
- Termostat ChiliTec
- Termostat King
- Termostat ACV
- Termostat Landis Gyr
- Termostat Nest
- Termostat Oventrop
- Termostat IMIT
- Termostat Horstmann
- Termostat ELKO
- Termostat Alecto
- Termostat Google
- Termostat Emko
- Termostat Wachendorff
- Termostat MundoControl
- Termostat Otio
- Termostat Rose LM
- Termostat Tylö
- Termostat Sinustec
- Termostat TrickleStar
- Termostat Finder
- Termostat Sygonix
- Termostat Warmup
- Termostat Plugwise
- Termostat Lowes
- Termostat Go Green
- Termostat Drayton Erie
- Termostat Intertechno
- Termostat EQ-3
- Termostat Johnson Control
- Termostat RWE
- Termostat Webasto
- Termostat Tellur
- Termostat OJ ELECTRONICS
- Termostat Zehnder
- Termostat Plieger
- Termostat HomeMatic
- Termostat Eneco
- Termostat VDH
- Termostat Maico
- Termostat Yokis
- Termostat Eurotronic
- Termostat HQ
- Termostat Ouellet
- Termostat THERMAFLEX
- Termostat Truma
- Termostat Wallair
- Termostat AWB
- Termostat PECO
- Termostat Worcester-Bosch
- Termostat 2Heat
- Termostat EasyTemp
- Termostat Hugo Muller
- Termostat Watts
- Termostat Westfalia
- Termostat Oregon Scientific
- Termostat H-Tronic
- Termostat Z-Wave
- Termostat Easy Timer
- Termostat Fibaro
- Termostat SPC
- Termostat Muller
- Termostat Bulex
- Termostat Helios (Amfra)
- Termostat IR-V
- Termostat Eqiva
- Termostat Hager
- Termostat Energenie
- Termostat Thermy
- Termostat Ferroli
- Termostat Niko
- Termostat Stiebel Eltron
- Termostat De Dietrich
- Termostat POER
- Termostat Technoline
- Termostat Magnum
- Termostat Cotech
- Termostat Hornbach
Nyeste Termostat Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024