Timex T2N838 Bruksanvisning

Timex Klokke T2N838

Les nedenfor 📖 manual på norsk for Timex T2N838 (2 sider) i kategorien Klokke. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
I
I
WED 14
I
I
WED 14
I
I
WED 14
WED 14
IN MIDDLE OUT
INDIGLO®NIGHT-LIGHT
Press button or crown to activate light. Electroluminescent technology used
in the INDIGLO®night-light illuminates entire watch face at night and in
low light conditions.
START WATCH
Important: Set day and date first! Remove guard from crown and
push in. For screw-in setting crown, turn COUNTERCLOCKWISE to
loosen. Note: Crown can be located at 3 o’clock or 6 o’clock position.
SET DAY
Pull crown to “middle” position and turn CLOCKWISE until correct day
appears. If day does not change, pull crown to “out” position and turn
CLOCKWISE or COUNTER CLOCKWISE through necessary number of
24 hour periods until correct day appears.
SET DAT E QUICK - DAT E®FEAT URE
3-Position Crown: Pull crown to “MIDDLE” position and turn CLOCK-
WISE or COUNTER CLOCKWISE until correct date appears.
2-Position Crown: Pull crown to “OUT” position and turn CLOCKWISE
until date changes. Repeat until correct date appears. Adjust date when
month has less than 31 days. Push crown in when finished.
SET TIME
Pull crown all the way out and turn to correct time. Push crown in to
restart. For screw-in setting crown, push crown in while turning
CLOCKWISE to tighten.
Watches with date: Note correct time of day (A.M. or P.M.) for proper
date function.
ROT ATING TIME RING (OPT I ONA L )
Position symbol ( ) at desired time
to start or end activity.
COMPASS DIRECTIONAL RI N G (OPT IONA L )
To get approximate compass reading, point hour hand
at sun. Adjust ring so S (South) is halfway between
hour hand and 12. Adjust every hour. Make sure hour
hand is always pointed towards the sun.
12 1
2
3
4
5
6
7
8
9
10
11
N
S
W
E
THANK YOU FOR PURCHASING YOUR TIMEX
®WATCH.
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years
from date of purchase for $5. You can pay with AMEX, Discover, Visa or
MasterCard by calling 1 800-448-4639 during normal business hours.
Payment must be made within 30 days of purchase. Name, address,
telephone number, purchase date, and 5-digit model number required.
You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box
1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your
Timex
®watch. Your model may not have all of the features
described in this booklet.
W92 905-095025 NA
(continued on reverse)
Elapsed ring Tide ring
14
I
I
14
NOTE: Date may need to be manually
updated at the end of each month by
following above procedure (otherwise
it will continue to 39 and then roll
over to 00).
Register your product at
SET DAT E
Caution:
Caution:
Caution:
Caution: Caution: Wearing or storing the watch with the crown in the “middle”
position will cause damage to the movement. Always return the crown
to the normal position, or if you wish to save the battery life while
storing the watch, in the “out” position.
The date function advances the date between the hours of 10 PM and
2 AM. Avoid setting the date during this time frame. If you attempt to set
the date during this time period, rotate the crown at a very slow rate to
avoid damaging the watch.
TACHYMETER
The tachymeter feature can be used to measure speed in miles per hour
(MPH), nautical miles per hour (knots) or kilometers per hour (KPH) using
the sweep second hand and the tachymeter scale. You need to know the
actual distance you are covering in miles or km. To prepare the watch to
use this feature, let the second hand reach the 12 o’clock position, and
pull the crown to the “OUT” position to stop the watch. As the object
passes the start line of your pre-determined distance, push the crown
to the “IN” position to start the second hand. As the object passes the
finish line of your pre-determined distance, pull the crown to the “OUT”
position to stop the second hand. Within the first minute, the second
hand will point to the rate for a one-mile (or one kilometer) course: if it
takes 45 seconds, the hand will point to 80 at that position – 80 MPH or
80 KPH. Any pre-determined distance longer than one-mile (or one kilo-
meter) will require the calculation to be adjusted for the actual distance.
Note: When you are finished using the tachymeter feature, you will need
to reset the watch to the correct time.
TIMEX INTERNATIONAL WARRANTY
(U.S. – LIMITED WARRANTY – PLEASE SEE FRONT OF INSTRUCTION BOOKLET
FOR TERMS OF EXT ENDED WARRANTY OFFER)
Your TIMEX
®watch is warranted against manuf actu ring defects by Timex Group USA, Inc. for a period
of ONE YEAR from the original pu rchase date. Timex and its worldwide affiliates will honor t his
Int ernat ion al Warranty.
Please note that Timex may, at its option, repair your watch by installing new or thoroughly
reconditioned and in spected compon ents or replace it with an iden tical or similar model.
IMPORTANT — PLEASE NOTE T HAT T HIS WARRANT Y DOES N OT COVER DEFECTS OR DAM-
AGES TO YOUR WATCH:
1) after t he warranty period expires;
2) if t he watch was not originally pu rchased from an aut horized Timex retailer;
3) from repair services not perf ormed by T imex;
4) from accidents, tamperin g or abuse; an d
5) lens or crystal, strap or band, watch case, at tachmen ts or battery. Timex may charge you for
replacing any of th ese part s.
THIS WARRANTY AND THE REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPL IED WARRANTY OF MERCHANT ABILITY OR
FITNESS FOR PART ICULAR PURPOSE. TIMEX IS NOT LIABL E FOR ANY SPECIAL, INCIDENTAL OR CON-
SEQUENTIAL DAMAGES. Some countries and states do not allow limitations on implied warrant ies
and do not allow exclusions or limitations on damages, so these limitat ion s may n ot apply t o you.
This warranty gives you specific legal rights and you may also have other rights which vary from
country to country and state to stat e.
To obtain warranty service, please return your watch to Timex, one of its affiliates or the Timex retail-
er wh ere the watch was purchased, togeth er with a completed original Watch Repair Coupon or, in
the U.S. and Canada on ly, the completed original Watch Repair Coupon or a written statement iden-
tif ying your name, address, telephon e number and dat e and place of purchase. Please include th e
following wit h your watch t o cover postag e and handling (th is is not a repair charge): a US$ 8.00
check or money order in the U.S.; a CAN$7.00 cheque or money order in Canada; and a U2.50
chequ e or mon ey order in the U.K. In ot her countries, Timex will charge you for postage an d han -
dlin g. NEVER INCLUDE A SPECIAL WATCHBAND OR ANY OTHER ARTICLE OF PERSONAL VALUE IN
YOUR SHIPMENT.
For t he U.S., please call 1-800-448-4639 for additional warranty information. For Can ada, call 1-800-
263-0981. For Brazil, call +55 (11) 5572 9733. For Mexico, call 01-800-01-060-00. For Central America,
the Caribbean, Bermuda an d the Bahamas, call (501) 370-5775 (U.S.). For Asia, call 852-2815-0091.
For th e U.K., call 44 020 8687 9620. For Portu gal, call 351 212 946 017. For France, call 33 3 81 63
42 00. For Germany/Austria, call +43 662 889 2130. For the Middle East and Africa, call 971-4-
310850. For other areas, please contact your local Timex retailer or Timex dist ribut or for warranty
inf ormation. In Canada, th e U.S. and in certain other locations, participating Timex retailers can pro-
vide you wit h a postage-paid, pre-addressed Watch Repair Mailer f or your conven ience in obtainin g
factory service.
©2010 Timex Group USA, Inc. TIMEX and QUICKDATE are registered trademarks of Timex Group USA,
Inc. INDIGL O is a registered trademark of Indiglo Corporat ion in the US. and other countries.
If your watch is water-resistant, meter marking or (O) is indicated.
Water-Resistance Depth p.s.i.a.* Water Pressure Below Surface
30m/98ft 60
50m/164ft 86
100m/328ft 160
200m/656ft 284
*pounds per square inch absolute
WAT ER A N D SH O C K RES I S TANCE
WARNING: TO MAINTAIN WATER RESISTANCE ON ANY WATCH,
THE CROWN SHOULD NOT BE PULLED OUT WHEN THE WATCH IS
SUBMERGED IN WATER. ADDITIONALLY, PUSHERS ON WATCHES
WITH A WATER-RESISTANCE DEPTH RATING OF LESS THAN 200
METERS, SHOULD NOT BE PUSHED WHEN SUBMERGED IN WATER.
EITHER OF THESE ACTIONS COULD RESULT IN WATER ENTERING THE
WATCH CASE.
1. Watch is water-resistant only as long as crystal, crown and case
remain intact.
2. Watch is not a diver watch and should not be used for diving.
3. Screw-in setting crown and case back must be screwed into case to
assure water-resistance (see Set Time). (Optional)
4. Rinse watch with fresh water after exposure to salt water.
5. Shock-resistance will be indicated on watch face or caseback.
Watches are designed to pass ISO test for shock-resistance. However
avoid damaging crystal/lens.
BA T T E RY
Timex strongly recommends that a retailer or jeweler replace
battery. If applicable, push reset button when replacing battery. Battery
type is indicated on caseback. Battery life estimates are based on
certain assumptions regarding usage; battery life may vary depending
on actual usage.
DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP
LOOSE BATTERIES AWAY FROM CHILDREN.
BRACELET LINK REMOVAL
Removing Links: Place bracelet upright
and insert pointed tool in opening of link.
Push pin forcefully in direction of arrow
until link is detached (pins are designed to
be difficult to remove). Repeat until desired
number of links are removed.
Reassembly: Rejoin bracelet parts. Push pin back into link in opposite
direction of arrow. Press pin down securely into bracelet until it is flush.
SOLID LINK BRACELET
Removing Links: Using a very small screw-
driver, remove screws by turning counter-
clockwise. Repeat until desired number of
links are removed. Do not remove links adja-
cent to clasp.
Reassembly: Rejoin bracelet parts and
insert screw in end of opening where it was
removed. Turn screw clockwise until tight and flush with bracelet.
Fig. 1 Fig. 2 Fig. 3
BR A C E L E T A D J US T MENT
SLIDING CLASP BRACELET
Open locking plate. Move clasp to desired bracelet
length. Exert pressure while holding locking plate and
slide clasp back and forth until it engages in grooves
on underside of bracelet. Press locking plate down
until it snaps closed. Clasp can be damaged if exces-
sive force is used.
FOLDOVER CLASP BRACELET
Find spring bar that connects bracelet to clasp. Using a pointed tool
(Fig. 1), push spring bar in and gently twist bracelet to disengage.
Determine wrist size, then insert spring bar in correct bottom hole
(Fig. 2). Push down on spring bar, align with top hole and release to lock
in place (Fig. 3).
A JU S T EM EN

Produkspesifikasjoner

Merke: Timex
Kategori: Klokke
Modell: T2N838

Trenger du hjelp?

Hvis du trenger hjelp med Timex T2N838 still et spørsmål nedenfor, og andre brukere vil svare deg