WAC Lighting ME-808 Bruksanvisning

Les nedenfor 📖 manual på norsk for WAC Lighting ME-808 (1 sider) i kategorien Lettelse. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/1
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUNE, 2014
INSTALLATION INSTRUCTION
Low Voltage LED MR16 Display Spot Lights
ME-808
SAFETY INSTRUCTION
Always turn o power at fuse box prior to installation to prevent electrical shock.
For installation by a qualied electrician.
Line voltage wire must be 12awg BX or Romex wire.
Install over a standard 4 inch junction box.
All wires must be contained in the junction box.
TO HARD WIRE:
1. Loosen the three canopy screws twist and separate
the canopy cover from the base plate.
2. Remove knock out from the base plate.
3. Guide the white and black wires from the transformer
through the knock out in the base plate and into the
Junction box.
4. Connect with like colored line volt wires from the
junction box to transformer wires, with wire nuts
(supplied).
5. Connect green grounding wire from junction box
(may be bare copper wire) to green wire from xture.
6. Attach the base plate to a junction box using
slotted holes.
7. Mount the canopy to the base plate by twisting
key holes over three screws in base plate.
8. Tighten screws to secure canopy.

Produkspesifikasjoner

Merke: WAC Lighting
Kategori: Lettelse
Modell: ME-808

Trenger du hjelp?

Hvis du trenger hjelp med WAC Lighting ME-808 still et spørsmål nedenfor, og andre brukere vil svare deg




Lettelse WAC Lighting Manualer

Lettelse Manualer

Nyeste Lettelse Manualer