Advantech EKI-2701MPI-AE Bruksanvisning
Les nedenfor 📖 manual på norsk for Advantech EKI-2701MPI-AE (2 sider) i kategorien Splitter. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2
1 Startup Manual
Overview
EKI-2701MPI is new generation which compliant
IEEE 802.3af/at/bt. The high-power PoE standard
boosts the power budget of each port to 60W or even
90W with PD device.
With the technology of PoE (Power over Ethernet),
both data and electrical power to Ethernet-enabled
devices are using a standard CAT5 cable. The
EKI-2701MPI BT PoE solution use the same cabling
standard with IEEE 802.3af/at. Which instead of
delivering power over to 4-pair twisted UTP with a
maximum of up to 90 watts of power over Ethernet
cable.
Packing List
Before installation, please make sure that you have
received the following:
1 x EKI-2701MPI or EKI-2701MPI- injector PS
1 x 130W 56V Power Supply (EKI-2701MPI- PS)
1 x Din-Rail, 1 x Wall-mount kit
If anything is missing or damaged, contact your
distributor or sales representative immediately.
Datasheet
For more detailed information, please refer to the full
manual which can be found on the Advantech’s
website.
Notes
For more information on this and other Advantech
products, please visit our websites at:
http://www.advantech.com/products
For technical support and service:
http://www.advantech.com/support/
This startup manual is for EKI-2701MPI &
EKI-2701MPI-PS
1st Edition
Nov. 2018
Specications
General
Compatibility: IEEE 802.3, 802.3u, 802.3x,
802.3af/at/bt, 802.3ab
LAN: 10/100/1000Base-T (X)
Transmission Distance: Up to 100 m
Transmission Speed: Up to 1000Mbps
Connectors:
- 1 x RJ45 W/ Data- in
- 1 x RJ45 W/ PoE-out
LED Indicators: PoE, SYS
Power
:
:
:
::
- Power Consumption Max. 95 W (Full load PoE)
- Power Input 55~57 VDC (Single input)
- Power Output 90W
- Connectors 6P Pluggable Terminal Block,
DC Jack
Dimensions (W x H x D):
84 x 80 x 25mm (3.307" x 3.15" x 0.984")
Enclosure: IP40
Operating Temperature:
- EKI-2701MPI: - -75°C (-40~167°F) 40
- EKI-2701MPI-PS: 0 ~ 40°C (32 ~ 104°F)
Storage Temperature: -40 ~ 85°C (-40 ~ 185°F)
Humidity: 10 ~ 95% (non-condensing)
EMC: CE, FCC
Warranty: 2 years
Overview
DIP Switch Power Connection
The EKI-2701MPI injector supports dual power
inputs
1. Insert the positive and negative wires into the V+
and V- contacts on the terminal block connector.
2. Tighten the wire-clamps screws to prevent the DC
wires coming loose.
Din-rail Mounting
Startup Manual 2
Produkspesifikasjoner
| Merke: | Advantech |
| Kategori: | Splitter |
| Modell: | EKI-2701MPI-AE |
Trenger du hjelp?
Hvis du trenger hjelp med Advantech EKI-2701MPI-AE still et spørsmål nedenfor, og andre brukere vil svare deg
Splitter Advantech Manualer
1 Januar 2025
1 Januar 2025
Splitter Manualer
- Splitter Ecler
- Splitter Digitus
- Splitter Audio-Technica
- Splitter Tripp Lite
- Splitter Smart-AVI
- Splitter Radial Engineering
- Splitter Palmer
- Splitter Comprehensive
- Splitter ART
Nyeste Splitter Manualer
6 Januar 2025
2 Januar 2025
2 Januar 2025
2 Januar 2025
2 Januar 2025
2 Januar 2025
2 Januar 2025
2 Januar 2025
2 Januar 2025
2 Januar 2025