Advantech PCI-1710HGU-DE Bruksanvisning

Advantech Ikke kategorisert PCI-1710HGU-DE

Les nedenfor 📖 manual på norsk for Advantech PCI-1710HGU-DE (52 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 7 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/52

PCI-1710U Series

12-bit Multifunction Cards with

Universal PCI Bus

User Manual

PCI-1710U Series User Manual ii

The documentation and the software included with this product are copy-

righted 2009 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

This Manual Covers the Following Models

• PCI-1710U

• PCI-1710HGU

• PCI-1710UL

Part No. 2003171000 1st Edition

Printed in Taiwan November 2009

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

PCI-1710U Series User Manual iv

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the use

of shielded cables. This kind of cable is available from Advantech. Please

contact your local supplier for ordering information.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, appli-

cation software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Packing List

Before setting up the system, check that the items listed below are

included and in good condition. If any item does not accord with the

table, please contact your dealer immediately.

• PCI-1710U/HGU/UL DA&C card

• PCI-1710U/HGU/UL User Manual

• Companion CD-ROM with DLL drivers

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the

products from damage.

1. To avoid electrical shock, always disconnect the power from your

PC chassis before you work on it. Don't touch any components on

the CPU card or other cards while the PC is on.

2. Disconnect power before making any configuration changes. The

sudden rush of power as you connect a jumper or install a card may

damage sensitive electronic components.

Contents

Chapter 1 Introduction ..................................................... 2

1.1 Features ............................................................................. 3

1.2 Applications ..................................................................... 4

1.3 Installation Guide ............................................................. 5

Figure 1.1:Installation Flow Chart ................................. 6

1.4 Software Overview ........................................................... 7

1.5 Device Driver Programming Roadmap ............................ 8

1.6 Accessories...................................................................... 10

Chapter 2 Installation ..................................................... 12

2.1 Unpacking ....................................................................... 12

2.2 Driver Installation ........................................................... 13

Figure 2.1:Setup Screen of Advantech Automation Soft-

ware 14

Figure 2.2:Different Options for Driver Setup ............ 14

2.3 Hardware Installation ...................................................... 15

2.4 Device Setup & Configuration ....................................... 16

Figure 2.3:The Device Manager Dialog Box ............... 16

Figure 2.4:The Device Setting Dialog Box ................. 17

Figure 2.5:The Test Utility Dialog Box ....................... 17

Chapter 3 Signal Connections ........................................ 20

3.1 Overview ......................................................................... 20

3.2 Switch and Jumper Settings ........................................... 20

Figure 3.1:Connector and Switch Locations ................ 20

Table 3.1:Board ID Setting (SW1) .............................. 21

3.3 Signal Connections.......................................................... 22

Figure 3.2:I/O Connector Pin Assignments for the PCI-

1710U Series 22

3.3.1 I/O Connector Signal Description ................................ 23

Table 3.2:I/O Connector Signal Descriptions .............. 23

3.3.2 Analog Input Connections ........................................... 24

Figure 3.3:Analog Output Connections ....................... 27

3.3.3 Digital Signal Connections .......................................... 27

3.4 Field Wiring Considerations .......................................... 28

Appendix A Specifications ................................................. 30

A.1 Analog Input.................................................................... 30

A.2 Analog Output ................................ 33

A.3 Digital Input .................................................................... 33

A.4 Digital Output.................................................................. 34

A.5 Counter/Timer ................................................................. 34

A.6 General ............................................................................ 35

Appendix B Block Diagrams ............................................. 38

Appendix C Calibration ..................................................... 40

PCI-1710U Series User Manual vi

C.1 VR Assignment .............................................................. 41

Figure C.1:PCI-1710U VR Assignment ...................... 41

C.2 A/D Calibration ............................................................... 42

C.3 D/A Calibration (PCI-1710U/HGU) ............................... 45

CHAPTER

Introduction

This chapter introduces the PCI-1710U

cards and their typical applications.

Sections include:

• Features

• Applications

• Installation Guide

• Software Overview

• Device Driver Roadmap

• Accessories

PCI-1710U Series User Manual 2

Chapter 1 Introduction

The PCI-1710U/HGU is a PCI-Bus multifunction card for IBM PC/XT/

AT or compatible computers. It offers the five most desired measurement

and control functions:

• 12-bit A/D conversion

• D/A conversion

• Digital input

• Digital output

• Timer/counter.

A programmable-gain instrument amplifier lets you acquire different

input signals without external signal conditioning. An onboard 4K word

FIFO buffer provides high-speed data transfer and predictable perfor-

mance under Windows. Automatic channel scanning circuitry and

onboard SRAM let you perform multiple-channel A/D conversion and

individual gains for each channel.

The following sections of this chapter will provide further information

about features of the multifunction cards, a Quick Start for installation,

together with some brief information on software and accessories for the

PCI-1710U cards.

3 Chapter 1

1.1 Features

• 16 single-ended or 8 differential A/D inputs, switch selectable

• 12-bit A/D converter, up to 100 kHz sampling rate

• Programmable gain for each input channel

• Automatic channel/gain scanning

• Onboard 4K word FIFO buffer with software selectable interrupt

• Software selectable Bipolar/Unipolar analog input ranges

• 16 digital inputs and 16 digital outputs, TTL compatible

• Two 12-bit analog output channels

• Onboard programmable counter

• Universal PCI-Bus (Support 3.3V or 5V PCI-Bus signal)

• BoardID switch

PCI-1710U/HGU/UL offers the following main features:

PCI-Bus Plug & Play

The PCI-1710U cards use a PCI controller to interface the card to the PCI

bus. The controller fully implements the PCI bus specification Rev 2.2.

All configurations related to the bus, such as base address and interrupt

assignment, are automatically controlled by software. No jumper or

switch is required for user configuration.

Automatic Channel/Gain Scanning

PCI-1710U/HGU/UL features an automatic channel/gain scanning cir-

cuit. This circuit, instead of your software, controls multiplexer switching

during sampling. On-board SRAM stores different gain values for each

channel. This combination lets user perform multi-channel high-speed

sampling (up to 100 kHz) for each channel.

Onboard FIFO Memory

There are 4K samples FIFO for A/D (AI) on PCI-1710U/HGU/UL. This

is an important feature for faster data transfer and more predictable per-

formance under Windows system.

PCI-1710U Series User Manual 4

Onboard Programmable Timer/Counter

PCI-1710U/HGU/UL provides a programmable timer counter for gener-

ating pacer trigger for the A/D conversion. The timer/counter chip is

82C54, which includes three 16-bit counters of 10 MHz clock. One coun-

ter is used as an event counter for counting events coming from the input

channel. The other two are cascaded together to make a 32-bit timer for

pacer trigger time base.

BoardID Switch

PCI-1710U/HGU/UL has a built-in DIP switch that helps define each

card’s ID when multiple PCI-1710U/HGU/UL cards have been installed

on the same PC chassis. The BoardID setting function is very useful when

building a system with multiple PCI-1710U cards. With the correct Boar-

dID settings, you can easily identify and access each card during hard-

ware configuration and software programming.

1.2 Applications

• Transducer and sensor measurements

• Waveform acquisition and analysis

• Process control and monitoring

• Vibration and transient analysis

Note: For detailed specifications of the

1710U/HGU/UL, please refer to Appendix A.

5 Chapter 1

1.3 Installation Guide

Before you install your PCI-1710U/HGU/UL card, please make sure you

have the following necessary components:

• PCI-1710U/HGU/UL DA&C card

• PCI-1710U/HGU/UL User Manual

• Driver software Advantech DLL drivers (included in the companion

CD-ROM)

• Personal computer or workstation with a PCI-bus slot (running Win-

dows XP/Vista/7)

• PCL-10168 Wiring cable (optional)

• ADAM-3968, PCLD-8710 Wiring board (optional)

Other optional components are also available for enhanced operation:

• ActiveDAQ Pro, LabView or other 3rd-party software

After you get the necessary components and maybe some of the accesso-

ries for enhanced operation of your multifunction card, you can then

begin the installation procedure. Figure 1.1 on the next page provides a

concise flow chart to give users a broad picture of the software and hard-

ware installation procedures:

PCI-1710U Series User Manual 6

Figure 1.1: Installation Flow Chart

7 Chapter 1

1.4 Software Overview

Advantech offers a rich set of DLL drivers, third-party driver support and

application software to help fully exploit the functions of your

PCI-1710U/HGU/UL card:

• Device Drivers (on the companion CD-ROM)

• LabVIEW driver

• Advantech ActiveDAQ Pro

• WaveScan

Programming choices for DA&C cards

You may use Advantech application software such as Advantech Device

Drivers. On the other hand, advanced users can use register-level pro-

gramming, although this is not recommended due to its laborious and

time-consuming nature.

Device Drivers

Advantech Device Driver software is included on the companion CD-

ROM at no extra charge. It also comes with all Advantech DA&C cards.

Advantech’s Device Drivers features a complete I/O function library to

help boost your application performance. Advantech Device Drivers for

Windows XP/Vista/7 works seamlessly with development tools such as

Visual Studio .Net, Visual C++, Visual Basic, Borland C++ Builder and

Borland Delphi.

who find it necessary to write code directly at the level of the device reg-

ister. Since register-lev ch effort and time, we el programming requires mu

recommend that you use the Advantech Device Drivers instead. How-

ever, if register-level programming is indispensable, you should refer to

the relevant information in Appendix C, Register Structure and Format,

or to the example codes included on the companion CD-ROM.

PCI-1710U Series User Manual 8

1.5 Device Driver Programming Roadmap

This section will provide you a roadmap to demonstrate how to build an

application from scratch using Advantech Device Drivers with your

favorite development tools such as Visual Studio.Net, Visual C++, Visual

Basic, Delphi and C++ Builder. The step-by-step instructions on how to

build your own applications using each development tool will be given in

the Device Drivers Manual. Moreover, a rich set of example source code

is also given for your reference.

Programming Tools

Programmers can develop application programs with their favorite devel-

opment tools:

• Visual Studio .Net

• Visual C++ and Visual Basic

• Delphi

• C++ Builder

For instructions on how to begin programming works in each develop-

ment tool, Advantech offers a Tutorial Chapter in the Device Drivers

Manual for your reference. Please refer to the corresponding sections in

this chapter on the Device Drivers Manual to begin your programming

efforts. You can also look at the example source code provided for each

programming tool, since they can get you very well oriented.

The Device Drivers Manual can be found on the companion CD-ROM.

Alternatively, if you have already installed the Device Drivers on your

system, The Device Drivers Manual can be readily accessed through the

Start button:

Start/Programs/Advantech Automation/Device Manager/

Device Drivers Manual

The example source code could be found under the corresponding instal-

lation folder such as the default installation path:

\Program Files\Advantech\ADSAPI\Examples

For information about using other function groups or other development

tools, please refer to the Creating Windows XP/Vista/7 Application with

Device Drivers chapter and the Function Overview chapter on the Device

Drivers Manual.

9 Chapter 1

Programming with Device Drivers Function Library

Advantech Device Drivers offer a rich function library that can be utilized

in various application programs. This function library consists of numer-

ous APIs that support many development tools, such as

Visual Studio .Net, Visual C++, Visual Basic, Delphi and C++ Builder.

According to their specific functions or services, APIs can be categorized

into several function groups:

• Analog Input Function Group

• Analog Output Function Group

• Digital Input/Output Function Group

• Counter Function Group

• Port Function Group (direct I/O)

• Event Function Group

For the usage and parameters of each function, please refer to the Func-

tion Overview chapter in the Device Drivers Manual.

Troubleshooting Device Drivers Error

Driver functions will return a status code when they are called to perform

a certain task for the application. When a function returns a code that is

not zero, it means the function has failed to perform its designated func-

tion. To troubleshoot the Device Drivers error, you can pass the error

code to DRV_GetErrorMessage function to return the error message.

Alternatively, you can refer to the Device Drivers Error Codes Appendix

in the Device Drivers Manual for a detailed listing of Error Codes, Error

IDs and Error Messages.

PCI-1710U Series User Manual 10

1.6 Accessories

Advantech offers a complete set of accessory products to support the

PCI-1710U/HGU/UL card. These accessories include:

Wiring Cables

PCL-10168

The PCL-10168 cable is a 68-pin SCSI shielded cable for

PCI-1710U/HGU/UL cards.

Wiring Boards

• ADAM-3968 68-pin DIN-rail SCSI Wiring Board

• PCLD-8710 DIN-rail Wiring Board w/ CJC

13 Chapter 2

2.2 Driver Installation

We recommend you install the driver before you install the PCI-1710U/

HGU/UL card into your system, since this will guarantee a smooth instal-

lation process.

The Advantech Device Drivers Setup program for the

PCI-1710U//HGU/UL card is included in the companion CD-ROM that

is shipped with your DA&C card package. Please follow the steps below

to install the driver software:

1. Insert the companion CD-ROM into your CD-ROM drive.

2. The Setup program will be launched automatically if you have the

autoplay function enabled on your system. When the Setup Pro-

gram is launched, you will see the following Setup Screen.

Note: Keep the anti-static bag for future use. You

might need the original bag to store the card if

you have to remove the card from a PC or trans-

port it elsewhere.

Note: If the autoplay function is not enabled on

your computer, use Windows Explorer or

Windows Run command to execute

autorun.exe on the companion CD-ROM.

15 Chapter 2

2.3 Hardware Installation

After the Device Drivers installation is completed you can install the PCI-

1710U/HGU/UL card into any PCI slot on your computer. However, it is

suggested that you refer to the computer’s user manual or related docu-

mentation if you have any doubts. Please follow the steps below to install

the card onto your system.

1. Turn off your computer and unplug the power cord and cables.

TURN OFF your computer before installing or removing any com-

ponents on the computer.

2. Remove the cover of your computer.

3. Remove the slot cover on the back panel of your computer.

4. Touch the metal part on the surface of your computer to neutralize

the static electricity that might be on your body.

5. Insert the PCI-1710U/HGU/UL card into a PCI slot. Hold the card

only by its edges and carefully align it with the slot. Insert the card

firmly into place. Use of excessive force must be avoided; other-

wise, the card might be damaged.

6. Fasten the bracket of the PCI card on the back panel rail of the

computer with screws.

7. Connect appropriate accessories (68-pin cable, wiring terminals,

etc. if necessary) to the PCI card.

8. Replace the cover of your computer chassis. Re-connect the cables

you removed in step 2.

9. Plug in the power cord and turn on the computer.

After your card is properly installed on your system, you can now config-

ure your device using the Advantech Device Manager Program that has

itself already been installed on your system during driver setup. A com-

plete device installation procedure should include device setup, configu-

ration and testing. The following sections will guide you through the

Setup, Configuration and Testing of your device.

Note: Make sure you have installed the

driver before you install the card

(please refer to chapter 2.2 Driver

Installation)

17 Chapter 2

Configuring the Device

3. Please click the Setup button to configure your device. On the

Device Setting dialog box (Fig. 2-4), you can configure the A/D

channels configuration either as 8 Differential or 16 Single-ended,

specify the D/A voltage reference either as External or Internal and

specify the voltage output range for the two D/A channels.

Figure 2.4: The Device Setting Dialog Box

4. After your card is properly installed and configured, you can click

the Test… button to test your hardware by using the testing utility

supplied.

Figure 2.5: The Test Utility Dialog Box

For more detailed information, please refer to Chapter 2 of the Device

Drivers Manual. You can also find rich examples on the CD-ROM to

speed up your programming.

CHAPTER

Signal Connections

This chapter provides useful informa-

tion about how to connect input and

output signals to the PCI-1710U cards

via the I/O connector..

Sections include:

• Overview

• BoardID Settings

• Signal Connections

• Field Wiring Considerations

PCI-1710U Series User Manual 20

Chapter 3 Signal Connections

3.1 Overview

Maintaining signal connections is one of the most important factors in

ensuring that your application system is sending and receiving data cor-

rectly. A good signal connection can avoid unnecessary and costly dam-

age to your PC and other hardware devices. This chapter provides useful

information about how to connect input and output signals to the PCI-

1710U cards via the I/O connector.

3.2 Switch and Jumper Settings

PCI-1710U cards have one switch for BoardID setting.

Figure 3.1: Connector and Switch Locations

BoardID settings are used to set a board’s unique identifier when multiple

identical cards are installed in the same system.

PCI-1710U cards have a built-in DIP switch (SW1), which is used to

define each card’s unique identifier. You can determine the unique identi-

fier in the register as shown in Table 3.1. If there are multiple identical

cards in the same chassis, the BoardID switch helps differentiate the

boards by identifying each card’s device number with the switch setting.

The BoardID switch’s unique identifier has been set to 0 at the factory.

21 Chapter 3

If you need to adjust it to other numbers, set SW1 by referring to DIP

switch settings below.

Default Setting is 0

Table 3.1: Board ID Setting (SW1)

SW1 Position 1 Position 2 Position 3 Position 4

BoardID ID3 ID2 ID1 ID0

0ON ON ON ON

1ON ON ON OFF

2ON ON OFF ON

3ON ON OFF OFF

4ON OFF ON ON

5ON OFF ON OFF

6ON OFF OFF ON

7ON OFF OFF OFF

8OFF ON ON ON

9OFF ON ON OFF

10 OFF ON OFF ON

11 OFF ON OFF OFF

12 OFF OFF ON ON

13 OFF OFF ON OFF

14 OFF OFF OFF ON

15 OFF OFF OFF OFF

PCI-1710U Series User Manual 22

3.3 Signal Connections

Pin Assignment

Figure 3-2 shows the pin assignments for the 68-pin I/O connector on the

PCI-1710U/HGU/UL.

Figure 3.2: I/O Connector Pin Assignments for the PCI-1710U Series

*Note: Pins 23~25 and pins 57~59 are not defined for PCI-1710UL

PCI-1710U Series User Manual 24

3.3.2 Analog Input Connections

PCI-1710U/HGU/UL supports either 16 single-ended or 8 differential

analog inputs.

Single-ended Channel Connections

Single-ended connections use only one signal wire per channel. The volt-

age on the line references to the common ground on the card. A signal

source without a local ground is called a "floating" source. It is fairly sim-

ple to connect a single ended channel to a floating signal source. A stan-

dard wiring diagram looks like this:

TRG_GATE DGND Input A/D External Trigger Gate. When TRG

_GATE is connected to +5 V, it will

enable the external trigger signal to

input. When TRG _GATE is connected

to DGND, it will disable the external

trigger signal to input.

EXT_TRG DGND Input A/D External Trigger. This pin is exter-

nal trigger signal input for the A/D con-

version. A low -to-high edge triggers

A/D conversion to start.

+12V DGND Output +12 VDC Source.

+5V DGND Output +5 VDC Source.

Table 3.2: I/O Connector Signal Descriptions

Signal Input

A.GNDA.GND

A.GND

To A/D

25 Chapter 3

Differential Channel Connections

Differential input connections use two signal wires per channel. The card

measures only the voltage difference between these two wires, the HI

wire and the LOW wire. If the signal source has no connection to ground,

it is called a "floating" source. A connection must exist between LOW

and ground to define a common reference point for floating signal

sources. To measure a floating sources connect the input channels as

shown below:

If the signal source has one side connected to a local ground, the signal

source ground and the PCI-1710U/HGU/UL ground will not be at exactly

the same voltage, as they are connected through the ground return of the

equipment and building wiring. The difference between the ground volt-

ages forms a common-mode voltage.

To avoid the ground loop noise effect caused by common-mode voltages,

connect the signal ground to the LOW input. Do not connect the LOW

input to the PCI-1710U/HGU/UL ground directly. In some cases you

may also need a wire connection between the PCI-1710U/HGU/UL

ground and the signal source ground for better grounding. The following

two diagrams show correct and incorrect connections for a differential

input with local ground:

HIGH

LOW

A.GND

Vin

PCI-1710U Series User Manual 26

Correct Connection

Incorrect Connection

Analog Output Connection

The PCI-1710U/HGU/UL provides two D/A output channels. You can

use the internal precision -5 V or -10 V reference to generate 0 to +5 V or

0 to +10 V D/A output. Use an external reference for other D/A output

ranges. The maximum reference input voltage is ±10 V and maximum

output scaling is ±10 V. Loading current for D/A outputs should not

exceed 5 mA.

HIGH

LOW

Vin

Vcm GND

Vin=Vs

Vcm

HIGH

LOW

GND

Vin

- Vin=Vs+Vcm

27 Chapter 3

Fig. 3-3 shows how to make analog output and external reference input

connections on the PCI-1710U/1710HGU.

Figure 3.3: Analog Output Connections

3.3.3 Digital Signal Connections

The PCI-1710U/HGU has 16 digital input and 16 digital output channels.

The digital I/O levels are TTL compatible. The following figure shows

connections to exchange digital signals with other TTL devices:

To receive an OPEN/SHORT signal from a switch or relay, add a pull-up

resistor to ensure that the input is held at a high level when the contacts

are open.

D.GND

TTL Devices

PCI-1710U Series User Manual 28

3.4 Field Wiring Considerations

When you use PCI-1710U cards to acquire data from outside, noises in

the environment might significantly affect the accuracy of your measure-

ments if due cautions are not taken. The following measures will be help-

ful to reduce possible interference running signal wires between signal

sources and the PCI-1710U card.

• The signal cables must be kept away from strong electromagnetic

sources such as power lines, large electric motors, circuit breakers or

welding machines, since they may cause strong electromagnetic inter-

ference. Keep the analog signal cables away from any video monitor,

since it can significantly affect a data acquisition system.

• If the cable travels through an area with significant electromagnetic

interference, you should adopt individually shielded, twisted-pair wires

as the analog input cable. This type of cable has its signal wires twisted

together and shielded with a metal mesh. The metal mesh should only

be connected to one point at the signal source ground.

• Avoid running the signal cables through any conduit that might have

power lines in it.

• If you have to place your signal cable parallel to a power line that has a

high voltage or high current running through it, try to keep a safe dis-

tance between them. Alternatively, you can place the signal cable at a

right angle to the power line to minimize the undesirable effect.

• The signals transmitted on the cable will be directly affected by the

quality of the cable. In order to ensure better signal quality, we recom-

mend that you use the PCL-10168 shielded cable.

+5V

4.7K

D.GND

PCI-1710U Series User Manual 30

Appendix A Specifications

A.1 Analog Input

Channels 16 single-ended or 8 differential or combination

Resolution 12-bit

FIFO Size 4k samples

PCI-1710U/UL

Max. Sampling

Rate

100 kS/s

PCI-1710HGU

Max. Sampling

Rate

Gain 0.5, 1 5, 10 50, 100 500, 1000

Speed 100 kS/s 35 kS/s 7 kS/s 770 S/s

Conversion Time 8 µs

Input Range and

Gain List for

PCI-1710U/UL

Gain 0.5 1 2 4 8

Unipolar N/A 0~10 0~5 0~2.5 0~1.25

Bipolar ±10 ± ±5 2.5 ±1.25 0.625±

Input Range and

Gain List for

PCI-1710HGU

Gain 0.5 1 5 10 50 100 500 1000

Unipolar N/A 0~10 N/A 0~1 N/A 0~0.1 N/A 0~0.01

Bipolar ±10 ± ± ±5 1 0.5 0.1± ±0.05 0.01± ±0.005

PCI-1710U/UL

Drift

Gain 0.5 1 2 4 8

Zero 15 ppm/°C

Span 25 ppm/°C

PCI-1710U/UL

Small Signal BW

for PGA

Gain 0.5 1 2 4 8

Bandwidth 1MHz 3.3MHz 3.3MHz 2.8MHz 1.8MHz

PCI-1710HGU

Drift

Gain 0.5 1 5 10 50 100 500 1000

Zero 20 ppm/°C 50 ppm/°C

Span 40 ppm/°C 100 ppm/°C

PCI-1710HGU

Small Signal BW

for PGA

Gain 0.5 1 10 100 1000

Bandwidth 0.8MHz 3.2MHz 3MHz 0.65MHz 0.065MHz

Max. Input Volt-

age*

Common

mode Volt-

age(V)

-11 -8 -6 -

3.8~4

6 8 11

Max. Input

Voltage(V)

-2~-

5.6~1

7.4~

10~1

10~7.

10~5.7

-10~2

Input Impedance 300 MΩ / 5pF

Trigger Mode Software, on-board programmable pacer or external

PCI-1710U Series User Manual 32

A.2 Analog Output

A.3 Digital Input

Channels 2 (PCI-1710U/1710HGU only)

Resolution 12-bit

Output Range Using Internal Reference 0 ~ +5V @ -5V

0 ~ +10V @ -10V

Using External Reference 0 ~ +xV @ -xV (-10 ≤ ≤ x

10)

Accuracy Relative ±0.5 LSB

Differential Non-linearity ±0.5 LSB (monotonic)

Gain Error Adjustable to zero

Slew Rate 10 V/s

Drift 40 ppm / °C

Driving Capability 3 mA

Update Rate Static update

Output Impedance 7.5 ohm max.

Setting Time 26s ( to ± 1/2 LSB of FSR )

Input Channels 16

Input Voltage Low 0.8V max.

High 2V min.

Input Load 10 kΩ pull-high resistor connect to 5 V

33 Appendix A

A.4 Digital Output

A.5 Counter/Timer

Output Channels 16

Output Voltage Low 0.8 V max.@ +8.0mA (sink)

High 2 V min.@ -0.4mA(source)

Counter chip 82C54 or equivalent

Channels 3 channels, 2 channels are permanently configured as

programmable pacers; 1 channel is free for user appli-

cation

Resolution 16-bit

Compatibility TTL level

Base Clock Channel 2: Takes input from output of channel 1

Channel 1: 10MHz

Channel 0: Internal 1MHz or external clock (10 MHz)

max Selected by software

Max. Input

Frequency

10MHz

Clock Input Low 0.8 V max.

High 2.0 V min.

Gate Input Low 0.8 V max.

High 2.0 V min.

Counter Output Low 0.5 V max.@+24 mA

High 2.4 V min.@-15 mA

PCI-1710U Series User Manual 34

A.6 General

I/O Connector Type 68-pin SCSI female

Dimensions 175 x 100 mm (6.9" x 3.9")

Power Consumption Typical +5 V @ 850 mA

Max. +5 V @ 1 A

Temperature Operating 0~60° C (32~140°F)

(refer to IEC 68-2-1,2)

Storage -20~ 70° C (-4~158°F)

Relative Humidity Operating 5~85%RH non-condensing

(refer to IEC 68-1,-2,-3)

Storage 5~95%RH non-condensing

(refer to IEC 68-1,-2,-3)

Certifications CE certified

35 Appendix A

Produkspesifikasjoner

Merke:	Advantech
Kategori:	Ikke kategorisert
Modell:	PCI-1710HGU-DE

Trenger du hjelp?

Hvis du trenger hjelp med Advantech PCI-1710HGU-DE still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Ikke kategorisert Advantech Manualer

Advantech MIO-5377RC7PX-Q8A1 Bruksanvisning

12 Februar 2025

Advantech RSB-3720WQ-ACA2E Bruksanvisning

11 Februar 2025

Advantech MIO-5377RC5-Q6A1 Bruksanvisning

11 Februar 2025

Advantech ARK-1124H-S6A3 Bruksanvisning

9 Februar 2025

Advantech MIC-711-OX4A1 Bruksanvisning

9 Februar 2025

Advantech UNO-148-B73BA Bruksanvisning

9 Februar 2025

Advantech ARK-1250L-U2A1 Bruksanvisning

9 Februar 2025

Advantech SOM-7533BCAC-S0A1 Bruksanvisning

9 Februar 2025

Advantech PCI-1720U Bruksanvisning

8 Januar 2025

Advantech ECU-1051TL Bruksanvisning

3 Januar 2025

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Daikin EKWCTRDI1V3 Bruksanvisning

10 April 2025

Act AC6015 Bruksanvisning

10 April 2025

BlueBuilt BBMA2M Bruksanvisning

10 April 2025

Act AC6020 Bruksanvisning

10 April 2025

Creality3D Ender-3 S1 Pro Bruksanvisning

10 April 2025

MOZA SR-P Bruksanvisning

10 April 2025

Soundstream VRN-64HBL Bruksanvisning

10 April 2025

Panasonic Lumix DMW-AC11 Bruksanvisning

10 April 2025

IFM E40581 Bruksanvisning

9 April 2025

Livn Bolt Bruksanvisning

9 April 2025