Artsound PM-2S01 Bruksanvisning

Artsound Mottaker PM-2S01

Les nedenfor 📖 manual på norsk for Artsound PM-2S01 (12 sider) i kategorien Mottaker. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/12
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
OPERATION MANUAL
PRE AMPLIFIER
PM-2S01
PUBLIC ADDRESS SYSTEM
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ... ... ............... ... ........... ... ............ ... ............... ... ............ ... .3
2. GENERAL DESCRIPTION . ............... ... ............... ... ........ ... ............... ... ............... ... 5
3. FEATURES ............... ... ............... ... ........ ... ............... ... ............... ... ............ ... .............5
4. NOMENCLATURE AND FUNCTIONS
4.1 Front Panel .......... ............ ... ............... ... ............... ... ............ ... ............... ... ............ ... 6
4.2 Rear Panel....... ... ............... ... ............ ... ............... ... ............... ... ............ ... ............... 7
5. APPLICATIONS ........... ... ............... ... ........... ... ............ ... ............... ... ............... ... ..... 8
6.SPECIFICATIONS . ............ ... ............... ... ............... .............. ... ............ ... ............... . 9
7.BLOCK DIAGRAM ............ ... ............... ... ........... ... ............ ... ............... ... ............ ... . 10
8.DIMENSIONAL DIAGRAM ........... ... ............... .............. ... ............ ... ............... ... .... 11
2
Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
When Installing the Unit
Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
Be sure to replace the unit's terminal cover after
connection completion. Because high voltage is
applied to the speaker terminals, never touch these
terminals to avoid electric shock.
Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a
gas pipe as a catastrophic disaster may result.
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down, causing personal injury and/or property
damage.
Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
Do not insert nor drop metallic objects or
flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric
shock.
1. SAFETY PRECAUTIONS
When the Unit is in Use
Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest artsound dealer. Make no
further attempt to operate the unit in this condition
as this may cause fire or electric shock.
If you detect smoke or a strange smell coming
from the unit.
If water or any metallic object gets into the unit
If the unit falls, or the unit case breaks
If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
If it is malfunctioning (no tone sounds.)
To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest artsound dealer.
3

Produkspesifikasjoner

Merke: Artsound
Kategori: Mottaker
Modell: PM-2S01

Trenger du hjelp?

Hvis du trenger hjelp med Artsound PM-2S01 still et spørsmål nedenfor, og andre brukere vil svare deg




Mottaker Artsound Manualer

Mottaker Manualer

Nyeste Mottaker Manualer