Atlona AT-OME-CS31-SA-HDBT Bruksanvisning
Les nedenfor 📖 manual på norsk for Atlona AT-OME-CS31-SA-HDBT (7 sider) i kategorien Bryter. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/7
1
Installation Guide
AT-OME-CS31-SA-HDBT
AV Presentation
and Collaboration System
AT-OME-CS31-SA-HDBT
The Atlona AT-OME-CS31-SA-HDBT is an AV presentation and collaboration system for
classrooms and conference rooms. It features AV switching of remote and local sources, a mixer
amplier, and USB hub.
The switcher has one HDBaseT® input supporting extension of HDMI, Ethernet, power, control,
and USB 2.0 data up to 330 feet (100 meters) as well as two HDMI® inputs. Sources connected
to these inputs, such as laptops, computers, and document cameras, are routed to the HDMI
output connected to a projector or display. The amplier of the OME-CS31-SA-HDBT delivers
either two channels of 25 watts or a single channel of 50 watts into 4 or 8 ohms. It features one
balanced stereo audio input and two unbalanced stereo audio inputs with independent level
control for each. A balanced stereo line level output allows the mixed signal to be passed to
an assistive listening system or separate amplier. The OME-CS31-SA-HDBT’s USB system
integrates a USB 2.0 host over HDBaseT with a local USB 3.0 host and connections for four
peripheral devices such as cameras, speakerphones, interactive displays, keyboards, mice, or
storage devices.
IMPORTANT: Visit https://www.atlona.com/product/at-ome-cs31-sa-hdbt for the latest
rmware updates and User Manual.
1 x AT-OME-CS31-SA-HDBT
1 x Envelope of mating connectors for all captive-screw connectors
1 x Surface mount brackets
4 x rubber feet
1 x 24 V / 5 A power supply
1 x AC cord
1 x Insert w/ QR code
Package Contents
2
Installation Guide
AT-OME-CS31-SA-HDBT
HDBaseT IN
1
2 3
5V FWINPUT
PWR LAN LINK
IN1
RL
MIC L/R L/R
IN2 IN3
HDMI I N HOST AUDI O INAT- OME-CS31-SA-HDBT
SWIT CH ER WIT H
AUDI O AMPLIFIER
1 LED Indicators
Displays the current state of the unit:
PWR - LED will be red while the unit
is booting and green when operating
normally.
LAN - LED will be green when connected
to a switch or other LAN device.
LINK - LED will be green when connected
to an HDBaseT transmitter.
IN1 IN2 IN3, , - LED will be green when set
to the current input.
2 INPUT
Press and release this button to cycle
between each of the available inputs.
3 HDBaseT IN
Connect a category cable from this port
to a compatible HDBaseT transmitter or
switcher.
4 HDMI IN
Connect an HDMI cable from each of
these ports to an HDMI source.
5 HOST
Connect a USB cable from this port to the
host USB device.
6 MIC
This port is for future use.
7 VOICE L/R
Connect the included 5-pin captive screw
connector from this port to a balanced
analog audio input.
8 L/R
Connect a music player, Bluetooth
™
receiver, or other unbalanced stereo
source to each of these 3.5 mm mini-
stereo ports.
9 5V
Provides +5 V USB power. Can be used
to attach Bluetooth
™ audio adapters or
powered USB hubs.
10 FW
This USB-C port is used to update the
rmware. Refer to the User Manual for
more information.
Front Panel Descriptions
1 3 6 7 92 4 5 8
10
3
Installation Guide
AT-OME-CS31-SA-HDBT
HDMI OUTHUBAUDI O OUTAMP OUTPA SENSERS-232T RI GGER I/OLAN
100V
70V
25V
CLASS 2 WIRI NG
T RI GGER R
RXP
1
2
1
2
TX
LRL
24V 5A
Rear Panel Descriptions
1 24V / 5A
Connect the included 24 V / 5 A power
supply from this port to an available AC
electrical outlet.
2 LAN
Connect an Ethernet cable from either of
these ports to the LAN. The other LAN
port can be used to connect an Ethernet
cable to a display or other device.
3 TRIGGER I/O
Connect the included double-stack 4-pin
connector to this port. This port consists
of two separate ports: TRIGGER I/O 1
(top) and (bottom).TRIGGER I/O 2
4 RS-232
Connect the included double-stack 3-pin
captive screw connector to this port.
This port consists of two separate ports:
RS-232 1 RS-232 2 (top) and (bottom).
5 TRIGGER (PA SENSE)
Connect the included 2-pin captive screw
connector to this port. Supports audio
mute with contact closure or PA sense so
announcements can be heard clearly.
6 GND/25V/75V/100V (PA SENSE)
Connect the included 4-pin captive screw
connector from this port to a PA speaker
system.
7 Potentiometer (PA SENSE)
Adjusts the trigger voltage sensitivity.
8 AMP OUT
Connect the included 4-pin captive screw
connector from this port to a pair of
program / stereo speakers. Supports 2 x
25 watts @ 4/8 ohms amplier (stereo or
dual mono) or 1 x 50 watts @ 4/8 ohms
(bridged).
9 AUDIO OUT
Connect the included 5-pin captive screw
connector from this port to an assistive
listening device or additional amplier.
10 HUB
Connect up to 4 USB devices to these
ports.
11 HDMI OUT
Connect an HDMI cable from this port to
a display.
981 3 6 7 112 4 5 10
Produkspesifikasjoner
| Merke: | Atlona |
| Kategori: | Bryter |
| Modell: | AT-OME-CS31-SA-HDBT |
Trenger du hjelp?
Hvis du trenger hjelp med Atlona AT-OME-CS31-SA-HDBT still et spørsmål nedenfor, og andre brukere vil svare deg
Bryter Atlona Manualer
19 Oktober 2024
19 Oktober 2024
19 Oktober 2024
19 Oktober 2024
19 Oktober 2024
Bryter Manualer
- Bryter D-Link
- Bryter Lancom
- Bryter TP Link
- Bryter Totolink
- Bryter Extron
- Bryter Lindy
- Bryter Digitus
- Bryter LevelOne
- Bryter CSL
- Bryter Smart-AVI
- Bryter Generac
- Bryter Dahua Technology
- Bryter Equip
- Bryter Speaka
- Bryter Alcatel
- Bryter Crestron
- Bryter PureLink
- Bryter Blustream
- Bryter WHALE
- Bryter Tenda
- Bryter Suevia
- Bryter ZyXEL
- Bryter Homematic IP
- Bryter Setti+
- Bryter Intellinet
- Bryter Kaiser
Nyeste Bryter Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
22 Oktober 2024