Bauhn ABGSS-1223 Bruksanvisning

Bauhn Høyttaler ABGSS-1223

Les nedenfor 📖 manual på norsk for Bauhn ABGSS-1223 (2 sider) i kategorien Høyttaler. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/2

Product Overview

Have you got everything?

Operation

A. Bluetooth® Gimbal Sele Stick

B. Remote Control

C. USB-C Cable

D. User Guide

E. Warranty Certicate

F. General Safety Warning

Front

Side

Connect To The Remote

• Slide the extendable pole out and push the remote

out from the remote holder.

• Press and hold the button on the remote until the

remote LED indicator starts ashing green.

• Turn on your smart phones Bluetooth® and select

‘ABGSS-1223’ from the list of found devices. Once

connected, the LED indicator will turn off. (The

remote will automatically turn off after 10 minutes if

not paired).

• Press and hold the button to turn the remote off.

The LED indicator will ash green then turn off.

Mounting Your Smart Phone

• Open the phone mount lever and extend the phone

mount until your smart phone can t in as illustrated.

• Slide your smart phone and the phone mount will

automatically tighten.

Gimbal Function

• Release the rotation ring lock.

• Once your smart phone is mounted onto the

product, press and hold the power button to turn

the gimbal function on. The gimbal LED indicator

light will ash green.

• Once gimbal function is turned on, it will

automatically enter stable mode; where your smart

phone will maintain a constant orientation even

when you move the product to a different angle.

• Slide the extendable pole out to the desired length

(up to 640mm).

• The gimbal stabiliser and the remote will

automatically connect with each other when

powered on.

• Press the button on the remote or the

power button on the gimbal to switch

between horizontal and vertical mode

• Press the button on the remote or the

power button twice on the gimbal to slowly

rotate your smart phone in a clockwise

direction.

• Press the button on the remote or the

power button three times on the gimbal to

slowly rotate your smart phone in a counter-

clockwise direction.

• Press any button on the remote or the power button

on the gimbal again to reset back to the original

position.

• Once nished, press and hold the power button on

the gimbal or the button on the remote to turn

the gimbal function off. Lock the rotation ring lock

securely before packing away.

A. Phone mount lever

B. Locking knob

C. Extendable pole

D. Remote holder

E. Handle/tripod legs

F. USB-C charging port

G. Gimbal LED indicator light

H. Power button

I. Rotation ring lock

J. Remote LED indicator light

K. button

L. button (clockwise rotation)

M. button (anti-clockwise

rotation)

N. button (horizontal/vertical

rotation)

O. Micro USB charging port

User Guide

Model: ABGSS-1223

Bluetooth® Gimbal Sele Stick

Remote

Horizontal

Vertical

Stable

mode

Enjoy using your product!

Well done, you made it.

Now sit back and relax... your product is

automatically covered by a 1-year warranty.

How nice!

Give us a call

What? You mean this User Guide didn’t have ALL the answers? Speak to us!

We’d love to help you get up and running as quickly as possible.

Call our on . After Sales Support 1300 002 534

Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST

Remote is not

working

• Check that the smart phone is paired with the remote.

• For Android devices, go to your camera settings and

set your volume key as the capture function.

• The remote control will automatically power off after 10

minutes of inactivity. Press and hold the button to

turn the remote on again.

• The gimbal stabiliser and remote will automatically

connect with each other when powered on. Ensure

both the gimbal stabiliser and the remote are within

close proximity of each other.

Gimbal

function not

working

• Ensure the rotation ring lock is released.

• Your smart phone may be too heavy for rotating

function.

• When motor is jammed, the gimbal will generate noise

and auto switch off to protect the motor.

Gimbal

stabilsier

calibration

• When your smart phone is not perfectly horizontal or

vertical with the gimbal sele stick, the gimbal requires

calibration.

Troubleshooting

Specications

Battery Li-ion 3.7V, 400mAh (gimbal)

Li-ion 3.7V, 70mAh (remote)

Charging input 5VDC, 0.5A

Bluetooth V4.0

Tripod height 60cm

Connection distance <10m

Dimensions 185 x 68 x 43mm (when folded)

Weight 208g

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth

SIG, Inc., and any use of such marks by Hands (IP) Holdings Pty Ltd is under license.

Other trademarks and trade names are those of their respective owners.

Charging (Gimbal)

• Connect the supplied USB-C cable to the USB-C charging port on the product

and the other end to a power supply. The gimbal LED indicator light will light up

red during charging. Once fully charged, the indicator light will turn off. When the

battery is low, the gimbal LED indicator light will ash red. Please charge before use.

Charging (Remote)

• Connect a Micro USB cable (not included) to the Micro USB charging port on the

remote. The remote LED indicator light will light up red during charging. Once fully

charged, the indicator light will turn off.

• Note: the remote has a small power consumption. It is recommended to not charge

the remote frequently.

Gimbal Stabiliser Calibration

• When your smart phone is not perfectly horizontal or vertical with the product, the

gimbal requires calibration.

• Place the gimbal sele stick on a horizontal surface, with the power button on the

gimbal facing up.

• Turn on the gimbal function, and press the power button 6 times to enter

calibration mode. The gimbal will freely rotate. Press the power button again to

start calibration, the gimbal LED indicator will ash green rapidly.Do not move the

gimbal sele stick during calibration. After approximately 5 seconds, it will auto exit

calibration mode.

• The gimbal stabiliser calibration is now completed.

Taking Pictures/Videos Through The Remote

• Press the button on the remote to take a photo or video. The LED indicator will

ash green once.

• To set up for use as a tripod, push out the 3 tripod legs on the bottom of the

handle.

• Once nished, ensure to power off the remote by pressing and holding the

button, the LED indicator will ash green then turn off.

• Note: for android devices , go to your camera settings and set your volume key as

the capture function.

Produkspesifikasjoner

Merke:	Bauhn
Kategori:	Høyttaler
Modell:	ABGSS-1223

Trenger du hjelp?

Hvis du trenger hjelp med Bauhn ABGSS-1223 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Høyttaler Bauhn Manualer

Bauhn ABGSS-1223 Bruksanvisning

4 Januar 2025

Høyttaler Manualer

Nyeste Høyttaler Manualer

JBL Tower X Marine MT10HLW Bruksanvisning

6 Januar 2025

Logilink UA0389 Bruksanvisning

6 Januar 2025

Renkforce RF-ENC-200 Bruksanvisning

6 Januar 2025

Audibax Denver 12 Bruksanvisning

6 Januar 2025

Audibax CM508L-BT Bruksanvisning

6 Januar 2025

Audibax Freeport 212P Bruksanvisning

6 Januar 2025

Audibax Drop 6 Bruksanvisning

6 Januar 2025

Audibax Denver 6 Bruksanvisning

6 Januar 2025

Audibax CM608L-BT Bruksanvisning

6 Januar 2025

Audibax GA05-T Bruksanvisning

6 Januar 2025