Baumatic BDI1485D4E/1-80 Bruksanvisning (43 Sider)

INSTRUCTION MANUAL

BDI1485D4E

Washer Dryer

2

3

EN

Thank you for choosing this product.

We are proud to offer the ideal product for

you and the best complete range of home

appliances for your daily routine.

Carefully read this manual for correct and

safe appliance use and for helpful tips on

efficient maintenance.

Only use the washing

machine after

carefully reading these instructions. We

recommend you always keep this manual on

hand and in good condition for any future

owners.

Each product is identified by a unique 16-

character code, also called the “serial

number”, printed on the sticker. This can be

found inside the door opening. This code is

a unique code for your product that you will

need to

register the product warranty, or if

you need to contact the Customer Service

Centre.

This appliance is marked according to

the European directive 2012/19/EU

on Waste Electrical and Electronic

Equipment (WEEE).

WEEE contains both polluting substances (which

can cause negative consequences for the

environment) and basic components (which can

be re

-

used). It is important to have WEEE

subjected to specific treatments, in order to

remove and dispose properly all pollutants, and

recover and recycle all materials. Individuals can

play an important role in ensuring that WEEE

does not become an environmental issue; it is

essential to follow some basic rules:



WEEE should not be treated as household

waste;



WEEE should be handed over to the relevant

collection points managed by the municipality or

by registered companies. In many countries, for

large WEEE, home collection could be present.

In many countries, when you buy a new

appliance, the old one may be returned to the

retailer who has to collect it free of charge on a

one

-to-

one basis, as long as the equipment is of

equivalent type and has the same functions as

the supplied equipment.

1.

GENERAL SAFETY RULES

2.

INSTALLATION

3.

DETERGENT DRAWER

4.

PRACTICAL HINTS

5.

CLEANING AND MAINTENANCE

6.

QUICK USER GUIDE

7.

CONTROLS AND PROGRAMS

8.

DRYING CYCLE

9.

AUTOMATIC WASHING/DRYING CYCLE

10.

TROUBLESHOOTING AND WARRANTY

Contents

Environmental conditions

FOR U.K. ONLY

On receipt of your appliance please

check it carefully for damage. Any

damage found must be reported

to the

delivery driver immediately.

Alternatively

damage found must be

reported to the retailer within 2 days of

receipt.

4

1. GENERAL SAFETY

RULES

 This appliance is intended to

be used in household and

similar applications such as:

- Staff kitchen areas in shops, offices

and other working environments;

- Farm houses;

- By clients in hotels, motels and

other residential type environments;

- Bed and breakfast type environments.

A different use of this appliance

from household environment

or from typical housekeeping

functions, as commercial use by

expert or trained users, is excluded

even in the above applications. If

the appliance is used in a manner

inconsistent with this it may reduce

the life of the appliance and may

void the manufacturer’s warranty.

Any damage to the appliance or

other damage or loss arising

through use that is not consistent

with domestic or household use

(even if located in a domestic or

household environment) shall not

be accepted by the manufacturer to

the fullest extent permitted by law.

 This appliance can be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand the

hazards involved.

Children shall not play with the

appliance. Cleaning and user

maintenance shall not be made

by children without supervision.

 Children should be supervised

to ensure that they do not play

with the appliance.

 Children of less than 3 years

should be kept away unless

continuously supervised.



If the supply cord is damaged, it

must be replaced by a special

cord or assembly available from

the manufacturer or its service

agent.



Only use the hose-sets

supplied with the appliance for

the water supply connection

(do not reuse old hose-sets).



Water pressure must be between

0.05 MPa and 0.8 MPa.



Make sure carpets or rugs do

not obstruct the base or any of

the ventilation openings.

 The final part of a washer dryer

cycle occurs without heat (cool

down cycle) to ensure that the

items are left at a temperature

that ensures that the items will

not be damaged.

5

EN



After installation, the appliance

must be positioned so that the

plug is accessible.

 The appliance must not be

installed behind a lockable

door, a sliding door or a door

with a hinge on the opposite

side to that of the washer

dryer, in such way that a full

opening of the washer dryer

door is restricted.

 The maximum load capacity of

dry clothes depends on the

model used (see control panel).

 The appliance is not to be used

if industrial chemicals have

been used for cleaning.

 Do not dry unwashed items in

the washer dryer.



Items that have been soiled with

substances such as cooking oil,

acetone, alcohol, petrol, kerosene,

spot removers, turpentine, waxes

and wax removers should be

washed in hot water with an extra

amount of detergent before being

dried in the washer dryer.

 Items such as foam rubber

(latex foam), shower caps,

waterproof textiles, rubber

backed articles and clothes or

pillows fitted with foam rubber

pads should not be dried in the

washer dryer.

 Fabric softeners, or similar

products, should be used as

specified by the fabric softener

instructions.

 Oil-affected items can ignite

spontaneously, especially when

exposed to heat sources such

as a washer dryer. The items

become warm, causing an

oxidation reaction in the oil,

Oxidation creates heat. If the

heat cannot escape, items can

become hot enough to catch

fire. Piling, stacking or storing

oil-effected items can prevent

heat from escaping and so

create a fire hazard.

 If it is unavoidable that fabrics

contain vegetable or cooking

oil or have been contaminated

by hair care products be

placed in a washer dryer they

should first be washed in hot

water with extra detergent -

this will reduce, but not

eliminate, the hazard.



Remove all objects from pockets

such as lighters and matches.

WARNING:

never stop a washer dryer before

the end of the drying cycle

unless all items are quickly

removed and spread out so that

the heat is dissipated.

6



To consult the product technical

specification please refer to the

manufacturer website.

 The technical details (supply

voltage and power input) are

indicated on the product rating

plate

 Make sure that the electrical

system is earthed, complies

with all applicable law and that

the (electricity) socket is

compatible with the plug of the

appliance. Otherwise, seek

qualified professional assistance.

 The use of converters, multiple

sockets or extension cords is

strongly advised against

 Before cleaning or maintaining

the washing machine, unplug

the appliance and turn off the

water tap.

 Do not pull on the power cord

or appliance to unplug the

machine.

 Make sure there is no water in

the drum before opening the

door.

 Do not expose the washing

machine to rain, direct sunlight

or other weather elements.

Protect from possible freezing.

 When moving, do not lift the

washing machine by the knobs

or detergent drawer; during

transport, never rest the door on

the trolley. We recommend two

people lift the washing machine.

 In the event of fault and/or

malfunction, turn off the

washing machine, close the

water tap and do not tamper

with the appliance.

Immediately contact the

Customer Service Centre and

only use original spare parts.

Failure to observe these

instruction may jeopardise

appliance safety.

WARNING:

water may reach very high

temperatures during the

wash cycle.

WARNING:

the appliance must not be

supplied through an external

switching device, such as a

timer, or connected to a circuit

that is regularly switched on

and off by a utility.

Electrical connections and

safety instructions

7

EN

2. INSTALLATION



Remove the

2

or

4

transportation

screws

(A)

on the back and

remove the

2

or

4

flat washers,

rubber bungs and plastic spacer

tubes

(B)

as illustrated

in figure 1

.



If the washing machine is

built

-

in

, unscrew the

3

or

4

transportation screws

(A)

and

remove the

3

or

4

flat washers,

rubber bungs and plastic spacer

tubes

(B)

.



During the removal of the screws

occasionally spacer tubes fall

inside the product, these can be

remove

by tilting the product forward

and recovering them from the floor

or inside the base of the machine.



Cover the open transportation screw

holes with the

2

or

4

plastic caps

included in the instruction bag.

WARNING:

keep packaging materials

away from children.

8



Position the template onto the

reverse of the furniture door. It

is possible

to mount the hinges

and closure magnet on the right

or left-hand sid

e depending on

your requirements. Mark the

screw hole positions, then drill

out these positions.



Fix lace the hinges in p

with the

4 screws provided . (A)



Fix the magnet (B)

in place

using screw . (C)



Mount the plate (D)

on the right

or left-

hand side, depending on

your installation requirements

.

Place the plastic support

(E)

under the plate and fix it

in

position with screw (F).



Snap mount cap (G)

in the

lower position.

Instructions for mounting the

furniture door

11

EN



The washing machine should be installed in

its final position such that the water fill hose

is not kinked or trapped. The corrugated

drain hose should be inserted into suitable

drain pipe of between 50 cm and 85 cm

heig

ht above the floor using the curved drain

hose support. If an under sink connection is

used the drain hose must be routed above

the sink overfill opening to prevent back

siphoning. Care must be taken to avoid

kinking or trapping the drain hose

(fig. 7)

.



Level the appliance using the feet as

illustrated in figure 8:

a.

turn the nut clockwise to release the

screw;

b.

rotate the foot to raise or lower it until it

touches to the floor;

c.

lock the foot, screwing in the nut, until it

tightens against to the bottom of the

washing machine.



Plug in the appliance.

*

ACCESSORY SOLD SEPARATELY

WARNING:

contact the Customer Service Centre

should the power cord need

replacement.

Installation faults are not covered

by

the manufacturers warranty.

Setting

12

3. DETERGENT DRAWER

The detergent draw is split into 3

compartments as illustrated in figure 9:

 compartment "1": for prewash detergent;

 compartment “ ”: for special additives,

softeners, starch fragrances, etc.;

 compartment "2": for washing

detergent.

WARNING:

some detergents are not designed for

use in the dispenser drawer but are

supplied with their own dispenser that

is placed in the drum directly.

WARNING:

only use liquid products; the washing

machine is set to automatically dose

additives at each cycle during the last

rinse.

13

EN

4. PRACTICAL HINTS

When sorting laundry, make sure:

- have eliminated metallic objects such as

hair clips, pins, coins, from laundry;

- to have buttoned pillow cases, closed zips,

tied loose belts and long robe ribbons;

- to have removed rollers, hooks or clips

from curtains;

- to have carefully read clothing washing

labels;

- to have removed any persistent stains

using specific detergents.



When washing rugs, bedcovers or other

heavy clothing, we recommend you avoid

the spinning cycle.



To wash wool, make sure the item can be

machine washed. Check the fabric label.



Leave the appliance’s door slightly open

between washes, to prevent possible bad

smells developing inside the machine.

Tips on how to save money and not

damage the environment when using your

appliance.

 Load the machine to the highest capacity

shown in the programme table for each

programme - this will allow you to SAVE

energy and water.

 Noise and residual laundry moisture are

affected by spin speed: a faster spin is

associated with greater noise and lower

residual moisture in the laundry.

 The most efficient programmes in terms

of combined use of water and energy are

usually the longer lasting ones with lower -

temperature.

Maximise the load size

 Achieve the best use of energy, water,

detergent and time by using the

recommended maximum load size.

Save up to 50% energy by washing a full

load instead of 2 half loads.

Do you need to pre- wash?

 For heavily soiled laundry only!

SAVE detergent, time, water and

between 5 to 15% energy consumption

by NOT selecting Prewash for slight to

normally soiled laundry.

Is a hot wash required?

 Pretreat stains with stain remover or soak

dried in stains in water before washing to

reduce the necessity of a hot wash

programme. Save energy by using a low

temperature wash programme.

Before using a drying programme

(WASHER-DRYERS)

 SAVE energy and time by selecting a

high spin speed to reduce the water

content in laundry before using a drying

programme.

Below is a short guide with tips and advice

on the use of detergent.

 Only use detergents suitable for machine

washing.

 Select your detergent according to the

type of fabric (cotton, delicates,

synthetics, wool, silk, etc.), the colour, the

type and level of soiling and the

programmed washing temperature.

 To use the right amount of detergent,

softener or any other additives, carefully

follow the manufacturer’s instructions

every time: correctly using the

appliance with the right dose allows

you to avoid waste and to reduce the

environmental impact.

Dosing the detergent

Useful advice for saving

Load tips

14

 Too much detergent leads to excessive

foam, which prevents the cycle being

carried out correctly. It could also affect

the quality of the washing and rinsing.

The use of ecological detergents without

phosphates may cause the following

effects:

- cloudier rinse drain water: This effect is

tied to the suspended zeolites which do

not have negative effects on rinse

efficiency.

- white powder (zeolites) on laundry at

the end of the wash: this is normal, the

powder is not absorbed by fabric and does

not change its colour.

To remove the zeolites, select a rinse

programme. In the future consider using

slightly less detergent.

- foam in the water at last rinse: this does

not necessary indicate poor rinsing.

Consider using less detergent in future

washes.

- abundant foam: This is often due to the

anionic surfactants found in the detergents

which are hard to eliminate from laundry.

- In this case, do not re rinse to eliminate

these effects: it will not help at all.

We suggest conducting a maintenance

wash using a proprietary cleaner.

If the problem persists or if you suspect a

malfunction, immediately contact an

Authorised Customer Service Centre.

For washing , only use wool or silk

detergents specifically formulated for

these fabrics.

For washing at temperatures below

40°C we recommen

d the use of liquid

detergents or detergents specifically

labeled as suitable for low temperature

washing.

For washes between 40°C and 60°C

the type of detergent used needs to be

appropriate for the type of fabric and

level of soiling. Normal powders are

suitable for “white” or colour fast fabrics

with high soiling, while liquid detergents

or “colour protecting” powders are

suitable for coloured fabrics with light

levels of soiling.

When washing heavily soiled whites,

we recommend using cotton programs

of

60°C

or above and a normal washing

powder (heavy duty) that contains

bleaching agents that at medium/high

temperatures provide excellent results.

15

EN

5. CLEANING AND

MAINTENANCE

Looking after your appliance correctly can

extend its lifespan.

 Disconnect the machine from the power

supply.

 Clean the appliance’s external cabinet,

using a damp cloth and AVOIDING

ABRASIVES, ALCOHOL AND/OR

DILUENTS.

 It is advisable to regularly clean the

detergent drawer to avoid the

accumulation of detergent and additive

residues.

 Remove the drawer gently but firmly.

 Clean the drawer under running water

and put it back into its compartment.

 The appliance has a special filter that

traps larger residues that could block the

draining system, such as buttons or

coins.

We recommend checking and cleaning

the filter 5 or 6 times a year.

 Disconnect the machine from the power

supply.

 Ensure all the water has been emptied

from the drum.

 Before unscrewing the filter, we

recommend you place an absorbent cloth

under it to keep the floor dry. A small

amount of water will come out of the filter

as you remove it this is normal.-

 Turn the filter counter clockwise to the -

limit stop.

 Remove and clean the filter; when

finished, replace it turning it clockwise.

The filter handle will be locked when it is

not possible to turn any further and the

handle is horizontal. Smearing a small

amount of liquid soap on the filter seal will

help refitting.

 Repeat the previous steps in reverse

order to reassemble all parts.

 If the appliance is kept in a non-heated

room for long periods of time, all water

residues must be completely removed

from the pipes.

 Disconnect the machine from the power

supply socket.



Detach the tube from the drainage system

and clip on the rear of the machine and

lower it, fully draining water into a bowl.

 Secure the drain tube with the drainage

system and clip on the rear of the

machine when finished.

 Keep the door glass and gasket clean.

Suggestions for moves or

prolonged disuse

Cleaning the pump filter

Drawer cleaning

Cleaning the appliance’s exterior

16

6. QUICK USER GUIDE

This washing machine automatically adjusts

the level of the water to the type and

quantity of washing. This system gives a

reduction in energy consumption and a

saving in washing times.

 Turn on the washing machine and select

the required program.

 Adjust the washing temperature if

necessary and press the required "option"

buttons.

 Press the START/PAUSE button to start

washing.

 At the end of the programme, the

message "End" will appear on the display

or, on some models, all wash stage

indicator lights will turn on.

 Turn off the washing machine.

For any type of wash, see the program

table and follow the operating sequence

as indicated.

Water pressure:

min 0.05 Mpa / max 0.8 Mpa

(0.05 MPa dispenses approximately 1 litre

of water in 10 seconds)

Spin r.p.m.: See rating plate.

Power input / Power current fuse amp /

Supply voltage: See rating plate.

7. CONTROLS AND

PROGRAMS

A

Programme selector with OFF

position

B

START/PAUSE button

C

DELAY START button

D

DRYING SELECTION button

E

RAPID / STAIN LEVEL button

F

TEMPERATURE SELECTION

button

G

SPIN SPEED button

F+G

KEY LOCK

H

Digital display

I

DRYING SELECTION indicator

lights

L

DOOR LOCKED indicator light

M

KG LOAD indicator light

N

KEY LOCK indicator light

O

TEMPERATURE SELECTION

indicator lights

P

SPIN SPEED indicator lights

Technical data

Wait until the DOOR LOCKED light has

gone out before opening the door.

DRYING

If you would like the drying cycle to

begin automatically after washing,

select the programme required using

the DRYING SELECTION button.

Or you can finish the wash and then

select the drying programme and

load size.

Program selection

17

EN

 Press the button to start START/PAUSE

the selected cycle.

 Once a programme is selected the

programme selector remains stationary on

the selected programme till cycle ends.

 "End" will appear in the display at the

end of the program and the DOOR

LOCKED light will go off, it is now

possible to open the door.

 Switch off the washing machine by

turning the selector to OFF.

 Press to start the selected cycle.

PAUSING THE MACHINE

 Keep the ton pressed START/PAUSE but

for about seconds (some light indicators 2

and the residual time display will flash,

showing that the machine is paused).

 Press the START/PAUSE button again to

re-start the programme from the point it

had been paused at.

CANCELLING THE PROGRAMME

 To cancel the programme, set the

selector to the OFF position.

 Wait 2 minutes until the safety device

unlocks the door.

 This button allows you to pre-programme

the wash cycle to delay the start of the

cycle for up to 24 hours.

 To delay the start use the following

procedure:

- Select the required programme.

DELAY START button

For safety reasons, in some wash

cycle phases, the door can be opened

only if the level of the water is below

its lowe

r edge and if the temperature

is less than 45°C. If these conditions

are met, wait for the DOOR LOCKED

light to switch off before opening the

door.

When the START/PAUSE button has

been pressed, the appliance can take

few seconds before it starts working.

Close the door BEFORE selecting the

button START/PAUSE.

START/PAUSE button

The programme selector must be

returned to the OFF position at the end

of each cycle or when sta

rting a

subsequent wash cycle prior to the next

programme being selected and started.

When the programme selector is turned

the display lights up to show the settings

for the programme selected.

For energy saving, at the end of the

cycle or with an inactivity period, the

display level contrast will decrease.

N.B.: To switch the machine off, turn

the programme selector to the OFF

position.

PROGRAMME selector with OFF

position

19

EN

This button allows you to choose between

two different options, depending on the

selected programme.

- RAPID

The button becomes active when you

select the RAPID (14'- -30' 44') programme

on the knob and allows you to select one

of three durations indicated.

- STAIN LEVEL button

 Once the programme has been selected

the wash time set for that programme will

be automatically shown.

 This option allows you to choose between

3 levels of wash intensity modifying the

length of the programme, depending on

how much the fabrics are soiled (can only

be used on some programmes as shown

in the table of programmes).

 This button allows you to change the

temperature of the wash cycles.

 It is not possible to raise the temperature

over the maximum allowed for the

programme, in order to protect the

fabrics.

 If you want carry out a cold wash all the

indicators must be off.

 By pressing this button, it is possible to

reduce the maximum speed, and if you

wish, the spin cycle can be cancelled.

 If the label does not indicate specific

information, it is possible to use the

maximum spin expected in the program.

 To reactivate the spin cycle press the

button until you reach the spin speed you

would like to set.

 It is possible to modify the spin speed

without pausing the machine.

 Pressing simultaneously the buttons

TEMPERATURE SELECTION and SPIN

SPEED for about 3 seconds, the

machine allows you to lock the keys. In

this way, you can avoid making

accidental or unwanted changes if a

button on the display is pressed

accidently during a cycle.

 The key lock can be simply cancelled by

pressing the two buttons simultaneously

a gain or turning off the appliance.

KEY LOCK

The machine is fitted with a special

electronic device, which prevents the

spin cycle should the load be

unbalanced. This reduces the noise

and vibration in the machine and so

prolongs the life of your machine.

An over dosing of detergent can

c

ause excessive foaming. If the

appliance detects the presence of

excessive foam, it may exclude the

spinning phase or extend the duration

of the program and increase water

consumption.

To prevent damage to the fabrics, it is

not possible to increase the speed

over the maximum allowed for the

programme.

SPIN SPEED button

TEMPERATURE SELECTION

button

RAPID / STAIN LEVEL button

20

The display’s indicator system allows you to

be constantly informed about the status of

the machine.

1)

DRYING SELECTION INDICATOR LIGHTS

The indicators display the degrees of

dryness that can be selected by the

relevant button:

EXTRA DRY

(suitable for towels, bathrobes and

bulky loads).

IRON DRY

(that leaves the laundry ready for

ironing).

CUPBOARD DRY

(for items that will be put away

without ironing).

2) CYCLE DURATION

 When a programme is selected the

display automatically shows the typical

cycle duration, which can vary,

depending on the options selected.

 During the initial filling phase of the cycle

the machine calculates the actual cycle

time needed based on the load size,

content and options selected. The real

time of the wash will then be displayed.

This time can recaulculate during the

wash depending on detergent levels and

load balancing.

3) DOOR LOCKED INDICATOR LIGHT

 The indicator light is illuminated when the

door is fully closed.

 When is pressed on START/PAUSE

the machine with the door closed, the

indicator will flash momentarily and then

illuminate.

 Wait until the DOOR LOCKED light has

gone out before opening the door.

4) Kg LOAD INDICATOR LIGHT

(function active only on certain

programmes)

 During the first minutes of the cycle, the

"Kg LOAD" indicator will remain on while

the intelligent sensor will weigh the

laundry and adjust the cycle time, water

and electricity consumption accordingly.



Through every wash phase

"Kg LOAD"

allows to monitor information on the wash

load in the drum and in the first minutes of

the wash it:

- adjusts the amount of water required;

- determines the length of the wash cycle;

- controls rinsing according to the type of

fabric selected to be washed it;

If the door is not properly closed,

the light will continue to flash

for

about 7 seconds

, after which the

start command

will be automatically

cancelled. close In this case,

the

door in the proper way and

press

the START/PAUSE button.

Close the door BEFORE selecting the

START/PAUSE button.

Digital Display

22

PROGRAMME

(MAX.)

*

1)

(see control panel)

(MAX.)

2 1

Whites

2)

4)

6 6 7 8 8 9 10 10 90°

Cotton + Prewash

2)

4) 6 6 7 8 8 9 10 10 60°

ECO 40-60

2)

4)

6 6 7 8 8 9 10 10 60°

Wash and Dry

(ECO 40-60 + ) 4 5 5 5 6 6 6 7 -

20°C 2)

4)

6 6 7 8 8 9 10 10 20°

Mixed

2)

4)

3 3 3,5

4 4 4,5

5 5 60°

Delicates 2 2 2,5

2,5

40°

Rinse - - - - - - - - -

Spin - - - - - - - - -

Drain - - - - - - - - -

Rapid

3)4)

14'

1 1 1 1,5

1,5

30°

30'

2 2 2,5

2,5

30°

44'

3 3 3,5

3,5

40°

Shirts

2)

4)

3 3 3,5

4 4 4,5

5 5 30°

Wool 1 1 1 2 2 2 2 2 30°

Handwash 1 1 1 2 2 2 2 2 30°

Low Heat 3 3 3,5

4 4 4,5

5 5 -

High Heat 4 5 5 5 6 6 6 7 -

Table of programmes

Merke:	Baumatic
Kategori:	Vaskemaskin
Modell:	BDI1485D4E/1-80

Baumatic BDI1485D4E/1-80 Bruksanvisning

Produkspesifikasjoner

Trenger du hjelp?

Vaskemaskin Baumatic Manualer

Vaskemaskin Manualer

Nyeste Vaskemaskin Manualer