Brother RS-15 Bruksanvisning
Les nedenfor 📖 manual på norsk for Brother RS-15 (46 sider) i kategorien Symaskin. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/46
Operation Manual
1
IMPORTANT SAFETY INSTRUCTIONS
When using this machine, basic safety precautions, including the following, should always be taken:
Read all instructions before use.
DANGER - To reduce the risk of electric shock:
1. The machine should never be left unattended while plugged in. Always unplug the machine
from the electrical outlet immediately after using it and before cleaning it.
2. Always unplug the machine before you change the light bulb.
Replace the bulb with the same type and rated 15 watts.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Do not allow this machine to be used as a toy. Close attention is necessary when the machine is
used by or near children.
2. Use this machine only for its intended use as described in this manual. Use only accessories
recommended by the manufacturer as contained in this manual.
3. Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Return the machine to the nearest authorized
dealer or service center for examination, repair, or electrical or mechanical adjustment.
4. Never operate the machine with any air openings blocked. Keep ventilation openings of the
machine and foot controller free from the accumulation of lint, dust, and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8. To disconnect the machine, set the main switch to the “{” position (which represents off), and
then remove the plug from the outlet.
9. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle, causing it to break.
14. Switch the machine to the “{” position to turn it off when making any adjustments in the needle
area, such as threading the needle, changing the needle, threading the bobbin, or changing the
presser foot.
15. Always unplug the machine from the electrical outlet when removing covers, lubricating, or
when making any other user servicing adjustments mentioned in the instruction manual.
16. This sewing machine is not intended for use by young children or infirm persons without
supervision.
17. Young children should be supervised to ensure that they do not play with this machine.
SAVE THESE INSTRUCTIONS
This machine is intended for household use.
——————————————————————————————————————————————————————————
2
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY
If this machine is fitted with a three-pin non-rewireable BS plug then please read the following.
IMPORTANT (in the United Kingdom)
Main supply (AC 230/240V, 50Hz)
DO NOT cut off the main plug from the equipment. If the plug
fitted is not suitable for the power outlet in your home or the
cable is too short to reach a power outlet, then obtain an
appropriate safety-approved extension lead or consult your
dealer.
BE SURE to replace the fuse only with an identical approved
type, as originally fitted, and to replace the fuse cover.
If the main plug is cut off, be sure to remove the fuse and
dispose of the plug immediately, to avoid a possible shock
hazard by inadvertent connection to the main power supply.
IMPORTANT (in the other countries)
If the available socket outlet is not suitable for the plug
supplied with this equipment, it should be cut off and an
appropriate three-pin plug should be fitted. With alternative
plugs, an approved fuse must be fitted in the plug.
NOTE: The plug severed from the main leads must be
destroyed as a plug with bared flexible cords is hazardous if
engaged in a live socket outlet. In the event that the plug
fuse is replaced, use a fuse approved by ASTA to BS 1362,
i.e., carrying the mark, rated as marked on the plug.
Always replace the fuse cover. Never use plugs with the
fuse cover omitted.
WARNING: DO NOT CONNECT EITHER
WIRE TO THE EARTH TERMINAL WHICH IS
MARKED WITH THE LETTER ‘E’ OR BY THE
EARTH SYMBOL , OR COLORED GREEN
OR GREEN AND YELLOW.
The wires in this main lead are colored in accordance with
the following code:
Blue Neutral
Brown Live
As the colors of the wiring in the main lead of this
appliance may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows:
The wire that is colored blue must be connected to the
terminal marked with the letter ‘N’ or colored black or
blue.
The wire that is colored brown must be connected to the
terminal marked with the letter ‘L’ or colored red or brown.
CONNECTING PLUGS AND MAIN POWER/SEWING LIGHT SWITCH
1. Connect the three-prong plug into the machine.
2. Connect the electrical supply plug into a wall outlet.
• When leaving the machine unattended, the main
power switch of the machine should be switched off
or the plug must be removed from the socket outlet.
The main power/sewing light switch turns the main power
and sewing light on or off.
1Turn on
2Turn off
• When servicing the machine, removing covers or
changing bulbs, the machine must be unplugged.
1
2
Produkspesifikasjoner
| Merke: | Brother |
| Kategori: | Symaskin |
| Modell: | RS-15 |
Trenger du hjelp?
Hvis du trenger hjelp med Brother RS-15 still et spørsmål nedenfor, og andre brukere vil svare deg
Symaskin Brother Manualer
15 Desember 2024
15 Desember 2024
15 Desember 2024
15 Desember 2024
Symaskin Manualer
- Symaskin Husqvarna-Viking
- Symaskin Pfaff
- Symaskin Empisal
- Symaskin Bernina
- Symaskin Singer
- Symaskin Durkopp Adler
Nyeste Symaskin Manualer
27 Oktober 2024
27 Oktober 2024
22 Oktober 2024
22 Oktober 2024
22 Oktober 2024
22 Oktober 2024
22 Oktober 2024
22 Oktober 2024
20 Oktober 2024
20 Oktober 2024