Chief KITXWXSM1U Bruksanvisning
Chief
Flatpanelstøtte
KITXWXSM1U
Les nedenfor 📖 manual på norsk for Chief KITXWXSM1U (16 sider) i kategorien Flatpanelstøtte. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/16

I N S T A L L A T I O N I N S T R U C T I O N S
JUPITER PANA105 XX-LARGE
MICRO-ADJUST WALL MOUNT
KITXWXSM1U

KITXWXSM1U Installation Instructions
2
DISCLAIMER
Legrand AV and its affiliated corporations and subsidiaries
|
(collectively “Legrand AV”), intend to make this manual |
accurate and complete. However, Legrand AV makes no claim |
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand AV
|
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand AV
|
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.
DEFINITIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all parts are properly
assembled and installed using the instructions provided.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located on the KITXWXSM1U does not exceed
250 lbs (113.4 kg).
NOTE: The combined component weight limit remains 250 lbs
(113.4 kg) when using with the FCAXV1U Pull-Out
Accessory.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
IMPORTANT ! :
The KITXWXSM1U mount is designed to be
mounted to:
• a bare concrete wall with a minimum thickness of 8"
(203mm);
• a bare 8" x 8" x 16" (203mm x 203mm x 406mm)
concrete block wall; or
• wood studs spaced 24" or 32" (610mm or 813mm) on
center with a maximum drywall covering of 5/8".
NOTE: The
KITXWXSM1U
extra large height adjust mount
may be used with the UL Listed FCAVX1U Fusion pull-
out accessories.
--SAVE THESE INSTRUCTIONS--

Installation Instructions KITXWXSM1U
3
DIMENSIONS
DIMENSIONS: [INCHES]
MILLIMETERS
1. MAXIMUM MOUNTING PATTERN IS 74.2" (1885 mm) WITHOUT REVERSING UPRIGHTS
2. MAXIMUM MOUNTING PATTERN IS 76.9" (1954 mm) WITH REVERSING UPRIGHTS
3. FOR RECESSED APPLICATIONS, MINIMUM VERTICAL LIFT FOR HOOK ENGAGEMENT IS 0.75" (19 mm)
PIPE REINFOR CE ME NT
CO LL ARS
ANG LE
0°
A
DETA IL A
SCA LE 1 : 2
1°
B
DETA IL B
SC AL E 1 : 2
2°
C
DETAIL C
SC ALE 1 : 2
BACKWARDS ANGLE COMPENSATION SETTINGS
Produkspesifikasjoner
Merke: | Chief |
Kategori: | Flatpanelstøtte |
Modell: | KITXWXSM1U |
Trenger du hjelp?
Hvis du trenger hjelp med Chief KITXWXSM1U still et spørsmål nedenfor, og andre brukere vil svare deg
Flatpanelstøtte Chief Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

10 Mars 2025

18 Februar 2025

16 Januar 2025

16 Januar 2025

16 Januar 2025

16 Januar 2025
Flatpanelstøtte Manualer
- Flatpanelstøtte Schwaiger
- Flatpanelstøtte Nabo
- Flatpanelstøtte Sanus
- Flatpanelstøtte StarTech.com
- Flatpanelstøtte Kogan
- Flatpanelstøtte Newstar
- Flatpanelstøtte Gembird
- Flatpanelstøtte My Wall
- Flatpanelstøtte Digitus
- Flatpanelstøtte Kanto
- Flatpanelstøtte Dell
- Flatpanelstøtte B-tech
- Flatpanelstøtte Tripp Lite
- Flatpanelstøtte Blaupunkt
- Flatpanelstøtte Speaka
- Flatpanelstøtte Iiyama
- Flatpanelstøtte V7
- Flatpanelstøtte Helder
- Flatpanelstøtte Sven
- Flatpanelstøtte Manhattan
- Flatpanelstøtte Rocstor
- Flatpanelstøtte Mount-It!
- Flatpanelstøtte Proaim
- Flatpanelstøtte Premier Mounts
- Flatpanelstøtte CTA Digital
- Flatpanelstøtte Avteq
- Flatpanelstøtte Techly
- Flatpanelstøtte LC-Power
- Flatpanelstøtte Heckler
- Flatpanelstøtte Anywhere Cart
- Flatpanelstøtte GPX
- Flatpanelstøtte Vogels
- Flatpanelstøtte Peerless-AV
- Flatpanelstøtte Multibrackets
- Flatpanelstøtte Akai
- Flatpanelstøtte SunBriteTV
- Flatpanelstøtte Atdec
- Flatpanelstøtte Gabor
- Flatpanelstøtte NeoMounts
- Flatpanelstøtte Metronic
- Flatpanelstøtte Alogic
- Flatpanelstøtte Erard
- Flatpanelstøtte LTN Technologies
- Flatpanelstøtte XTRARM
- Flatpanelstøtte Ergotron
- Flatpanelstøtte Ateca
- Flatpanelstøtte ViewZ
Nyeste Flatpanelstøtte Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025