CRUX VRFFD-79C Bruksanvisning

Les nedenfor 📖 manual på norsk for CRUX VRFFD-79C (4 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/4
VRFFD-79C
Front + 1 Video Camera Integration Interface
for Select Ford Vehicles with 4” Sync 3 System
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
- Adds a front camera plus 1 extra video input.
- Uses the steering wheel control buons to toggle between the video sources. (except factory installed backup camera)
PRODUCT FEATURES:
PARTS INCLUDED:
VRFFD-79C Module VRFFD-79C Harness
OPTIONAL ADD-ON CAMERAS:
Oponal aermarket add on cameras are available for the VRFFD-79C. Cameras available and sold separately
include: (More cameras can be found at www.cruxinterfacing.com)
CFF-01 Bullet Type Front Camera CFF-02 Square Body Front Camera CFF-03 Grille Mount Front Camera
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
1 of 4 rev.021420
NOTE:
Vehicle MUST be equipped with a factory installed backup camera.
INSTALLATION DIAGRAM:
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
DIP SWITCH SETTINGS:
DIP# ON OFF
1No Funcon – Leave OFF
2 Front Camera ON Front Camera OFF
3 Set to OFF
4 Set to OFF
5 Video Input ON Video Input OFF
6 Set to OFF
7 Set to OFF
8 Set to ON
VRFFD-79C
Front + 1 Video Camera Integration Interface
for Select Ford Vehicles with 4” Sync 3 System
Front Camera Input
Video Input
Front Camera Power Output +12V (purple/white)
Video In Power Output +12V (orange/white)
To Vehicle Harness
This 6-pin plug MUST be connected
12 PIN
To Factory Screen
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
2 of 4 rev.021420
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
VRFFD-79C
Front + 1 Video Camera Integration Interface
for Select Ford Vehicles with 4” Sync 3 System
Sample VRFFD-79C module installaon on a 2017 Ford F 150:
1. Li the rubber mat on the dashboard upper tray and
remove the 2 screws.
2. Remove the tray and remove the 2 screws holding the
radio bezel.
3. Carefully pull out the radio bezel. This is held by mulple
clips.
4. Remove the factory screen, unplug the 12-pin connector
and plug it into the VRFFD-79C T-harness. Plug the other end
of the T-harness to the screen.
5. Install the camera and run the video and power cable
towards the radio. Make the video and power connecons.
The VRFFD-79C provides +12V power to the camera.
6. Plug the white, 18-pin connector of the T-harness to the
VRFFD-79C module. Set the DIP switches according to the
chart on page 2.
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
3 of 4 rev.021420

Produkspesifikasjoner

Merke: CRUX
Kategori: Ikke kategorisert
Modell: VRFFD-79C

Trenger du hjelp?

Hvis du trenger hjelp med CRUX VRFFD-79C still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert CRUX Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer