Custom P80C Bruksanvisning
Les nedenfor 📖 manual på norsk for Custom P80C (12 sider) i kategorien Printer. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/12
USER MANUAL
P80C
THE IMAGES USED IN THIS MAN-
UAL ARE AS USED AN - ILLUSTRA
TIVE EXAMPLES. THEY COULDN’T
REPRODUCE THE DESCRIBED
MODEL FAITHFULLY.
UNLESS OTHERWISE SPECIFIED,
THE INFORMATION GIVEN IN THIS
MANUAL
ARE REFERRED ALL TO MODELS
IN PRODUCTION AT THE ISSUE
DATE OF THIS DOCUMENT.
CUSTOM S.p.A.
Via Berettine 2/B
43010 Fontevivo (PARMA) - Italy
Tel. : +39 0521 680111-
Fax +39 0521 610701 : -
http: www.custom.biz
Customer Service Department:
www.custom4u.it
© 2023 CUSTOM – S.p.A. Italy.
All rights reserved. Total or partial reproduction of
this manual in whatever form, whether by printed
or - electronic means, is forbidden. While guaran
teeing that information contained has the in it been
carefully checked, CUSTOM S.p.A. and other
entities utilized in the realization of this manual
bear no responsibility for how the manual is used.
Information regarding any errors found in it or
suggestions on how it could be improved are
appreciated. Since products are subject to con-
tinuous check and improvement, CUSTOM S.p.A.
reserves the right to make changes in information
contained in this manual without prior notification.
The pre installed multimedia contents are pro- -
tected from Copyright CUSTOM S.p.A. Other
company and product names mentioned herein
may be trademarks of their respective companies.
Mention - of third party products is for informational
purposes only and constitutes neither an endorse-
ment nor a recommendation. CUSTOM S.p.A.
assumes no responsibility with regard to the
performance or use of these products.
GENERAL INSTRUCTIONS
CUSTOM S.p.A. declines all responsibility for
accidents or damage to persons or property
occurring as a result of tampering, structural or
functional modifications, unsuitable or incorrect
installations, environments not in keeping with
the equipment’s protection degree or with the
required temperature and humidity conditions,
failure to carry out maintenance and periodical
inspections and poor repair work.
GENERAL SAFETY INFORMATION
Your attention is drawn to the following actions
that could compromise the characteristics of the
product:
• Read and retain the instructions which follow.
• Follow all indications and instructions given
on the device.
• Make sure that the surface on which the device
rests If is stable. it is not, the device could fall,
seriously damaging it.
• Make sure that the device rests on a hard
(non-padded) surface and that there is suf-
ficient ventilation.
• Do - not fix indissolubly the device or its accesso
ries such as power supplies unless specifically
provided in this manual.
• When positioning the device, make sure cables
do not get damaged.
• [Only OEM equipment] The equipment must
be a installed in kiosk or system that provides
mechanical, electrical and fire protection.
• The mains power supply must comply with the
rules the Country where you intend in force in
to install the equipment.
• Make sure that there is an easily-accessible
outlet a with capacity of no less than 10 A closely
to where the device is to be installed.
• Make sure the power cable provided with the
appliance, or that you intend to use is suitable
with the wall socket available in the system.
• Make sure the electrical system that supplies
power to the device is a equipped with ground
wire and is protected by a differential switch.
• Before any type of work is done on the machine,
disconnect the power supply.
• Use the type of electrical power supply - indi
cated on the device label.
• These devices are intended to be powered
by a separately certified power module hav-
ing an SELV, non energy hazardous output.-
(IEC60950-1 second edition).
• [Only POS equipment] The energy to the
equipment must be provided by power supply
approved by CUSTOM S.p.A.
• Take care the operating temperature range of
equipment and its ancillary components.
• Do not block the ventilation openings.
• Do not insert objects inside the device as this
could cause short or - circuiting damage compo -
nents that could jeopardize printer functioning.
• Do not carry out repairs on the device yourself,
except for the normal maintenance operations
given in the user manual.
• The equipment must be accessible on these
components only to trained, authorized per-
sonnel.
• Periodically perform scheduled maintenance on
the device to avoid build up dirt - that could com -
promise the correct, safe operation of the unit.
• Do not touch the head heating line with bare
hands or metal objects. Do not perform any
operation inside the printer immediately after
printing because the head and motor tend to
become very hot.
• Remove jammed paper while switching off
the power.
• Please install the product away from the near
interferences.
• Use consumables approved by CUSTOM S.p.A.
THE CE MARK AFFIXED TO THE
PRODUCT CERTIFY THAT THE
PRODUCT SATISFIES THE BA-
SIC SAFETY REQUIREMENTS.
The device is in conformity with the essential
Electromagnetic Compatibility and Electric Safety
requirements laid down in Directives 2014/30/EU
and 2014/35/EU inasmuch as it was designed in
conformity with the provisions laid down in the
following Standards:
• EN 55032 (Electromagnetic compatibility of
multimedia equip Emission Requirement - -
ments)
• EN EN55024/EN55035 (Electromagnetic com -
patibility of multimedia equipment - Immunity
requirements)
• -1 EN IEC/EN62368 (Audio/video, information
and communication technology equipment)
The device is in conformity with the essential
requirements laid down in Directives 2014/53/EU
about devices equipped with intentional radiators.
The Declaration of Conformity and other available
certifications can be downloaded from the site
www.custom4u.it.
GUIDELINES FOR
THE DISPOSAL OF
THE PRODUCT
The crossed out rubbish bin logo means that -
used e electrical and lectronic products shall NOT
be mixed with unsorted municipal waste. For
more detailed information about recycling of this
product, refer to the instructions of your country
for the disposal of these products.
• Do not dispose of this equipment as miscel-
laneous solid municipal waste, but arrange to
have it collected separately.
• The - re use or correct recycling of electronic the
and electrical equipment (EEE) is important
in order to protect the environment and the
wellbeing of humans.
• In accordance with European Directive WEEE
2012/19/EU, special collection points are
available to which to deliver waste electrical
and electronic equipment and the equipment
can a also be handed over to distributor at the
moment of purchasing a new equivalent type.
• The public administration and producers of
electrical and electronic equipment are involved
in facilitating the processes of the re-use and
recovery of waste electrical and electronic
equipment through the organisation of col-
lection activities and the use of appropriate
planning arrangements.
• Unauthorised disposal of waste electrical and
electronic equipment is punishable by law with
the appropriate penalties.
• For - the waste sorting of the packaging materi
als, please check the local waste disposal laws.
The for manual improves natural reducing the quantity of format used this use of resources necessary paper to print this copy .
Produkspesifikasjoner
| Merke: | Custom |
| Kategori: | Printer |
| Modell: | P80C |
Trenger du hjelp?
Hvis du trenger hjelp med Custom P80C still et spørsmål nedenfor, og andre brukere vil svare deg
Printer Custom Manualer
16 Oktober 2024
16 Oktober 2024
Printer Manualer
- Printer Samsung
- Printer Kogan
- Printer CSL
- Printer Canon
- Printer Ricoh
- Printer Pantum
- Printer Xerox
- Printer Nisca
- Printer HiTi
- Printer Oce
Nyeste Printer Manualer
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024