DCS BND-CNR Bruksanvisning
Les nedenfor 📖 manual på norsk for DCS BND-CNR (2 sider) i kategorien Grille. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2
BNDCNR BEND CORNER BRACKET
INSTALLATION INSTRUCTIONS
Before you begin, read these instructions completely and carefully.
Getting Started
Remove packaging
CONTENTS
Eye Goggles
Screwdriver - Phillips #2
7/16” Socket and Ratchet Driver
7/16” Box or Open End Wrench
Description Qty
Bracket Top 1
Bracket Leg 2
Machine Screw #10-24 x 3/4” Phillips 4
Hex Nut 1/4-20 4
Washer 5/16 ID x 3/4 OD 4
Hex Bolt 1/4-20 x 3/4” 4
BND-CNR :
The BND-CNR is composed of three main pieces (one large 1.
bracket top and two bracket legs) that are held together using
four bolts and nuts. The bracket is mounted to the bend units
with four screws (Fig. 01).
Mounting of the BND-CNR bracket requires two CAD-BND 2.
bend units mounted with a CAD-30 cart between them and
any size CAD cart or refrigeration unit with wrapper on the
outer sides. When assembled, this conguration will provide
a solid base to which the BND-CNR bracket can be safely
mounted. The assembly should look similar to the image
below (Fig. 02).
Note: Before beginning installation, remove screws holding the rear of the center outdoor appli-
ance and cart to prevent damage (Fig. 03). Ensure the grill head is secured to the front of the
cart behind the drip pan.
Fig. 02
TOOLS NEEDED
Installation Instructions
Fig. 01
Fig. 03
Over. . .
CAD-BND CAD30 with
outdoor
appliance CAD-BND
Fisher & Paykel Appliances, Inc.
5900 Skylab Road, Huntington Beach, CA 92647
Customer Care: 888.281.5698 • Fax: 714.372.7003
www.dcsappliances.com P/N 242803 RA
Attach the legs to the backs of the bend units using the provided mounting screws (#10-24 x 1/2” Phillips 3.
Machine Screws). Position the legs on the bend units so that the screws are fed through the outer holes
on the bracket legs (Fig. 04).
Once the legs are securely mounted to the bend units, place the large 4. bracket top on top of the legs
(Fig. 05). The bracket top should rest safely on the legs while you secure the parts together.
Note: DO NOT place any weight on the shelf until step 5 is complete.
With the large 5. bracket top in place, secure the bracket top to the bracket legs using the hex bolt (1/4-20 x
3/4”), the washers (5/16 x 3/4 ) and hex nuts (1/4-20); bolt through the protruding plates on the legs, into
the bracket top (Fig. 05). Once secure, the solid surface can then be placed on the bend corner bracket.
Fig. 04 Fig. 05
ACCEssORiEs REQuiRED:
Solid Surface for Corner Shelf (BND-CNRT)
For alternate types and/or colors of solid surface, contact your local manufacturer and provide the attached
drawing (Fig. 06).
43.42”
.50”
ALL WALLS
R .250
ON ALL CORNERS
AND TOP EDGES
30.85”
90.00°
45.00°
C
L
SYMM
*1.30”
61.19”
*
DIMENSIONS ARE CRITICAL
Fig. 06
CAD-30
(center)
Bend Unit
Produkspesifikasjoner
| Merke: | DCS |
| Kategori: | Grille |
| Modell: | BND-CNR |
Trenger du hjelp?
Hvis du trenger hjelp med DCS BND-CNR still et spørsmål nedenfor, og andre brukere vil svare deg
Grille DCS Manualer
16 Oktober 2024
Grille Manualer
- Grille Severin
- Grille IKEA
- Grille Artusi
- Grille Roesle
- Grille Viking
- Grille Orbegozo
- Grille Grill Guru
- Grille Hendi
- Grille Livoo
- Grille XO
- Grille Fisher Paykel
- Grille Cuisinart
- Grille Blaze
- Grille Fisher And Paykel
- Grille Brentwood
- Grille Crossray
- Grille Kucht
- Grille BeefEater
- Grille EVO
- Grille Outdoorchef
- Grille Fieldmann
- Grille Mirpol
- Grille Yato
- Grille Lund
- Grille Maxxus
- Grille Enders
- Grille Brenner
- Grille Campart
- Grille Weber
- Grille La Hacienda
- Grille Sedona
- Grille Krampouz
- Grille Barbecook
- Grille Gasmate
- Grille Jamie Oliver
- Grille Char-Griller
- Grille Twin Eagles
Nyeste Grille Manualer
16 Januar 2025
16 Januar 2025
16 Januar 2025
16 Januar 2025
15 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
14 Januar 2025
9 Januar 2025