DeWalt DWE4559 Bruksanvisning
DeWalt
Slipemaskin
DWE4559
Les nedenfor 📖 manual på norsk for DeWalt DWE4559 (19 sider) i kategorien Slipemaskin. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/19
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ANTES ADVERTENCIA:
DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D WALT • www.dewalt.comE
DWX725
Heavy-Duty Work Stand
Établi industriel
Soporte de trabajo para trabajo pesado
English
DWX725 Heavy-Duty Work Stand
36" (920 mm)
D
C
E
AB
FIG. 1
Components List
A. Beam
B. Carry handle
C. Release button
D. Leg lock lever
E. Transport latch
1
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
E
WALT TOOL, CALL US TOLL FREE AT: 1-800-4-D WALT E
(1-800-433-9258)
WARNING: For your own safety, read the work stand
instruction manual before using any accessory. Failure
to heed these warnings may result in personal injury and
serious damage to the work stand and the accessory. When
servicing this tool, use only identical replacement parts.
General Safety Instructions for Work
Stand
WARNING: To reduce the risk of personal injury:
• ALWAYS use eye protection. All users and bystanders must
wear eye protection that conforms to ANSI Z87.1.
• ALWAYS check the stability of the miter saw stand and the miter
saw attached to it before putting the stand or the saw into use
• DO NOT exceed the weight this stand can hold. The main
center beam of the work stand is designed to support 1000lbs.
(453.6kg.) safely in a work environment. It is unsafe to climb, sit
or stand on the stand.
• DO NOT modify or use stand for operations for which it is
unintended.
• DO NOT use the stand on uneven surfaces. The stand is
designed to be used on a flat, stable surface.
• DO NOT use on a slippery surface. The stand load capacity is
greatly reduced when used on slippery surfaces.
Components (Fig. 1)
WARNING: Never modify the stand or any part of it. Damage or
personal injury could result.
Refer to Figure 1 for Components List.
C
D
FIG. 2
Preparation (Fig. 2)
1. Place the work stand on the ground with the folded legs facing
up.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, result in could death or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, result in may minor or moderate
injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, result in may property damage.
Produkspesifikasjoner
| Merke: | DeWalt |
| Kategori: | Slipemaskin |
| Modell: | DWE4559 |
Trenger du hjelp?
Hvis du trenger hjelp med DeWalt DWE4559 still et spørsmål nedenfor, og andre brukere vil svare deg
Slipemaskin DeWalt Manualer
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Slipemaskin Manualer
Nyeste Slipemaskin Manualer
22 Oktober 2024
20 Oktober 2024
16 Oktober 2024