DeWalt DWH053 Bruksanvisning

DeWalt Ikke kategorisert DWH053

Les nedenfor 📖 manual på norsk for DeWalt DWH053 (6 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/6

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

DWH053

Chipping Dust Extraction System

Système de dépoussiérage pour le burinage

Sistema de extracción de polvo de burilado

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE

GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE

USAR EL PRODUCTO.

DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286

The following are trademarks for one or more D WALT power tools: the yellow and black color scheme; the “D” shaped E

air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps

on the surface of the tool.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal

word. Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

NOTICE: indicates a practice which, not related to personal injury

if not avoided, result in may property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D WALT TOOL, E

CALL US TOLL FREE AT: 1-800-4-DEWALT (1-800-433-9258)

WARNING: To reduce the risk of injury, read all of this manual carefully before operating

the attachment. Also refer to the manual of any power tool that will be used with this

attachment.

General Safety Warnings

WARNING! Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

1) WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

c) Ensure the workplace is well ventilated. Exposure to dust at a poorly ventilated

workplace may result in damage to the health.

2) ELECTRICAL SAFETY

a) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is

earthed or grounded.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence

of drugs, alcohol or medication. A moment of inattention while operating power tools

may result in serious personal injury.

b) Protective Use personal protective equipment. Always wear eye protection.

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal injuries.

c) Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

d) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught

in moving parts.

4) POWER TOOL USE AND CARE

a) The Do not force the power tool. Use the correct power tool for your application.

correct power tool will do the job better and safer at the rate for which it was designed.

WARNING: The use of any accessory or attachment or performance of any operation

with this tool, other than those recommended in this instruction manual may present a risk

of personal injury.

b) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

c) Use the power tool, accessories and tool bits etc., in accordance with these

instructions taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could result

in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

Additional Specific Safety Rules for Dust Extraction

Systems

• Do not use the attachment for drilling applications.

• Use only power tools recommended by DEWALT with this attachment. For more information

about DEWALT power tools compatible with this attachment, please contact your local

dealer, call 1-800-4-DEWALT (1-800-433-9258) or visit our website www.dewalt.com.

• Do not use the tool in damp or wet conditions.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Use only as described in this manual. Use only manufacturer's recommended attachments.

• Do not put any object into openings. Do not use with any opening blocked; keep free of lint,

hair and anything that may reduce air flow.

• Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.

• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas

where they may be present.

• This appliance collects a significant percentage of, but not all, the dust generated.

WARNING: ALWAYS USE SAFETY GLASSES. Everyday eyeglasses are NOT safety

glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS wear certified safety

equipment:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3).

• ANSI S12.6 (S3.19) hearing protection.

• NIOSH/OSHA respiratory protection.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to the State of California to cause cancer, birth

defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To

reduce your exposure to these chemicals: work in a well ventilated area, and work with approved

safety equipment, such as those dust masks that are specially designed to filter out microscopic

particles.

• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,

and other construction activities. Wear protective clothing and wash exposed

areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin

may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and

permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection

appropriate for the dust exposure. Direct particles away from face and body.

WARNING: Before beginning the work, check to determine the hazard classification

of the dust produced. Use an industrial dust extractor vacuum of the appropriate

official approved safety class and in compliance with your local dust hazard control

regulations.

WARNING: Always wear proper personal hearing protection. Under some conditions

and duration of use, noise from this product may contribute to hearing loss.

COMPONENTS (FIG. 1)

WARNING: Never modify the power tool or any part of it. Damage or personal injury could

result.

A. Dust extraction system F. Dust shroud (medium)

B. Adaptor 1 G. Dust shroud (short)

C. Adaptor 2 H. Connection point

D. Adaptor 3 I. Latch

E. Dust shroud (long)

INTENDED USE

Your chipping dust extraction system has been designed for professional chipping and

chiselling applications in concrete and masonry. Using the appropriate hammer drill, chisel and

dust extractor vacuum it can be used to remove the vast majority of static and airborne dust

which without the use of the dust extraction system could otherwise contaminate the working

environment or pose an increased health risk to the operator and those in close proximity.

Recommended power tools to be used with this attachment are available at extra cost from

your local dealer or authorized service center. If you need assistance in locating any power tool,

please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call

1-800-4-DEWALT (1-800-433-9258) or visit our website www.dewalt.com.

DO NOT use under wet conditions or in presence of flammable liquids or gases.

The chipping dust extraction system is a professional tool.

DO NOT let children come into contact with the tool. Supervision is required when inexperienced

operators use this tool.

ASSEMBLY

WARNING: ALWAYS turn off tool and disconnect the tool from the power source

before making any adjustments or removing or installing attachments or accessories.

This applies to both the chipping tool and the dust extractor vacuum. Such preventative

safety measures reduce the risk of starting the tool accidentally.

NOTICE: The chisel must not extend more than 4.9" (125 mm) or less than 1.2" (30mm) from

the end of the dust extractor vacuum dust shroud for optimum performance, see figure 5.

NOTICE: Ensure the adaptor and all surfaces are free from oil and grease. The dust extractor

vacuum will not fit securely if parts are oily or greasy. Refer to paragraph. Cleaning

Attach Dust Extraction System (Fig. 1–5)

NOTE: Remove chisels or accessories from tool.

1. Select the correct dust shroud (E, F, G) depending on the length of the chisel (J, U) or

accessory to be used.

2. Fit the selected dust shroud (E, F, G) onto the dust extraction system (A). Pull the lugs (K) to

attach and release dust shroud.

3. Select the correct adaptor (B, C, D). Push the adaptor as far as it will go onto the tool

holder(L).

NOTE: To select the correct tool holder adaptor reference the information label on the inside

of the kit box lid.

4. Open the latch (I).

5. Slide the dust extraction system (A) over the adaptor as far as it will go.

NOTE: The dust extraction system has a limit stop, there should not be a gap between the

tool holder (L) and limit stop (M) as shown in inset.

6. Close latch (I) to secure dust extraction system in place.

7. Insert chisel (J, U) as instructed in the tool instruction manual.

NOTE: Ensure chisel is inserted through the round guide (S) in dust shroud as shown in

inset.

TO REMOVE POINT CHISEL (FIG. 6, 7)

1. Open latch (I).

2. Slide dust extraction system (A) from tool holder.

3. Remove point chisel (J) from tool holder as instructed in the tool instruction manual.

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-800-4-D WALT • www.dewalt.comE

TO REMOVE FLAT CHISEL (FIG. 8–11)

1. Pull adaptor (B, C, D) down as shown.

2. Remove flat chisel (U) from tool holder as instructed in the tool instruction manual.

2. Open latch (I) and slide dust extraction system (A) from tool holder.

3. Remove adaptor (B, C, D).

Attach Dust Extraction System To Dust Extractor Vacuum

(Fig. 1, 12, 13)

WARNING: Use only power tools recommended by D WALT with this attachment. For more E

information about DEWALT power tools compatible with this attachment, please contact your

local dealer, call 1-800-4-DEWALT (1-800-433-9258) or visit our website www.dewalt.com.

Push dust extractor vacuum hose nozzle (P) into connection point (H) until tight. For a more

secure connection use the AirLock connection system.

NOTE: Ensure hose connection is secure.

AIRLOCK CONNECTOR SYSTEM - DWV9000 (SOLD SEPARATELY)

AirLock allows for a fast and secure connection between the dust extraction system and the

dust extractor vacuum.

1. Ensure the collar (Q) on the AirLock connector (M) is in the unlock position. Align notches

(R) on collar and AirLock connector as shown for unlock and lock positions.

2. Push the AirLock connector (M) onto the connection point (H) of the dust extraction

system (A).

3. Rotate the collar (Q) to the locked position. The ball bearings (N) inside collar will lock NOTE:

into slot (O) and secure the connection.

The dust extraction system is now securely connected to the dust extractor vacuum.

OPERATION

WARNING: ALWAYS turn off tool and disconnect the tool from the power source

before making any adjustments or removing or installing attachments or accessories.

This applies to both the chipping tool and the dust extractor vacuum. Such preventative

safety measures reduce the risk of starting the tool accidentally.

WARNING: For your own safety, read the instruction manual for both the chipping tool and

the dust extractor vacuum before using any accessory. Failure to heed these warnings may

result in personal injury and serious damage to the tool and the accessory. When servicing this

tool, use only identical replacement parts.

CAUTION: DO NOT carry or guide the tool by the dust extractor vacuum. Hold the tool as

instructed in the tool instruction manual.

• Ensure latch is securely closed.

• Ensure rotary function is disabled and that the hammerdrill is set to chiselling/rotary stop

mode.

NOTE: The amount of dust retained by the dust extractor vacuum is dependent on its filter

system. Refer to the dust extractor vacuum instruction manual for more information.

1. Turn the dust extractor vacuum on as instructed in the dust extractor vacuum instruction

manual.

2. Switch on the hammerdrill as instructed in the tool instruction manual.

NOTE: The two larger dust shrouds have bellows (T, Fig. 14) to increase flexibility when

working in tight or confined spaces.

MAINTENANCE

WARNING: ALWAYS turn off tool and disconnect the tool from the power source

before making any adjustments or removing or installing attachments or accessories.

This applies to both the chipping tool and the dust extractor vacuum. Such preventative

safety measures reduce the risk of starting the tool accidentally..

Your chipping dust extraction system has been designed to operate over a long period of time

with a minimum of maintenance. Continuous satisfactory operation depends on proper tool care

and regular cleaning.

TROUBLESHOOTING

FAULT POSSIBLE CAUSE REMEDY

Excessive dust

emission

dust extractor vacuum is full empty the dust extractor vacuum

suction channel is blocked clean the suction channel

The chisel is extended more

than 4.9" (125 mm)

use a shorter chisel or a longer dust

shroud

Dust Extraction

System does not

attach to hammer

the dust extraction system is

not assembled correctly

Refer to Assembly section.

adaptor and tool holder are

oily or greasy

remove oil and grease with a clean cloth

the locking latch is damaged replace locking latch

wrong adaptor being used select the correct adaptor

Cleaning

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts

of the tool. These chemicals may weaken the plastic materials used in these parts. Use a cloth

dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse

any part of the tool into a liquid.

Accessories

WARNING: Since accessories, other than those offered by D WALT, have not been tested E

with this product, use of such accessories with this tool could be hazardous. To reduce the risk

of injury, only DEWALT recommended accessories should be used with this product.

If you need assistance, please contact DEWALT Industrial Tool Co., 701 East Joppa Road,

Baltimore, MD 21286, call 1-800-4-DEWALT (1-800-433-9258) or visit our website www.

dewalt.com.

Repairs

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustments should be

performed by a DE EWALT factory service center, a D WALT authorized service center or other

qualified service personnel. Always use identical replacement parts.

Three Year Limited Warranty

DEWALT will repair, without charge, any defects due to faulty materials or workmanship for

three years from the date of purchase. This warranty does not cover part failure due to normal

wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit

www.dewalt.com or call 1-800-4-DEWALT (1-800-433-9258). This warranty does not apply to

accessories or damage caused where repairs have been made or attempted by others. This

warranty gives you specific legal rights and you may have other rights which vary in certain

states or provinces.

In addition to the warranty, DEWALT tools are covered by our:

1 YEAR FREE SERVICE

DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time

during the first year after purchase.

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or

Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt

for a full refund – no questions asked.

LATIN AMERICA: This warranty does not apply to products sold in Latin America. For

products sold in Latin America, see country specific warranty information contained either in the

packaging, call the local company or see website for warranty information.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are

missing, call 1-800-4-DEWALT (1-800-433-9258) for a free replacement.

FIG. 1

FIG. 2

J, U

E, F, G

FIG. 3

B, C, D

FIG. 6 FIG. 7

FIG. 4 FIG. 5

J, U

4.9" (125 mm)

1.2" (30 mm)

Définitions: lignes directrices

en matière de sécurité

Les définitions ci-dessous décrivent le niveau de danger pour chaque mot-indicateur

employé. Lire le mode d’emploi et porter une attention particulière à ces symboles.

DANGER: indique une situation dangereuse imminente qui, si elle n’est pas évitée,

entraînera la mort ou des blessures graves

AVERTISSEMENT: indique une situation potentiellement dangereuse qui, si elle n’est

pas évitée, entraîner lapourrait mort ou des blessures graves

ATTENTION: indique une situation potentiellement dangereuse qui, si elle n’est pas

évitée, pourrait entraîner des blessures légères ou modérées.

AVIS: indique une pratique ne posant mais aucun risque de dommages corporels

qui par contre, si rien n’est fait pour l’éviter, poser des pourrait risques de dommages

matériels.

POUR TOUTE QUESTION OU REMARQUE AU SUJET DE CET OUTIL OU DE TOUT

AUTRE OUTIL DEWALT, COMPOSEZ LE NUMÉRO SANS FRAIS : 1-800-4-DEWALT

(1-800-433-9258).

B, C, D

FIG. 8 FIG. 9

FIG. 10 FIG. 11

FIG. 14

FIG. 12

FIG. 13

B, C, D

AVERTISSEMENT: pour réduire tout risque de dommages corporels, lire soigneusement

ce manuel avant toute utilisation de l’accessoire. Se reporter aussi au manuel de

l’utilisateur des outils électriques utilisés avec cet accessoire.

Consignes générales de sécurité

AVERTISSEMENT! Lire tous les avertissements de sécurité et toutes les

directives. Le non-respect des avertissements et des directives pourrait se solder par

un choc électrique, un incendie et/ou une blessure grave.

CONSERVER TOUS LES AVERTISSEMENTS ET TOUTES

LES DIRECTIVES POUR UN USAGE ULTÉRIEUR

1) SÉCURITÉ DU LIEU DE TRAVAIL

a) Tenir l’aire de travail propre et bien éclairée. Les lieux encombrés ou sombres sont

propices aux accidents.

b) Éloigner les enfants et les personnes à proximité pendant l’utilisation d’un outil

électrique. Une distraction pourrait en faire perdre la maîtrise à l’utilisateur.

c) S’assurer que les lieux de travail sont bien aérés. Toute exposition à la poussière sur

des lieux de travail mal aérés pose des risques à la santé.

2) SÉCURITÉ EN MATIÈRE D’ÉLECTRICITÉ

a) Éviter tout contact physique avec des surfaces mises à la terre comme des

tuyaux, des radiateurs, des cuisinières et des réfrigérateurs. Le risque de choc

électrique est plus élevé si votre corps est mis à la terre.

3) SÉCURITÉ PERSONNELLE

a) Être vigilant, surveiller le travail effectué et faire preuve de jugement lorsqu’un

outil électrique est utilisé. Ne pas utiliser d’outil électrique en cas de fatigue

ou sous l’influence de drogues, d’alcool ou de médicaments. Un simple moment

d’inattention en utilisant un outil électrique peut entraîner des blessures corporelles graves.

b) Utiliser des équipements de protection individuelle. Toujours porter une protection

oculaire. L’utilisation d’équipements de protection comme un masque antipoussière, des

chaussures antidérapantes, un casque de sécurité ou des protecteurs auditifs lorsque la

situation le requiert réduira les risques de blessures corporelles.

c) Ne pas trop tendre les bras. Conserver son équilibre en tout temps. Cela permet

de mieux maîtriser l’outil électrique dans les situations imprévues.

d) S’habiller de manière appropriée. Ne pas porter de vêtements amples ni de bijoux.

Garder les cheveux, les vêtements et les gants à l’écart des pièces mobiles. Les

vêtements amples, les bijoux ou les cheveux longs risquent de rester coincés dans les

pièces mobiles.

4) UTILISATION ET ENTRETIEN D’UN OUTIL ÉLECTRIQUE

a) Ne pas forcer un outil électrique. Utiliser l’outil électrique approprié à l’application.

L’outil électrique approprié effectuera un meilleur travail, de façon plus sûre et à la vitesse

pour laquelle il a été conçu.

AVERTISSEMENT: l’utilisation de tout accessoire ou pièce, ou l’exécution de toute

opération avec cet outil, autre que celle recommandée dans ce manuel de l’utilisateur

pose des risques de dommages corporels.

b) Ranger les outils électriques hors de la portée des enfants et ne permettre à

aucune personne n’étant pas familière avec un outil électrique ou son mode

d’emploi d’utiliser cet outil. Les outils électriques deviennent dangereux entre les mains

d’utilisateurs inexpérimentés.

c) Utiliser l’outil électrique, les accessoires, les forets, etc. conformément aux

présentes directives en tenant compte des conditions de travail et du travail

à effectuer. L’utilisation d’un outil électrique pour toute opération autre que celle pour

laquelle il a été conçu est dangereuse.

RÉPARATION

a) Faire réparer l’outil électrique par un réparateur professionnel en n’utilisant

que des pièces de rechange identiques. Cela permettra de maintenir une utilisation

sécuritaire de l’outil électrique.

Règles particulières additionnelles de sécurité propres

aux systèmes de dépoussiérage

• Ne pas utiliser cet accessoire pour des applications de perçage.

• Utiliser exclusivement les outils électriques recommandés par DEWALT avec cet accessoire.

Pour plus d’informations concernant les outils électriques DEWALT compatibles avec cet

accessoire, contacter votre détaillant local, appeler le 1-800-4-DEWALT (1-800-433-9258)

ou se rendre sur notre site www.dewalt.com.

• Ne pas utiliser l’outil dans un environnement humide ou détrempé.

• Ne jamais permettre qu’il soit utilisé comme un jouet. Rester très vigilant lorsque l’appareil est

utilisé par des enfants ou en leur présence.

• N’utiliser l’appareil que comme décrit dans ce manuel. Utiliser exclusivement des accessoires

recommandés par le fabricant.

• Ne pas insérer d’objet dans les ouvertures. Ne pas l’utiliser si les ouvertures sont bloquées.

Le maintenir propre et exempt de tout cheveu, peluche, ou toute autre chose pouvant en

réduire la circulation d’air.

• Maintenir les cheveux, les vêtements amples, les doigts, et toute autre partie du corps,

éloignés des ouvertures et des pièces mobiles.

• Ne pas l’utiliser pour aspirer des liquides inflammables ou combustibles comme l’essence ou

l’utiliser en leur présence.

• Cet appareil aspire un pourcentage considérable, mais pas la totalité de la poussière

générée.

AVERTISSEMENT : PORTER SYSTÉMATIQUEMENT DES LUNETTES

DE PROTECTION. Les lunettes courantes NE sont PAS des lunettes de protection.

Utiliser aussi un masque antipoussières si la découpe doit en produire beaucoup. Porter

SYSTÉMATIQUEMENT un équipement de sécurité homologué:

• Protection oculaire ANSI Z87.1 (CAN/CSA Z94.3);

• Protection auditive ANSI S12.6 (S3.19;

• Protection des voies respiratoires NIOSH/OSHA/MSHA.

AVERTISSEMENT : les scies, meules, ponceuses, perceuses ou autres outils de

construction peuvent produire des poussières contenant des produits chimiques reconnus par

l’État californien pour causer cancers, malformations congénitales ou être nocifs au système

reproducteur. Parmi ces produits chimiques, on retrouve:

• Le plomb dans les peintures à base de plomb;

• La silice cristallisée dans les briques et le ciment, ou autres produits de maçonnerie; et

• L’arsenic et le chrome dans le bois ayant subi un traitement chimique.

Le risque associé à de telles expositions varie selon la fréquence à laquelle on effectue ces

travaux. Pour réduire toute exposition à ces produits: travailler dans un endroit bien aéré, en

utilisant du matériel de sécurité homologué tel un masque antipoussières spécialement conçu

pour filtrer les particules microscopiques.

• Limiter toute exposition prolongée avec les poussières provenant du ponçage,

sciage, meulage, perçage ou toute autre activité de construction. Porter des

vêtements de protection et nettoyer à l’eau savonneuse les parties du corps

exposées. Le fait de laisser la poussière pénétrer dans la bouche, les yeux ou la peau peut

favoriser l’absorption de produits chimiques dangereux.

AVERTISSEMENT: cet outil peut produire et/ou répandre de la poussière susceptible de

causer des dommages sérieux et permanents au système respiratoire. Utiliser systématiquement

un appareil respiratoire antipoussières homologué par le NIOSH ou l’OSHA. Diriger les particules

dans le sens opposé au visage et au corps.

AVERTISSEMENT : avant de se mettre au travail, s’assurer de déterminer la

classification des dangers posés par les poussières produites. Utiliser un aspirateur

industriel de la classe officielle de sécurité, appropriée et homologuée, conformément

aux consignes locales de lutte contre les risques posés par les poussières.

AVERTISSEMENT : porter systématiquement une protection auditive individuelle

appropriée. Sous certaines conditions et suivant la durée d’utilisation, le bruit émanant de ce

produit pourrait contribuer à une perte de l’acuité auditive.

Produkspesifikasjoner

Merke:	DeWalt
Kategori:	Ikke kategorisert
Modell:	DWH053

Trenger du hjelp?

Hvis du trenger hjelp med DeWalt DWH053 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Ikke kategorisert DeWalt Manualer

DeWalt DCF403 Bruksanvisning

3 Januar 2025

DeWalt DCF503E Bruksanvisning

3 Januar 2025

DeWalt DCB187 Bruksanvisning

12 Desember 2024

DeWalt DCB184G Bruksanvisning

12 Desember 2024

DeWalt DCB183G Bruksanvisning

12 Desember 2024

DeWalt DCB185 Bruksanvisning

12 Desember 2024

DeWalt DCB124 Bruksanvisning

12 Desember 2024

DeWalt DCB180 Bruksanvisning

12 Desember 2024

DeWalt DCB184 Bruksanvisning

12 Desember 2024

DeWalt DCB189 Bruksanvisning

12 Desember 2024

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Amazfit Bip 5 Unity Bruksanvisning

16 Januar 2025

Lowepro Flipside Trek BP 350 AW II Bruksanvisning

16 Januar 2025

Audison Prima APS 8 D Bruksanvisning

16 Januar 2025

Black Line BLMH 36 Bruksanvisning

16 Januar 2025

Absco M 151151 Bruksanvisning

16 Januar 2025

ADDAC System ADDAC200CT Bruksanvisning

16 Januar 2025

Emerio LR-131325.1 Bruksanvisning

16 Januar 2025

Sony WRT-822B Bruksanvisning

16 Januar 2025

IKEA SMÅSPORRE 204.570.22 Bruksanvisning

16 Januar 2025

IKEA SÄFFEROT 904.570.71 Bruksanvisning

16 Januar 2025