Eastron SDM630 Bruksanvisning

Eastron Måleutstyr SDM630

Les nedenfor 📖 manual på norsk for Eastron SDM630 (4 sider) i kategorien Måleutstyr. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/4

Voltage

input

Rated voltage

3×220/400V

Reference frequency

50Hz/60Hz

Power consumption

<2W

Current

input

Input current

0.5-10(100)A

Starting current

0.004Ib

Power consumption

<1VA (maximum current)

Pulse

Pulse width

200/100/60ms

Pulse constant

400imp/kWh

Communi-

cation

Interface

RS485(A+, B-)

Protocol

MODBUS, DL/T 645-2007

Overall

dimension

L×W×H

100mm×72mm×66mm

Maximum onnecting

capacity

Flexible cable

16mm^2

Temperature range

Working

temperature

-25 ~55℃ ℃

Storage

temperature

-40 ~70℃ ℃

Humidity

≤90%(no condensation)

Altitude

<2000m

Buttonicon

Button function

Selects the Voltage and Current display screens

In Set-up Mode, this is the “Left” or “Back” button.

Select the Frequency and Power factor display

screens

In Set-up Mode, this is the “Up” button

Select the Power display screens

In Set-up Mode, this is the “Down” button.

Select the Energy display screens

In Set-up mode, this is the “Enter” or “Right” button

1 3 5 N L1 L1' L2 L2' L3 L3' N'

***

. . .

B A - + - +

RS485 Clock1 pulse Clock2 pulse

1.LED status the indicator LED is flashing or off.:

Description:

( )1 the red light is pulse output. the flash frequency of the red light

can show the power strength. the bigger power measured,the red

light will flash faster.

2 Fault description the measurement is not inaccurate.. :

Suggestion check the wiring of inlet and outlet of energy meter: .

Namely make sure that the wiring of A B C three phase of energy, / / ( )

/ / meter is matched with the A B C phase of utility grid.

3.Fault description the energy meter failed to communicate with :

SPH.

Suggestion:

( ) “ “ “ “1 check the CT mode of SPH is energy meter mode .

( ) + - 2 check the voltage between A and B is within the range of

+( . ~ . )4 4 4 5 V

( ) . 3 check the RS485 communication cable is right That is to say

the A B of energy meter is matched to A B of SPH Also +/ + +/ - . ,

make sure the wiring is fixed firmly .

a When SPH series products are used in three phase power grid. -

, “ “ system please set the CT mode” of SPH as Meter Mode”.

More details please refer to SPH user manual. ,

b. When connecting three-phase energy meter, SPH gets the

information of the sum of three-phase active power to process the

logical control by RS485 communication.

Note: We describe Growatt-SPH6000 and Growatt-SPH11000

TL3-HV as “SPH” as below.

d.Connect the end of the RS485 cable to SPH RJ45(Sensor)

port.

e. Connect the A+ of RS485 cable to Pin7 and B- of it to Pin8.

Me te r

Lo ad

RS -4 85

∑ ≥P 0 , Charge

∑ ≤P 0 , Di scha rge

Produkspesifikasjoner

Merke:	Eastron
Kategori:	Måleutstyr
Modell:	SDM630

Trenger du hjelp?

Hvis du trenger hjelp med Eastron SDM630 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Måleutstyr Eastron Manualer

Eastron SDM630 Bruksanvisning

1 Januar 2025

Måleutstyr Manualer

Nyeste Måleutstyr Manualer

Owon DGE3000 Bruksanvisning

16 Januar 2025

Voltcraft FM-80 Bruksanvisning

16 Januar 2025

Kyoritsu KEW3125B Bruksanvisning

16 Januar 2025

Owon HSA1016 Bruksanvisning

16 Januar 2025

Tempo OFL100 OTDR Bruksanvisning

15 Januar 2025

Duro Pro D-KLL 10 Bruksanvisning

15 Januar 2025

Duro Pro D-LEM 40 Bruksanvisning

15 Januar 2025

Duro Pro D-LEM 40/1 Bruksanvisning

14 Januar 2025

PeakTech 6226 Bruksanvisning

14 Januar 2025

Ebro PHT 830 Bruksanvisning

14 Januar 2025