Flycam Flowline Edge V1 Bruksanvisning
Les nedenfor 📖 manual på norsk for Flycam Flowline Edge V1 (6 sider) i kategorien Stativ. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/6
1
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
A s s e m b l y M a n u a l
Flowline Edge V1 Stabilizaon Arm
Flowline Edge V1 Stabilizaon Arm for Flowline Rigs,
Cameras & Gimbals (FLCM- -EDGE V1)
2 x Screws
(Size: 4 x 12)
Height Riser
2mm Allen Key
2 x Screws CSK
(Size: 3 x 8)
2
• Similarly, remove the second screw.
• Now, remove the Hook from the Flowline
Support Arm (Not Included).
• As shown in the image, take the Cord
bundle out from the Cup and pull the Cord
unl a Cord lock comes out.
• Separate the Cord and the Cord lock.
• Keep the lock aside to re aach it later.-
• To detach the Flowline Support Rod
(Not Included), pull it upwards.
Flowline Edge Setup
• Loosen the screw of the Camera Hook
aached to the Flowline Support Arm
(Not Included) using the Allen key.
• Similarly, separate the Cord from the Cup to
mount it back later.
NOTE: It is recommended to aach the minimum required (weight 3kg / 6lb) for pulling down the
balancing rope to ensure proper operaon of your Flycam Flowline system.
3
• To detach the extension from the Support
Rod of the Vest, remove its screw using a
screwdriver.
• Detach the extension from the Support Rod
(Not Included) and align the cord with the
height riser, as shown in the image.
• Aach the extension with the height riser
and push it inside.
• Similarly, ghten the top screw using the
screwdriver.
• Loosen the knob of the Flowline Edge.
• Dissemble the Camera Hook and the
Support Rod from the Vest.
• Insert a screw in the Support rod and
ghten it using the screwdriver.
Produkspesifikasjoner
| Merke: | Flycam |
| Kategori: | Stativ |
| Modell: | Flowline Edge V1 |
Trenger du hjelp?
Hvis du trenger hjelp med Flycam Flowline Edge V1 still et spørsmål nedenfor, og andre brukere vil svare deg
Stativ Flycam Manualer
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
8 Januar 2025
8 Januar 2025
8 Desember 2024
28 Oktober 2024
28 Oktober 2024
Stativ Manualer
- Stativ Bauhn
- Stativ Hama
- Stativ Neewer
- Stativ Godox
- Stativ Kogan
- Stativ DJI
- Stativ Sony
- Stativ Vello
- Stativ Manfrotto
- Stativ Kodak
- Stativ Celly
- Stativ Sachtler
- Stativ IOptron
- Stativ Tiltall
- Stativ Square Jellyfish
- Stativ Proaim
- Stativ Libec
- Stativ Gravity
- Stativ Alpine
- Stativ Celestron
- Stativ Glide Gear
- Stativ Vanguard
- Stativ Vinten
- Stativ Stalco
- Stativ Auray
- Stativ SteadiCam
- Stativ ARRI
- Stativ Fidlock
- Stativ Vortex
- Stativ Robus
- Stativ Miller
- Stativ Studio Assets
- Stativ Easyrig
- Stativ Magnus
- Stativ Peak Design
- Stativ Hohem
- Stativ IFootage
- Stativ Cartoni
- Stativ HPRC
- Stativ Really Right Stuff
- Stativ Rollei
- Stativ FeiyuTech
- Stativ Velbon
- Stativ 3 Legged Thing
- Stativ FLM
Nyeste Stativ Manualer
13 Januar 2025
13 Januar 2025
13 Januar 2025
13 Januar 2025
13 Januar 2025
13 Januar 2025
13 Januar 2025
13 Januar 2025
13 Januar 2025
13 Januar 2025