Gamber-Johnson 7160-1882-10 Bruksanvisning
Gamber-Johnson
Vugge/dokkingstasjon
7160-1882-10
Les nedenfor 📖 manual på norsk for Gamber-Johnson 7160-1882-10 (6 sider) i kategorien Vugge/dokkingstasjon. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/6
7160-1882-XX
DELL 7030 TABLET DOCKING STATION
Rev A
INST-1141
Printing Spec:
PS-001
© Copyright 2023 Gamber-Johnson, LLC
This instruction sheet is for the following products:
Item No. 7160-1882-00
Lite PCB (No HDMI)
Item No. 7160-1882-10
Full PCB (With HDMI)
1 / 6
This instruction sheet is for the Dell 7030 Tablet Docking Station. For instructions on
features, set-up, and operation of the Dell 7030 Tablet, please refer to the manual provided
by Dell with the Tablet.
This Docking Station is designed to be used with a variety of Gamber-Johnson mounting
systems. Installation instructions for other Gamber-Johnson products are provided with
each individual product.
A Dell certified power adapter
must
be used to power the docking station, the below power
adapter are sold separately unless ordered through a KIT.
(See Page 4 For Isolated Power Adapter Options)
7300-0468
- 11-16VDC Input - Available with the Docking Stations as a KIT:
7170-1053-00 (No
HDMI) or 7170-1053-10 (With HDMI)
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Form
Revision
Product
INSTALLATION INSTRUCTIONS
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
During Installation:
DO NOT
connect this docking station to the vehicle battery until:
All other electrical connections are made
1.
Mounting of all components is complete
2.
Verification that no shorts exist in the entire system
3.
DO NOT
install equipment or route wiring or cords in the deployment path of any air bag.
When drilling into the vehicle, DO make sure that both sides of the surface are clear of anything that
could be damaged.
CAUTION:
If wiring is shorted to the frame, high current conductors can cause hazardous sparks
resulting in electrical fires or flying molten metal.
After installation:
Test the docking station to ensure that it is working properly.
File these instructions in a safe place and refer to them when performing maintenance or re-
installing.
WARNING
: Failure to follow all safety precautions and instructions may result in property damage,
serious injury, or death.
IMPORTANT SAFETY INFORMATION FOR INSTALLERS
Safety is dependent on the proper installation and servicing of this docking station. It is important to
read and follow all instructions before installing this product.
To properly install a Gamber-Johnson docking station you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the installation and service of
aftermarket vehicle equipment.
There are no adjustments required at any time of the electrical components within the docking station.
Opening the docking station will void the product warranty.
Conduct a "Bench Test"
Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and
software issues are resolved prior to installation:
Make sure the computer is operational by itself.
1.
Insert computer into the docking station and verify that the computer is
2.
operating in the dock.
Interconnect entire assembly and verify start-up of all components, including
3.
other equipment (printers, modems, scanners, etc.)
Gamber-Johnson recommends positioning of all mounts and equipment in the vehicle
prior to the actual install to verify that mounting locations are safe and practical.
PRE-INSTALLATION RECOMMENDATOINS
2 / 6
Guide
Pins
Release Latch
Connector
Gasket
Connector
Lock
Stylus Holder
Hand Strap & Magnetic Mount
Clearance
Mounting Studs
1/4-20 x 0.90"
Mounting HW Provided
Recommended Torque = 15in/lbs
Warranty Label
HDMI
(-10 SKU ONLY)
Cable Restraint Bracket
(Cable Ties Provided)
2x USB-A (3.0)
(1.5A)
USB-C
(2A)
POWER INPUT
(19VDC)
RJ-45
Ethernet
DB9-RS232
Serial Port
Serial Label
Contains:
Product Information,
MFG Date, Serial Number, Ect.
DELL 7030 TABLET DOCKING STATION
FEATURE IDENTIFICATON
3 / 6
Produkspesifikasjoner
| Merke: | Gamber-Johnson |
| Kategori: | Vugge/dokkingstasjon |
| Modell: | 7160-1882-10 |
Trenger du hjelp?
Hvis du trenger hjelp med Gamber-Johnson 7160-1882-10 still et spørsmål nedenfor, og andre brukere vil svare deg
Vugge/dokkingstasjon Gamber-Johnson Manualer
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
24 Oktober 2024
Vugge/dokkingstasjon Manualer
- Vugge/dokkingstasjon Vorago
- Vugge/dokkingstasjon Kogan
- Vugge/dokkingstasjon Vantec
- Vugge/dokkingstasjon Icy Box
- Vugge/dokkingstasjon Havis
- Vugge/dokkingstasjon Xcellon
- Vugge/dokkingstasjon Defender
Nyeste Vugge/dokkingstasjon Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024