Genexis Hybrid Element NT Bruksanvisning

Genexis AV-forlenger Hybrid Element NT

Les nedenfor 📖 manual på norsk for Genexis Hybrid Element NT (1 sider) i kategorien AV-forlenger. Denne guiden var nyttig for 6 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/1
Hybrid Element installation manual
1. Removing dummy cover
• Pushandholdtheunlocking
button.
• Movethedummycoververtically
untilitisevenwiththemarked
lineandtakeitoff.
2. Preparation and
installation of the CATV
receiver (optional)
• RemovetheCATVdrawerfromthe
baseplate.
• Removethedustcapfromthe
CATVdrawer.
• PlacetheCATVreceiverinsidethe
CATVdrawer.Pushgentlyuntil
youhearanaudible‘click’.

• Removethedustcapfromthe
CATVreceiver.(a)
• SlidetheCATVdrawerbackinthe
FTUandpushdownwardsuntil
youhearanaudible‘click’.(b)
3. Installation of the Hybrid
Element
• Removetheprotectioncapfrom
theElementfiberconnector.
• CarefullypositiontheHybrid
ElementontopoftheFiber
TerminationUnit.Thebottomof
theElementshouldmatchthe
markedlineontheFTU.
• InstalltheHybridElementby
gentlypushingthefrontpart,
whileslidingitdownuntilthe
FTUiscoveredandyouhearan
audible‘click’.
• TheHybridElementisnow
correctlyinstalled.
Hybrid Element connector
numbering
The number of Ethernet ports
available is dependent upon the
specific Hybrid Element model. What
your Hybrid Element looks like may
differ slightly from the image.
4. Powering of the Hybrid
Element
• Connectthe12Vplugofthe
suppliedadaptertotheHybrid
Elementandconnecttheadapter
toapowersocket.
www.genexis.eu Rev.2
Click!
Click!
Hybrid Live! slot
(LAN3)
Ethernet port 1
(LAN1)
Ethernet port 2
(LAN2)
a. b.

Produkspesifikasjoner

Merke: Genexis
Kategori: AV-forlenger
Modell: Hybrid Element NT

Trenger du hjelp?

Hvis du trenger hjelp med Genexis Hybrid Element NT still et spørsmål nedenfor, og andre brukere vil svare deg