Gioteck HF-2 (PS3) Bruksanvisning

Gioteck Kontroller HF-2 (PS3)

Les nedenfor 📖 manual på norsk for Gioteck HF-2 (PS3) (7 sider) i kategorien Kontroller. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/7
HF-2 BLUETOOTH CONTRTOLLER FOR PS3
ERGONOMIC FPS CONTROLLER
thank you
Thank you for purchasing the HF-2 Bluetooth Controller from Gioteck. We hope that this product will go beyond
your expectations for a quality made accessory. Please read this booklet thoroughly before using the product
and review the PS3™ manual for additional details regarding PS3™ operation. Thank you & enjoy!
precautions
This product has been designed
with the highest concern for safety.
However, any electrical device, if used
improperly, has the potential to
cause harm. To help ensure risk-free
operation please pay attention
to the following guidelines.
Use only as intended. This is a
precision product, handle with care.
Contains small parts. Not suitable for
children under 3 years of age.
Store in a dry & dust free area.
Do not store in areas of extreme
heat or cold, and avoid direct
sunlight or heat sources eg. heaters.
Do not allow the product to get wet or
dirty; doing so may cause damage.
Do not clean with benzene, paint
thinner, acetone, alcohol, or other
such solvents.
Do not take the product apart;
doing so will void your warranty and
may cause electrical shock.
warnings
This symbol indicates important
installation, operational or
maintenance instructions. Always
follow these instructions closely.
environment
Please help to conserve the
environment by recycling the
inner cardboard packaging of
this product.
This controller should NOT
be disposed of in normal
household waste. It should be
disposed of separately. Please
take it to an electrical waste
collection point.
02 | CONTENTS & PRECAUTIONS
CONTENTS
02 | Contents & Precautions
03 Features & Details|
04 | Setup
05 |Battery Replacement
06 |Pairing
07 |Operation
09 |Thumbstick Calibration
10 |Troubleshooting
11 |Legals
set up
The HF-2 Controller is very easy to set up, and for your convenience it can be used as either a wired or
wireless device. To use your controller as a wired device connect the USB to the PS3™ [01] and the mini USB to
the controller’s charging socket [02].
04 | SETUP
01
02
The HF-2
does not
need to
contain
batteries
to function
as a wired
device.

Produkspesifikasjoner

Merke: Gioteck
Kategori: Kontroller
Modell: HF-2 (PS3)

Trenger du hjelp?

Hvis du trenger hjelp med Gioteck HF-2 (PS3) still et spørsmål nedenfor, og andre brukere vil svare deg