Hansgrohe 04201000 Bruksanvisning
Hansgrohe
Dusjsystem
04201000
Les nedenfor 📖 manual på norsk for Hansgrohe 04201000 (12 sider) i kategorien Dusjsystem. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/12
IP C
04210000
04211000
04212000
IP E
04199000
04200000
04201000
IP S
04203000
04204000
04205000
Installation Instructions / Warranty
2
IP Trim Sets
IP C valve trim 04212000
IP E valve trim 04201000
IP S valve trim 04205000
shower arm -- included with shower sets and
tub/shower sets only
tub spout -- included with tub/shower sets
only
Valve trim only
IP C 04212000
IP E 04201000
IP S 04205000
Shower set (includes valve trim, shower arm,
showerhead)
IP C 04211000
IP E 04200000
IP S 04204000
Tub/shower set (includes valve trim, shower arm,
showerhead, tub spout)
IP C 04210000
IP E 04199000
IP S 04203000
3⅛"
7¾"
3"
7¾"
2½"
5¼"
½"
2½"
½" NPT
2½"
5"
5½"
3½"
7¾"
3
Installation considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• Pressure balance valve rough 04120000 (not
included) must be installed, and the finished
wall surface must be installed and made wa-
tertight before installation of this trim kit.
• The tub spout (included with 04210000 /
04199000 / 04203000 only) requires a ½"
NPT male nipple, extending 4" - 4 ¼" outside
the surface of the finished wall.
• The shower arm requires a ½" NPT female
fitting.
• The max. flow rate of the valve is 4.5 GPM.
IP C showerhead
1.6 GPM max
Full spray, massage, intense
massage
IP E,S showerhead
1.6 GPM max
Full spray, massage, intense
massage
• The max. flow rate of the showerhead is 1.6
GPM.
• The shower valve incorporates a high tem-
perature limit stop which must be set to comply
with local plumbing codes.
• This product is for use with shower heads rated
at 1.5 GPM (5.6 l/min) or higher.
• To prevent scald injury, the maximum output
temperature of the shower mixing valve (not
included) must be no higher than 120°F. In
Massachusetts, the maximum output tempera-
ture can be no higher than 112° F.
• Know and follow all applicable local plumb-
ing codes when setting the temperature on the
water heater.
½"
3"
5¼"
2
6
°
2
6
°
3¼"
G ½
3"
4"
2
6
°
2
6
°
Produkspesifikasjoner
| Merke: | Hansgrohe |
| Kategori: | Dusjsystem |
| Modell: | 04201000 |
Trenger du hjelp?
Hvis du trenger hjelp med Hansgrohe 04201000 still et spørsmål nedenfor, og andre brukere vil svare deg
Dusjsystem Hansgrohe Manualer
12 Desember 2024
Dusjsystem Manualer
Nyeste Dusjsystem Manualer
31 Desember 2025
20 Desember 2024
14 Desember 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024