Hartke 410TP Bruksanvisning

Les nedenfor 📖 manual på norsk for Hartke 410TP (4 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/4
4 x10Stackable
Bass Enclosure
Hartke
SERIES
410TP Introduction and Features
Congratulations on purchasing the 410TP bass enclosure by Hartke! The
Transporter Series enclosures have been designed to provide excellent tone
with a fast attack, deep low-end and punchy output. The 410TP Features four
10”, proprietary low frequency drivers with specially designed aluminum cones,
large voice coils on Kapton formers, impregnated fabric surrounds, and matched
convex dust covers all mounted in a heavy- duty steel frame. Using heavy-duty
plywood construction, covered in rugged carpet with recessed, dual 1/4-inch
jack plate and ergonomic handle, the 410TP will provide reliable performance
from gig to gig and venue to venue.
In these pages, you’ll find a detailed description of the features of the 410TP ,
as well as a description of its front and rear panels, step-by-step instructions for
its setup and use and full specifications. You’ll also find a warranty card
enclosed—please don’t forget to fill it out and mail it in so that you can receive
online technical support and so we can send you updated information about
these and other Samson products in the future.
We recommend you record your serial number in the space provided below for
future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number, the
unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-
6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the origi-
nal carton and packing materials.
410TP Features
4 x 10 Inch heavy-duty Low
Frequency drivers
3/4" Plywood construction
Tuned Front Port
Perforated metal speaker grill
Recessed handles
Stacking corners
Dual, parallel wired 1/4" jacks
Covered in durable carpet
About Impedance
Before you hook up your speaker cabinet, be sure that you understand a little about
impedance. Impedance is the electronic load that the speaker puts on the power amplifier
and is measured in Ohms.
Here is the tricky, yet simple rule of impedance: When two speakers are wired in "Parallel"
the total impedance is cut in half and
when two speakers are wire is “Series”
the total impedance is the sum of the
speakers individual impedance.
The 410TP impedance is 8 Ohms. So,
when two 410TP’s are connected
together in parallel, the total impedance
is 4 Ohms. The impedance of your
speaker also has an effect on your
amplifier. In general, the lower the
impedance, the more power your ampli-
fier will put out.
IMPORTANT: There is a minimum safe
impedance so be sure to check the
manufacturer’s recommended imped-
ance for your amplifier to avoid any
damage to your amplifier or voiding
your warranty.
Connecting the 410TP to Your Amplifier
The 410TP connections are made via
1/4” phone jacks located on the rear
panel jack-plate. Be sure to make your
connection with un-shielded speaker
cable. Connect the Amplifier Output to
the speaker Input on the 410TP's rear
jackplate.
Using the EXTENSION Output
The 410TP provides a convenient
Extension Output for connecting addi-
tional speaker cabinets in parallel. Be
sure to read the section above on
impedance to insure a proper hook up
with your amplifier. Follow the steps
below to connect two 410TP’s using the
Extension Output. Connect the
Amplifier Output to the Input of the first
410TP. Now, connect the Extension
Output to the Input of the second
410TP.
Har t ke Sys t e ms
Distributed Exclusively by
Samso n Technolo gies Co rp.
Hicksv ille, New York 11802
MOD EL 2000
200 WATTS
8
= 120 WATTS
4
= 200 WATTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-
ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK
HAZ ARD, DO NOT EXPOS E TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K. SERIAL NUMBER
115
~ AC INPUT
115V/230V 50/60Hz
FUSE
5A/2 50V, 180 W (115 V)
2.5A/2 50V, 450W (230V)
SP EAKER OUTPU TS
8
ON OFF
HPF
EFFE CT
SENDRETUIRN
410TP BAS S CABI NE T
3 0 WATT S
Hartke
8 EXTENS I O N
IN PU TS
MADE IN CH INA
SERIAL NUMBER
Hartke S y s te m s Di buted worldwide by S a m s on Te chnologie s
www.ha rtke .com
8
Connecting the 410TP
Har t ke Sys t e ms
Distributed Exclusively by
Samso n Technolo gies Co rp.
Hicksv ille, New York 11802
MOD EL 2000
200 WATTS
8
= 120 WATTS
4
= 200 WATTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-
ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK
HAZ ARD, DO NOT EXPOS E TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K. SERIAL NUMBER
115
~ AC INPUT
115 V/230V 5 0/60 Hz
FUSE
5A/2 50V, 180 W (115 V)
2.5A/2 50V, 450W (230V)
SP EAKER OUTPU TS
8
ON OFF
HPF
EFFE CT
SENDRETUIRN
410TP BAS S CABI NE T
3 0 WATT S
Hartke
8 EXT S I O N
IN PU TS
ADE IN CH INA
SERIAL NUMBER
Hartke S y s te m s Di bute d worldwide by S a m s on T e chnologies
www.ha rtke .com
410TP BAS S CABI NE T
3 0 WATT S
Hartke
8 EXT S I O N
IN PU TS
ADE IN CH INA
SERIAL NUMBER
Hartke S y s te m s Di bute d worldwide by S a m s on T e chnologies
www.ha rtke .com
410TP BAS S CABI ET
300 WAT TS
Hartke
8 EXTENS I O N
PU TS
MADE IN CH INA
SERIAL NUMBER
Hartke S y s te m s Dis tribute d wor ldwi y S a m s on Te chnologie s
www.ha rtke .com
8

Produkspesifikasjoner

Merke: Hartke
Kategori: Ikke kategorisert
Modell: 410TP

Trenger du hjelp?

Hvis du trenger hjelp med Hartke 410TP still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Hartke Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer