Havis C-DMM-122 Bruksanvisning

Les nedenfor 📖 manual på norsk for Havis C-DMM-122 (7 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/7
C-DMM-122_INST_REV-9- 13
INSTALLATION INSTRUCTIONS
C-DMM-122
2013-2017 Ford Interceptor Sedan
SWING-OUT DASH MONITOR MOUNT
** Does NOT work in Interceptor Sedan with Interior Upgrade Package (Code 12P) **
Always!
Read all instrucons before installing any Havis, Inc. products.
Check for obstrucons (Wires, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
The Dash Monitor Mount bracket system requires two or three main parts that are sold
separately. See web site Monitor Congurator for more detailed bracket informaon.
hp://www.havis.com/monitor_mounts.htm
1 122)- Vehicle Specic dash mount bracket. (C-DMM-
1 - Computer Specic Monitor adaptor bracket. (C- -200 series) MM
1 - Oset adaptor bracket. (C- -301) MM
The C- -301 oset adaptor goes between the C-DMM-122 and C- -2XX. MM MM
It may not be required in some applicaons.
Docking staons for tablet applicaons can be bolted directly to C-DMM without adaptor. Oset
adaptor C- -303 is available if addional posioning opons are desired for docking station.MM
TOOLS REQUIRED:
• Ratchet Wrench Jig Saw or Plasc cung tool
• Socket Set Dash panel removal tools
• Open End Wrench 7/16” - Open End Wrench 10mm
• Phillips Screwdriver
HARDWARE and PARTS:
QTY: DESCRIPTION: PART #:
1 Upper Support Bracket CM005091
1 Lower Support Bracket CM005131
2 GSM31999 1/4" x 1/2” Carriage Bolt
2 1/4"x 1/2" Pan Head Phillips Bolt GSM33124
2 1/4" Serrated Flange Hex Nut GSM30023
4 GSM31005 1/4” Flat Washer
4 GSM31026 1/4” Lock Washer
2 6mm x 30mm Hex Bolt GSM33713
1 Monitor Adapter Hardware Included with C- -2XX kit MM
Note: The swing door ulizes a gas spring to assist in opening the door and to eliminate the possibility of
it slamming shut. If addional damping is desired because of heavier equipment, an oponal stronger gas
spring is available under Part Number CM86662-30 (sold separately)
C-DMM-122_INST_REV-9- 13
CM005091
Upper Support Bracket
Main frame Assembly
for Interceptor Sedan
CM005131
Lower Support Bracket
C- - MM 301
Oset Adaptor
C- - MM 201
Monitor Mount Adaptor
(VESA bracket shown)
C-DMM-122_INST_REV-9- 13
View of dash instrument panel
Carefully cut slot with air saw, knife or other tool
as desired
Drill both ends of the slot with 1/4" drill bit
Layout a 1/4" high x 5 ½” long slot in the center of
the trim panel at crease below the 12 volt sockets.
(as shown by the white line)
Disconnect plugs and remove lower dash panel

Produkspesifikasjoner

Merke: Havis
Kategori: Ikke kategorisert
Modell: C-DMM-122

Trenger du hjelp?

Hvis du trenger hjelp med Havis C-DMM-122 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Havis Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer