Hoffman A1412CH Bruksanvisning
Hoffman
Stikkontakt
A1412CH
Les nedenfor 📖 manual på norsk for Hoffman A1412CH (2 sider) i kategorien Stikkontakt. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/2

© 2013 Pentair Equipment Protection PH 763 422 2211 • hoffmanonline.com 87567803Rev. B P/N 23155002
Repainting Homan Standard Paint
Check with the paint manufacturer to insure the paint you are applying is compatible
with the paint on the Homan product.
Homan uses the following TGIC polyester powder coating nishes on standard
catalog items:
1. ANSI 61 Gray
2. RAL 7035
3. White
Refer to homanonline.com for the specic paint nish of the product that you
propose to repaint. When in doubt, consult your local Homan distributor.
IMPORTANT: For best adhesion results, correct surface preparation before
repainting is essential.

GENERAL: All Homan TGIC polyester powder coated nishes can be repainted.
IMPORTANT: For best renishing results, always follow the specic instructions
provided by your paint manufacturer.
1. Surface Preparation: Generally the following surface preparation can be used.
A. Thoroughly sand all enclosure surfaces with 180 grit sandpaper. If sanding marks
are objectionable, nish sanding with 220 or 240 grit sandpaper.
B. Wet wipe all surfaces with a solvent to remove any possible contaminants.
C. Apply two or three medium to light coats of paint. Allow two or three minutes
ash o between coats.
D. Allow paint to cure adequately. Consult with your paint manufacturer for proper
cure time and hardness prior to testing the paint for adhesion. Air dry enamels
may require signicantly longer cure times over some powders.
2. Paints to use: Various types of paint exhibit greater adhesion qualities than others
when applied over polyester powder. Below is a list of nishes that exhibit very good
adhesion properties.
• Two-component epoxies
• Some two-component polyurethanes
• Alkyd baking enamels
- To avoid discoloration of alkyd nishes do not bake at temperatures
exceeding 150°F.
NOTICE: Always test the repainting process on an inconspicuous area prior to use.
Produkspesifikasjoner
Merke: | Hoffman |
Kategori: | Stikkontakt |
Modell: | A1412CH |
Trenger du hjelp?
Hvis du trenger hjelp med Hoffman A1412CH still et spørsmål nedenfor, og andre brukere vil svare deg
Stikkontakt Hoffman Manualer

6 April 2025

6 April 2025

6 April 2025

5 April 2025

5 April 2025

5 April 2025

5 April 2025
Stikkontakt Manualer
- Stikkontakt ORNO
- Stikkontakt Hama
- Stikkontakt Hazet
- Stikkontakt Schwaiger
- Stikkontakt IKEA
- Stikkontakt Kogan
- Stikkontakt Trust
- Stikkontakt Asus
- Stikkontakt Brennenstuhl
- Stikkontakt Extron
- Stikkontakt Niceboy
- Stikkontakt EMOS
- Stikkontakt CyberPower
- Stikkontakt Bearware
- Stikkontakt Showtec
- Stikkontakt V-Tac
- Stikkontakt Nedis
- Stikkontakt Logilink
- Stikkontakt Asrock
- Stikkontakt Adam Hall
- Stikkontakt Jung
- Stikkontakt IOIO
- Stikkontakt Middle Atlantic
- Stikkontakt AVM
- Stikkontakt Elektrobock
- Stikkontakt PureLink
- Stikkontakt Perel
- Stikkontakt Vimar
- Stikkontakt Lanberg
- Stikkontakt Savio
- Stikkontakt Kopp
- Stikkontakt InterBar
- Stikkontakt Peerless-AV
- Stikkontakt EQ-3
- Stikkontakt Hager
- Stikkontakt Berker
- Stikkontakt SKROSS
- Stikkontakt Lenoxx
Nyeste Stikkontakt Manualer

4 April 2025

3 April 2025

16 Januar 2025

16 Januar 2025

16 Januar 2025

15 Januar 2025

15 Januar 2025

14 Januar 2025

14 Januar 2025

8 Januar 2025