House Of Marley Stir It Up Lux Bruksanvisning

House Of Marley Platespiller Stir It Up Lux

Les nedenfor 📖 manual på norsk for House Of Marley Stir It Up Lux (26 sider) i kategorien Platespiller. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/26
Stir It Up Lux / Bluetoot Turntable Quick Start Guide Quick Start Guide Quick Start Guide Quick Start Guide Quick Start Guide
 
A. RCA Line Out
B. Pre-Amp Switch Button
C. USB-C Out
D. O// Knob
E. Headphone Jack
LEGEND
F. Bluetooth® Button
G. - VOL + Knob
H. Anti-skating Knob
A.
D. E. F.
B.
G. H.
FUNCTION LAYOUT
OUT PUT PRE-AMP
OFF ON OUT 5.0 1.0A
DC IN 15.0V 0.8A
4
Gr. 3 22.5 1.5 1.25
1. Spindle
2. Turntable
3. Balance Weight
4. Anti-Skating Knob
5. Tone Arm Lift Level
6. Tone Arm Rest Holder
7. Tone Arm
English
Français 14
Español 
Deutsche 
Italiano 
Nederlands 
8. Stylus
9. Needle Cover
10. Multi-Function Button
11. Power Adaptor With
Interchangeable Plugs
12.Adaptor
13. Stylus Pressure Gauge
LEGEND
INDEX
3.
12.
4.
6.
2.
1.
5.
11.
8.
9.
10.
PRODUCT MAP
HOW TO VIDEOS
VIDEO TUTORIAL
INSTRUCTIEVIDEO’S
TUTORIELS
VIDEOANLEITUNGEN
DEOS GUÍA
使用方法视频
하는 영상
使用方法動画
ATTENTION: PLEASE READ QUICK START GUIDE BEFORE USE
ATTENTION: PRIÈRE DE LIRE LE GUIDE DE
DÉMARRAGE RAPIDE AVANT UTILISATION
ATENCIÓN:
LEA LA GUÍA DE INICIO RÁPIDO ANTES DE USARLO
BEACHTUNG: VOR DEM GEBRAUCH BITTE DIE SCHNELLSTARTANLEITUNG LESEN
ATTENZIONE: LEGGERE LA GUIDA DI AVVIAMENTO RAPIDO PRIMA DEL USO
OPGELET: VOOR HET GEBRUIK DE SNELSTARTGIDS LEZEN
注意 ご使用前にターを必ず読みださ
提示:使用前請閱讀快捷使用說明
주의 : 사용 전에 빠른 시작 가이드를 읽어 주십시오.
STIR IT UP LUX
QUICK START GUIDE
7.
C.
ENGLISH
13.
Quick Start Gu ide Quick Start Gu ide Quick Start Gu ide Quick Start Gu ide Quick Start Gu ide Quick Start Gu ide
   
BLUETOOTH® PAIRING
Power on the external Bluetooth® device rst before turning on the BT
function on the Turntable.
Press the BT button on the turntable (MFB) to enable the unit to search the
Bluetooth® device till BT indicator light becomes solid. This will indicated
your devices are paired.
NOTE: If the Turntable does not pair with your Bluetooth® device within 30
seconds, press the Bluetooth® search button again on the turntable and it
should pair.
Blue LED light flash
Blue LED light stable
DISCONNECT BLUETOOTH® PAIRING
Long press and hold the BT button till the BT indicator light turns o. Turntable will
then disconnect from external device.
Blue LED light will turn to Red.This indicates Bluetooth is off, but
turntbale still h as power.
VOLUME CONTROL
Increase Volume: Rotate the Volume Knob clockwise.
Decrease Volume: Rotate Volume Knob counter clockwise.
HEADPHONE OPERATION VIA HEADPHONE
JACK
Connect set of headphone (not included) in the headphone jack.
Note: Never put on the headphone till you have plugged in the headphone plug
NON BLUETOOT CONNECTION SETUP
LED will also be solid RED when headphones are plugged in.
CAUTION: Switch o the power to all equipment before making connections.
Read the instructions of each component you intend to use with this unit. Be
sure to insert each plug securely. To prevent hum and noise, avoid bundling the
signal interconnection cables together with the AC power cord.
3. Make sure the stylus needle cover is removed.
4. Turn the RPM dial to the correct speed for the record. E.g. 45 / 33
5. If wanting to play vi Bluetooth – Please see the “Bluetooth Pairing” section
and then come back here once connected to an output device. If wanting to
play vi Line out or Headphone out – please check their sections on how to
connect the output device. And then come back here.
6. Lift the tonearm vi the lift lever and move the tonearm head to the edge
of the record.
7. Now lower the tonearm, by lowering the tone arm lift lever.
NOTE: The turntable platter will auto-start spinning once the tonearm is above
the platter.
8. Once the record is nished, the turntable platter will auto stop. Lift the
tonearm and place it on the tonearm rest.To listen to the B side of your
record, flip the record and repeat the above from step 6.
NOTE: Once nished listening to  record, make sure the stylus needle cover
is re-attached to protect the stylus.
Do not try to adjust the balance weight or anti-skate while playing  record,
this could break the stylus needle and scratch the record.
Do not try to turn the turntable platter manually. Moving or jarring the turn-
table without securing the tonearm, could result in damage to the tonearm.
Re-secured the tone arm before transportation to protect the needle.
Remove the balance weight before transportation to prevent
damage or breakage to the unit.
Quick Start Guide
8
BALANCING THE TONEARM
Option 1 (Without Stylus Pressure Gauge):
Push the Balance Weight on the tone arm until you feel  click.
Remove the stylus needle cover, before attempting to balance the tonearm.
Unclip the tonearm and from its rest , and make sure it is floating freely.
Rotate the Balance Weight back and fourth until the tone arm is parallel with
the platter.
Now place the tonearm back into it’s rest and clip it in so it is secure. Now
hold the balance weight so it cannot move, and with your other hand rotate
the front dial until it is at 0. Your tonearm is now zeroed.
Now you need to add the correct tracking force for the stylus. You do this by
now rotating the whole balance weight counter clock-wise until the correct
weight is added. The correct tracking force for this stylus = 1.5g – 2.5g (2.0g
standard)
NOTE: Once finished, if not using the turntable to play record,
put the stylus needle cover back on to protect the stylus when not
in use.
0
Option 2 (Using Stylus Pressure Gauge):
Push the Balance Weight on the tone arm until you feel  click.
Remove the stylus needle cover, before attempting to balance the tonearm.
Unclip the tonearm and from its rest , and make sure it is floating freely.
Place the stylus pressure gauge onto the platter.
Place the stylus onto the 2-gram mark (recommended Tracking force for our
stylus).
Roatate the balance weight back and fourth until the pressure gauge is level.
Ensure that the needle stays on the 2g mark.
2
ANTI-SKATING
Anti-skate applies  small outward force to the tonearm. This is to counteract
the tendency of the arm to move inward (skate) toward the centre of the record,
especially as the record approaches the centre of the record.
The Anti-Skate should match the tracking force added. So for our turntable,
set to 2.
PLAYING A RECORD
1. Make sure the Stir It Up Lux is connected to the power adapter and  wall
outlet, and the outlet is switched on.
2. Put  vinyl on the turntable.
2
SETUP
ATTACHING THE DRIVE BELT
Note: The drive belt comes pre-installed. However, if when you open the
turntable, there is no visible belt around the sub-platter and motor. Please
re-fit the belt.
To t the belt, put the belt on the motor (this is the gold spindle), then
keeping the belt tight stretch it around the sub-platter. Once in place make
sure the belt if flat and not twisted.
Now place the glass platter on the black sub-platter, by aligning the centre
holes.
Now place the slip mat on the glass platter, again aligning the centre holes.
The platter should be attached to the base.
LINE OUT OPERATION
1.Switch the PRE-AMP OFF/ON SWITCH to ON position.
2. Plug one end of the RCA cable (included) into the LINE OUT socket at the
back of the unit. Be sure to match the color with the socket.
3. Plug the other end of the cable into the LINE IN socket of your home amplier
device.
4. Switch on the unit and the amplier device you connected.
5. Adjust the volume on the amplier device.
AMPLIFIER
OUT PUT PRE-AMP
OFF ON OUT 5.0 1.0A
DC IN 15.0V 0.8A
USBC OUT PORT
You can use the USB-C out port to charge any of your devices from here. We
can recommend charging  House of Marley Speaker from this to save on plug
adaptors.
VOLUME +
VOLUME -

Produkspesifikasjoner

Merke: House Of Marley
Kategori: Platespiller
Modell: Stir It Up Lux

Trenger du hjelp?

Hvis du trenger hjelp med House Of Marley Stir It Up Lux still et spørsmål nedenfor, og andre brukere vil svare deg