Husqvarna-Viking H-Class 100Q Bruksanvisning
Husqvarna-Viking
Symaskin
H-Class 100Q
Les nedenfor 📖 manual på norsk for Husqvarna-Viking H-Class 100Q (44 sider) i kategorien Symaskin. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/44
USER’S GUIDE
When using an electrical appliance, basic safety precautions should always be followed, including
the following:
Read all instructions before using this household sewing machine.
• A sewing machine should never be left unattended when plugged in. Always unplug this
sewing machine from the electric outlet immediately after using and before cleaning.
• Always unplug before relamping. Replace bulb with same type rated 5 Watt.
• This sewing machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the sewing machine by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the sewing machine.
• Use this sewing machine only for its intended use as described in this manual. Use only
attachments recommended by the manufacturer as contained in this manual.
• Never operate this sewing machine if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the sewing
machine to the nearest authorized dealer or service center for examination, repair, electrical
or mechanical adjustment.
• Never operate the sewing machine with any air openings blocked. Keep ventilation
openings of the sewing machine and foot controller free from the accumulation of lint,
dust, and loose cloth.
• Keep À ngers away from all moving parts. Special care is required around the sewing
machine needle.
• Always use the proper needle plate. The wrong plate can cause the needle to break.
• Do not use bent needles.
• Do not pull or push fabric while stitching. It may deÁ ect the needle causing it to break.
• Wear safety glasses.
• Switch the sewing machine off (“0”) when making any adjustment in the needle area,
such as threading needle, changing needle, threading bobbin, or changing presser foot, etc.
• Always unplug sewing machine from the electrical outlet when removing covers, lubricating,
or when making any other user servicing adjustments mentioned in the instruction manual.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where oxygen is being
administrated.
• To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• The sound pressure level under normal operating conditions is 75dB(A).
Machine overview ............................................ 3
Accessories ........................................................... 4
Presser feet ..........................................................4
Stitches ....................................................................5
Unpacking..............................................................7
Connect to the power supply ................... 7
Pack away after sewing.................................. 8
Polarized plug information ................. 8
Changing the presser foot ........................... 8
Changing the needle ....................................... 9
Presser foot lifter .............................................. 9
Presser Foot Up Saftey ................................. 9
Needles ............................................................... 10
Universal needle ...............................10
Stretch needle ....................................10
Embroidery needle ...........................10
Denim needle ....................................10
Wing needle .......................................10
Spool pins........................................................... 11
Horizontal Position ..........................11
Vertical Position ...............................11
Threading the upper thread .................... 12
Needle Threader ...............................14
Threading for Twin Needle ..................... 15
Cutting the Thread ....................................... 15
Wind the bobbin ........................................... 16
Place the Bobbin in the Machine ...18
Lower the feed teeth .................................. 19
Needle thread tension ...............................19
Raise the Bobbin thread ............................ 20
Adjust the presser foot pressure .......... 20
Speed Control Slide ................................... 21
Foot Control .................................................... 21
Machine Sound ............................................... 21
Function buttons ............................................ 22
START/STOP button ....................22
Reverse button ..................................22
FIX button ........................................22
Needle Stop Up/Down...................23
Stitch Length .....................................23
Stitch Width ......................................23
Pattern Selection buttons ................23
Warning Messages/Sound ........................ 24
Main Motor Overloaded .................24
Bobbin Winding Position ...............24
Produkspesifikasjoner
| Merke: | Husqvarna-Viking |
| Kategori: | Symaskin |
| Modell: | H-Class 100Q |
Trenger du hjelp?
Hvis du trenger hjelp med Husqvarna-Viking H-Class 100Q still et spørsmål nedenfor, og andre brukere vil svare deg
Symaskin Husqvarna-Viking Manualer
8 Januar 2025
8 Januar 2025
7 Januar 2025
27 Oktober 2024
Symaskin Manualer
- Symaskin Medion
- Symaskin Pfaff
- Symaskin Brother
- Symaskin Ambiano
- Symaskin Empisal
- Symaskin Bernina
- Symaskin Singer
- Symaskin Durkopp Adler
- Symaskin Bernette
Nyeste Symaskin Manualer
7 Januar 2025
7 Januar 2025
31 Desember 2025
30 Desember 2025
30 Desember 2025
15 Desember 2024
15 Desember 2024
15 Desember 2024
15 Desember 2024
27 Oktober 2024