IFM LW2760 Bruksanvisning

Les nedenfor 📖 manual på norsk for IFM LW2760 (46 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/46
Operating instructions
Electronic level sensor
LW2760
11577130 / 0106 / 2024
GB
LW2760 Electronic level sensor
2
Contents
1 Preliminary note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 Symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2 Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1 Application area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1.1 Application examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.2 Restriction of the application area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4 Function ................................................................... 9
4.1 Measuring principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.1.1 Reflectivity, effect of dielectric constant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.1.2 Foam and turbulence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.1.3 Influence of vessel characteristics and installation . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.2 IO-Link ............................................................... 10
4.3 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.3.1 Analogue output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.3.2 Switching function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.3.3 Defined state in the event of a fault (alert mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.3.4 Simulation function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.3.5 Damping function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.4 Output response in different operating states . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5 Mounting................................................................... 14
5.1 Mounting position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.2 Inclination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.3 Polarisation and orientation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.4 Beam angle and beam width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.5 Tank with conical bottom (emptying hopper) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.6 Non-metallic tanks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.7 Nozzle requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.8 Notes for hygienic applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.8.1 Notes on the use according to EHEDG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5.8.2 Notes on the use according to 3-A® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.9 Mounting in a threaded connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.10 Mounting preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.10.1 Remove the protective cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.10.2 Place the O-ring, grease the thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.10.3 Premount the adapter for pipe fittings (dairy coupling, DIN 11851) . . . . . . . . . . . . . . 20
5.10.4 Preparations when using a welding adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.11 Mount the unit in the tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.11.1 Mount the unit with Tri Clamp adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.11.2 Mount the unit with pipe fitting (dairy coupling, DIN 11851). . . . . . . . . . . . . . . . . . . . 23
5.11.3 Mount the unit with VARIVENT® adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5.11.4 Install the weld-in adapter on the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.11.5 Mount the unit with G1 connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
7 Parameter setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
7.1 Parameter setting via PC and IO-Link master . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
7.2 Parameter setting during operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
7.3 Parameter setting via Bluetooth adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
7.4 Adjustable parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
7.5 System commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7.6 Example parameter setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
8 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
8.1 Function check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
8.1.1 Detection quality check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
8.2 Diagnostic messages, cause, troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Electronic level sensor LW2760
3
9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
9.1 Troubleshooting incorrect level readings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
9.1.1 Level too high / too low . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
9.1.2 Measured value is stuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
9.1.3 Measured value drops when level close to antenna . . . . . . . . . . . . . . . . . . . . . . . . . 38
9.1.4 Measured value fluctuates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
9.1.5 Measured value is occasionally unstable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
9.1.6 Lagging of measured value during rapid level changes. . . . . . . . . . . . . . . . . . . . . . . 40
9.1.7 Measured value correct at 0% (4mA) but incorrect at 100% (20mA) . . . . . . . . . . . . 41
9.1.8 Incorrect measured value when level is above 50% . . . . . . . . . . . . . . . . . . . . . . . . . 41
9.1.9 Measured value drops to zero close to tank bottom . . . . . . . . . . . . . . . . . . . . . . . . . 41
9.1.10 Level measurement is lost in an empty tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
9.1.11 Alert mode when level close to tank bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
10 Maintenance, repair and disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
11 Factory setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
12 Appendix................................................................... 46
12.1 Approvals and certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Produkspesifikasjoner

Merke: IFM
Kategori: Ikke kategorisert
Modell: LW2760

Trenger du hjelp?

Hvis du trenger hjelp med IFM LW2760 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert IFM Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer