Imou Cell Go Full Color Bruksanvisning
Les nedenfor 📖 manual på norsk for Imou Cell Go Full Color (12 sider) i kategorien Kamera. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/12
Failed to Connect to WiFi During Initial Setup Process
1. Conrm at which Page you failed?
When you see this failure page, it is usually because the device Bluetooth cannot establish good
communication with the mobile phone Bluetooth.
You can try the following steps:
Step 1: Check if the indicator light of the device is ashing green slowly. If it
is not, you can press the device button again to activate the device.
Step 2: Press "Try Again" on the APP interface to try again.
If you still cannot set up successfully, please check the “Reset Guide” and
re-add the device.
You can re-add the device after resetting it:
Step 1: Long press the device button to reset until you hear a beep and the green indicator
light ashes.
Step 2: Press “Add Again” on the APP interface to -re add.
Step 3: Conrm that you are connected to a 2.4GHz WiFi network and enter the correct WiFi
password
If you search for two WiFi with the same name in your WiFi list and one of them is displayed as 5G, do not connect to the 5G
WiFi, select the other one to connect.
If your router is dual-band, you can log in to the router settings on the web, turn o the 5G Wi-Fi switch, and only keep 2.4G
Wi-Fi for connection. After the connection is successful, turn on 5G Wi-Fi again.
Step 4: Conrm that the indicator light of the device is in the green light slow ashing state
during the network conguration process. If it isn’t, you can short press the device button to
activate the device and make the device ash green slowly again.
Step 5: The green light is always on, and the device is successfully connected to the router.
If you still cannot set up successfully, please contact our imou support team and Please
provide a screenshot of your failed interface and indicator status of battery camera.
When you see this failure interface, it is usually caused by the inability to establish a connection between
the device and the cloud platform.
1. If the network environment has changed, you can reset the device and enter the network settings to recongure
the network.
2. If the addition fails, you can reset the device and enter the network settings to recongure the network.
When do I need to RESET the device to Re-add?
Reset button for different Imou battery cameras
Press and hold the Reset button for about 5 to 10 seconds until you hear a beep and see the device indicator light slowly
ashing green, then the device is reset successfully.
Produkspesifikasjoner
| Merke: | Imou |
| Kategori: | Kamera |
| Modell: | Cell Go Full Color |
Trenger du hjelp?
Hvis du trenger hjelp med Imou Cell Go Full Color still et spørsmål nedenfor, og andre brukere vil svare deg
Kamera Imou Manualer
28 Oktober 2024
27 Oktober 2024
27 Oktober 2024
16 Oktober 2024
Kamera Manualer
- Kamera Fujifilm
- Kamera Kogan
- Kamera Kodak
- Kamera Aplic
- Kamera Canon
- Kamera Minolta
- Kamera Elmo
- Kamera Arlo
- Kamera Vimar
- Kamera Konica Minolta
- Kamera PTZ Optics
- Kamera AquaTech
Nyeste Kamera Manualer
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
24 Oktober 2024
24 Oktober 2024
22 Oktober 2024
22 Oktober 2024
19 Oktober 2024
16 Oktober 2024
16 Oktober 2024