Intellinet 507332 Bruksanvisning
Intellinet
Audio/video-konverter
507332
Les nedenfor 📖 manual på norsk for Intellinet 507332 (16 sider) i kategorien Audio/video-konverter. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/16
FAST ETHERNET
MEDIA CONVERTER
INSTRUCTIONS
MODELS 506502, 506519, 507332
INT-506502/506519/507332-UM-ML1-1015-02
Important: Read before use. • Importante: Leer antes de usar.
intellinetnetwork.com
2
ENGLISH
Fast Ethernet Media Converter English
Thank you for purchasing the Intellinet Fast Ethernet Media
Converter. Media converters connect two Ethernet networks over
a longer distance using fiber optic cable.
MODELS
• 506502:
Fast Ethernet Media Converter
10/100Base-TX to 100Base-FX (SC) Multimode, 2 km (1.24 mi.)
•506519:
Fast Ethernet Media Converter
10/100Base-TX to 100Base-FX (ST) Multimode, 2 km (1.24 mi.)
•507332:
Fast Ethernet Single Mode Media Converter
10/100Base-TX to 100Base-FX (SC) Single Mode, 20 km (12.4 mi.)
CONNECTIONS
TwistedPair–RJ45
Connect the UTP port of the media converter to an RJ45 port on
the network; e.g., to an Ethernet switch. Cat5e or better cabling is
recommended.
Fiber Optic
As shown above, two fiber optic cables need to be connected be-
tween two ideally identical media converters. Make a connection
MediaConverter1
MediaConverter2
RJ45
RJ45
TX
TX RX
RX
OPTICAL FIBER
ETHERNET1 ETHERNET2
Twisted Pair
Twisted Pair
ENGLISH 3
from Media Converter 1 TX to Media Converter 2 RX, and from
Media Converter 1 RX to Media Converter 2 TX. Maximum length
and fiber cable specification depend on the model. (See Models.)
POWER
Plug the power adapter into the 5 V DC input jack on the media
converter, then connect it to a regular power outlet. Only use
the included power adapter or one with matching specifications
(output of 5 V DC, at least 1 A).
LEDS
PWR – The power adapter is connected when lit.
100M – 100 Mbps link on the twisted pair connection when lit;
10 Mbps link or no link if unlit.
Link/Act(TP=RJ45;FP=Fiber) – Active link when lit; data traffic
when flashing; no active network link when unlit.
FDX/COL(forTP/RJ45) – Full duplex connection when lit; data
collisions when flashing; half duplex when unlit.
SD(forFP/Fiber) – Fiber optic signal is detected when lit; no
signal when unlit.
For specifications, go to intellinetnetwork.com.
Produkspesifikasjoner
Merke: | Intellinet |
Kategori: | Audio/video-konverter |
Modell: | 507332 |
Trenger du hjelp?
Hvis du trenger hjelp med Intellinet 507332 still et spørsmål nedenfor, og andre brukere vil svare deg
Audio/video-konverter Intellinet Manualer
27 Oktober 2024
27 Oktober 2024
22 Oktober 2024
22 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Audio/video-konverter Manualer
- Audio/video-konverter D-Link
- Audio/video-konverter StarTech.com
- Audio/video-konverter Smart-AVI
- Audio/video-konverter RME
- Audio/video-konverter MuxLab
- Audio/video-konverter Evolution
- Audio/video-konverter Trendnet
- Audio/video-konverter WyreStorm
- Audio/video-konverter Key Digital
- Audio/video-konverter Sescom
- Audio/video-konverter Gefen
- Audio/video-konverter ShieldRock
- Audio/video-konverter Data-Tronix
- Audio/video-konverter Digitalinx
- Audio/video-konverter Comprehensive
- Audio/video-konverter Ocean Matrix
- Audio/video-konverter AVPro Edge
- Audio/video-konverter Sabrent
Nyeste Audio/video-konverter Manualer
28 Oktober 2024
28 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
24 Oktober 2024