Intellinet 510493 Bruksanvisning
Intellinet
Audio/video-konverter
510493
Les nedenfor 📖 manual på norsk for Intellinet 510493 (16 sider) i kategorien Audio/video-konverter. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/16
Gigabit Ethernet to
SFP Media Converter
Instructions
Model 510493
INT-510493-UM-ML1-1015- 02
Important: Read before use. • Importante: Leer antes de usar.
intellinetnetwork.com
2
ENGLISH
Gigabit Ethernet to SFP Media Converter English
Thank you for purchasing the Intellinet Gigabit Ethernet
Media Converter. Media converters connect two Ethernet
networks over a longer distance using ber optic cable.
MODEL
Gigabit Ethernet Multi Mode Media Converter (510493)
10/100/1000Base-TX to 1000Base-SX Multi-
Mode/1000Base-LX Single-Mode (SFP slot, empty)
COnnECtiOns
Twisted Pair – RJ45
Connect the UTP port of the media converter to an RJ45
port on the network; e.g., to an Ethernet switch. Cat5e or
better cabling is recommended.
SFP Slot
This media converter does not come with integrated ber
ports, instead it takes an SFP transceiver module (1.25
Gbps), which provides the ber optic ports. As shown
above, two ber optic cables need to be connected
between two ideally identical media converters. Make a
connection from Media Converter 1 TX to Media Converter
Media Converter 1
Media Converter 2
RJ45
RJ45
TX
TX RX
RX
OPTICAL FIBER
ETHERNET 1 ETHERNET 2
Twisted Pair
Twisted Pair
ENGLISH 3
2 RX, and from Media Converter 1 RX to Media Converter
2 TX. Maximum length and ber cable specication
depend on the model. (See Specications.)
POwEr
Plug the power adapter into the 5 V DC input jack on
the media converter, then connect it to a regular power
outlet. Only use the included power adapter or one with
matching specications (output of 5 V DC, at least 1 A).
LEDs
PWR – The power adapter is connected when lit.
1000M – 1000 Mbps link on the twisted pair connection
when lit.
Link/Act (TP = RJ45; FP = Fiber) – Active link when lit; data
trac when ashing; no active network link when unlit.
FDX/COL (for TP/RJ45) – Full duplex connection when lit;
data collisions when ashing; half duplex when unlit.
SD (for FP/Fiber) – Fiber optic signal is detected when lit;
no signal when unlit.
For specications, go to intellinetnetwork.com.
Produkspesifikasjoner
| Merke: | Intellinet |
| Kategori: | Audio/video-konverter |
| Modell: | 510493 |
Trenger du hjelp?
Hvis du trenger hjelp med Intellinet 510493 still et spørsmål nedenfor, og andre brukere vil svare deg
Audio/video-konverter Intellinet Manualer
27 Oktober 2024
27 Oktober 2024
22 Oktober 2024
22 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Audio/video-konverter Manualer
- Audio/video-konverter D-Link
- Audio/video-konverter StarTech.com
- Audio/video-konverter Smart-AVI
- Audio/video-konverter RME
- Audio/video-konverter MuxLab
- Audio/video-konverter Evolution
- Audio/video-konverter Trendnet
- Audio/video-konverter WyreStorm
- Audio/video-konverter Key Digital
- Audio/video-konverter Sescom
- Audio/video-konverter Gefen
- Audio/video-konverter ShieldRock
- Audio/video-konverter Data-Tronix
- Audio/video-konverter Digitalinx
- Audio/video-konverter Comprehensive
- Audio/video-konverter Ocean Matrix
- Audio/video-konverter AVPro Edge
- Audio/video-konverter Sabrent
Nyeste Audio/video-konverter Manualer
28 Oktober 2024
28 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
24 Oktober 2024