Intellinet 562003 Bruksanvisning

Les nedenfor 📖 manual på norsk for Intellinet 562003 (16 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/16
Scan to
register your
product warranty
Important: Read before use. • Importante: Leer antes de usar.
For additional benets:
or go to: register.intellinet-network.com/r/562003
10-Port L2+ Fully Managed
PoE++ Switch with 8 Gigabit
Ethernet Ports and 2 SFP Uplinks
Instructions Model 562003 (IPS-10GM02-242W)
2
This guide presents the basic steps to set up and operate this device.
For the user manual and specifications, visit . Register your product intellinet-network.com
at register.intellinet-network.com/r/562003 or scan the QR code on the cover.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface that can support the weight of the switch
(and any other items that need to be considered);
• with a minimum of 25 mm (approx. 1”) of
clearance on the top and sides for adequate ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• where it cannot be affected by excessive moisture;
• within 100 m (approx. 328’) of network devices (RJ45) it’s to be connected to.
The switch includes brackets and screws for optional rack mounting.
1 Disconnect any cables from the switch.
2 Position a bracket over the mounting holes on one side
of the switch and secure it in place with screws.
3 Repeat Step 2 on the other side of the switch.
4 Position the switch in the rack and screw
the brackets to the rack.
5 Reconnect any cables.
Chassis Ground Column
Located on the side of the power supply connector, a grounding
terminal connector is used to provide proper grounding for your switch.
It should be wired to an object that provides earth ground.
Connections
English
Instructions
3
English
All ports on the switch support Auto-MDI/MDI-X functionality, so
you can use straight or crossover UTP/STP cables to connect the
RJ45 ports to PCs, routers, hubs, other switches, etc.
Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn’t
indicate a link or activity, check the corresponding device for proper setup and operation.
Use the included power cable to connect the receptacle
on the back of the switch to a power outlet.
Ports 1 – 8 can provide power to a connected powered device (PoE++ output
up to 90 watts on ports 7 and 8; PoE+ output up to 30 watts on ports 1
through 6); all powered devices should comply with IEEE 802.3bt/at/af.
LED Color Status Operation
PWR Green On Unit is receiving power.
Off Check connection.
Link/Act/
Speed
1-8
10/100M:
Orange
1000M:
Green
On Valid port connection.
Flashing Data is transmitted/received
Off No link established.
PoE 1-8 Green On The connected powered device (PD) is receiving power.
Orange Off No PD device is linked.
9S-10S
(SFP) Green
On Valid port connection.
Flashing Data is transmitted/received
Off No link established.
* NOTE: Press the Mode button to alternate between Link or PoE Status.
Basic Web-Based Browser Management
1 Open your Web browser.
2 http://Enter and the IP address of the switch in the Address field.
The default management IP address is . 192.168.2.1
3 Press to display the login screen. In the Username field, enter ; in the Enter admin
Password field, enter the on the bottom of the switch. Click .serial number OK
Instructions

Produkspesifikasjoner

Merke: Intellinet
Kategori: Ikke kategorisert
Modell: 562003

Trenger du hjelp?

Hvis du trenger hjelp med Intellinet 562003 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Intellinet Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer