IOptron HAE16C Bruksanvisning
Les nedenfor 📖 manual på norsk for IOptron HAE16C (6 sider) i kategorien Stativ. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/6
1
iOptron Corp. | 1 Merrill Street | Woburn, MA01801USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com
Quick Start Guide
HAE16C Dual AZ/EQ SWG Hybrid Mount
PACKAGE CONTENTS1
Telescope mount HAE16C w/built-in Wi- Fi
AC adapter -240V, 12V 5A DC output (for indoor use only) –100
USB 2.0 cable
Hard carrying case
Oponal Go2Nova® 8411 OLED handset with control cable
Oponal external iPolar (#3339)
Oponal carbon ber tripod (#8061)
Oponal counterweight sha P-SGP-CWS and counterweight 3006- ) (# ) (# 05
ONLINE RESOURCES www.iOptron.com ( )
User’s Manual
Hand controller and mount rmware upgrades (check online for the latest version)
ASCOM drive, Commander, Commander Lite and other computer control
1Contents and design may change from me to me without noce.
2
iOptron Corp. | 1 Merrill Street | Woburn, MA01801USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com
Please hold the telescope when disengaging the DEC Gear Switch. An HAE mount is operated
under unbalanced condions and could be pped o if the tripod is not secured.
1. Remove mount head from package:
2. Set Latude Range: An HAE16C has two latude
range sengs: 0~47° and 43~90°. The default seng
is 0~47° (front latude hole). You may change the
latude range based on your locaon or if an
altazimuth (AA) mode is desired. Slightly loosen
Altude Locking Knob. Use a at head screw driver to
remove the Latude Locking Pin. Adjust the mount so
that the hole on the brass latude eyebolt is aligned
to the high latude posion hole. Insert the Locking
Pin to secure it.
3. Set up tripod: An HAE16C mount uses -a 3/8” 16
threaded hole for aachment. So a camera tripod or
other tripod with a 3/8”-16 mounng post can be
used. Shown here is an iOptron carbon ber tripod
#8061/#8061A.
4. Aach mount head: Thread the mount head onto the
tripod head and secure it.
Level the mount by adjusng the tripod legs Use the .
built-in Bubble Level Indicator on the mount base or
an external leveler for this purpose.
5. Adjust latude: To adjust the latude, slightly loosen
the Altude Locking Knob. Use the Latude
Adjustment Knob to move the mount to the desired
latude by aligning the Latude Mark Line to the
Latude Scale. Tighten the Alt. Locking Knob.
3/8”-16 mounting post
Lat. Scale
Lat. Range
Locking Pin
High Latitude
Lat. Adj.
Knob
Alt. Locking
Knob
3
iOptron Corp. | 1 Merrill Street | Woburn, MA01801USA | (781) 569-0200 | Toll Free (866) 399-4587 | www.iOptron.com
6. Install telescope: An HAE16C mount accepts a Vixen
dovetail mounng plate.
Release the dovetail Saddle Locking Lever and slide
the telescope dove il plate into the saddle with Gear ta
Switch disengaged. Make sure that the arrow sign on
the saddle is poinng forward. Tighten the Saddle
Locking Lever.
The locking levers on an HAE16C mount are ratchet
ones. Pull the lever handle and turn it to the posion
that the lever is parallel to the saddle or points
towards the scope to prevent it interfering with the
DEC unit during mount GOTO and tracking.
7. Balance payload: No RA balance is needed for an
HAE16C mount.
Turn the mount power on. Press number 9 to change
the slew speed to max. Press or button to slew ◄ ►
the telescope to one side of the mount. Hold the
telescope and disengage DEC Gear Switch to check
the balance Release the dovetail saddle locking lever .
and move the scope back and forth to adjust the
posion. Tighten the dovetail saddle locking lever and
engage the gear switch aer balancing is completed.
Return the mount to Zero Posion aer balancing
and engage the DEC gear switch.
8. Install counterweight bar and CW: The mount is
designed to operate without a counterweight (CW). If
you want to use an oponal CW, the CW sha
mounng hole is 3/8”-16 threaded. Thread in a CW
shaf ( -SGP-CWS and install a 5 lbs CW ((#3006-t #P )
05) .
9. Connect DC power and handset: Plug in a 12V DC
power supply to the socket on the base. DC12V IN
If you have an oponal Go2Nova® 8411 handset, plug
it into the 6P6C handset port on the mount.
10. Mount control via a SmartPhone/Tablet: The mount
can be controlled by the iOptron Commander Lite
app for inial sengs, as well as slew, GOTO and
tracking.
Turn the mount power on. Check your SmartPhone
WIFI seng and connect to a WIFI device named
HAECser_XXXXXX.
Locking Lever
Produkspesifikasjoner
| Merke: | IOptron |
| Kategori: | Stativ |
| Modell: | HAE16C |
Trenger du hjelp?
Hvis du trenger hjelp med IOptron HAE16C still et spørsmål nedenfor, og andre brukere vil svare deg
Stativ IOptron Manualer
12 Januar 2025
12 Januar 2025
4 Januar 2025
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Stativ Manualer
- Stativ Bauhn
- Stativ Hama
- Stativ Neewer
- Stativ Godox
- Stativ Kogan
- Stativ DJI
- Stativ Sony
- Stativ Vello
- Stativ Pyle
- Stativ Manfrotto
- Stativ Kodak
- Stativ Celly
- Stativ Sachtler
- Stativ Tiltall
- Stativ Square Jellyfish
- Stativ Proaim
- Stativ Libec
- Stativ Gravity
- Stativ Alpine
- Stativ Celestron
- Stativ Glide Gear
- Stativ Vanguard
- Stativ Vinten
- Stativ Stalco
- Stativ Auray
- Stativ SteadiCam
- Stativ ARRI
- Stativ Fidlock
- Stativ Vortex
- Stativ Robus
- Stativ Miller
- Stativ Studio Assets
- Stativ Easyrig
- Stativ Magnus
- Stativ Peak Design
- Stativ Hohem
- Stativ Flycam
- Stativ IFootage
- Stativ Cartoni
- Stativ HPRC
- Stativ Really Right Stuff
- Stativ Rollei
- Stativ FeiyuTech
- Stativ Velbon
- Stativ 3 Legged Thing
- Stativ FLM
Nyeste Stativ Manualer
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
14 Januar 2025
14 Januar 2025